IPAC2019 - List of Authors (Echevarria, P.)

Paper	Title	Page
WEPRB016	Simulation of Quench Detection Algorithms for Helmholtz Zentrum Berlin SRF Cavities	2834
	P. Echevarria, A. Neumann, A. Ushakov HZB, Berlin, Germany B. Garcia UPV-EHU, Leioa, Spain J. Jugo University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
	The Helmholtz Zentrum Berlin is carrying out two accelerator projects which make use of high gradient SRF cavities: BERLinPro* and BESSY-VSR. In both projects, a prompt detection of a quench is crucial to avoid damages in the cryomodules and cavities themselves. In this paper, the response of real time estimation of the cavity parameters* using the transmitted and forward RF signals is simulated, in order to perform the quench detection. The time response of the estimated half bandwidth is compared with the dissipated power in the cavity walls for the different type of SRF cavities used in both projects, i.e., BERLinPro’s photoinjector, booster and linac, and BESSY-VSR 1.5 GHz and 1.75 GHz cavities. As an intermediate step prior to the implementation in an mTCA.4 system together with the LLRF control and test with a real cavity, the algorithm has been implemented using a National Instruments FPGA board to check the its proper behavior.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB016
About •	paper received ※ 16 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation of Quench Detection Algorithms for Helmholtz Zentrum Berlin SRF Cavities

2834

P. Echevarria, A. Neumann, A. Ushakov
HZB, Berlin, Germany
B. Garcia
UPV-EHU, Leioa, Spain
J. Jugo
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain

The Helmholtz Zentrum Berlin is carrying out two accelerator projects which make use of high gradient SRF cavities: BERLinPro* and BESSY-VSR**. In both projects, a prompt detection of a quench is crucial to avoid damages in the cryomodules and cavities themselves. In this paper, the response of real time estimation of the cavity parameters*** using the transmitted and forward RF signals is simulated, in order to perform the quench detection. The time response of the estimated half bandwidth is compared with the dissipated power in the cavity walls for the different type of SRF cavities used in both projects, i.e., BERLinPro’s photoinjector, booster and linac, and BESSY-VSR 1.5 GHz and 1.75 GHz cavities. As an intermediate step prior to the implementation in an mTCA.4 system together with the LLRF control and test with a real cavity, the algorithm has been implemented using a National Instruments FPGA board to check the its proper behavior.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB016

About •

paper received ※ 16 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)