IPAC2019 - List of Authors (Dallin, L.O.)

Paper	Title	Page
TUPGW004	Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends	1385
	L.O. Dallin CLS, Saskatoon, Saskatchewan, Canada
	A preliminary design for a new storage for the Canadian Light Source was presented at IPAC’18 (Dallin). More recently a reconfigured lattice was presented at the 6th DLSR workshop. This lattice employed large βy and small βx in the straights. This has several advantages including: increased transverse coherence and brighter beams at small coupling; round beams at small coupling; flatter βy through the straights; and possible off-axis vertical injection at small amplitudes. Most recently longitudinal gradients in the dipoles have been implemented. This has lead to the unit cell bends being replaced by a ’pseudo longitudinal gradient’ bend array: bend1-bend2-bend1. This results in smaller emittance with simple magnet designs while maintaining adequate dynamic aperture for off-axis injection.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW004
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW095	Progress on a Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring	1635
	S.C. Leemann, F. Sannibale LBNL, Berkeley, California, USA M. Aiba, A. Streun PSI, Villigen PSI, Switzerland J. Bengtsson DLS, Oxfordshire, United Kingdom L.O. Dallin CLS, Saskatoon, Saskatchewan, Canada
	Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract No. DEAC02-05CH11231. The ALS Upgrade to a diffraction-limited soft x-ray storage ring calls for ultralow emittance in a very limited circumference. In this paper we report on progress with a lattice based on a 7BA with distributed chromatic correction. This lattice relies heavily on longitudinal gradient bends and reverse bending in order to suppress the emittance, so that, despite having only seven bends, ultralow emittance can be achieved in addition to large dynamic aperture and momentum acceptance. An initial alternate 7BA lattice has been revised to relax magnet requirements as well as further increase off-energy performance and resilience to machine imperfections. We now demonstrate ±2.5 mm dynamic aperture including errors and calculate the effect of IBS to show that this lattice achieves 6 hours Touschek lifetime (at 500 mA, including errors) and a brightness of roughly 3x10²¹ ph/s/mm²/mrad²/0.1%BW at 1 keV.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW095
About •	paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS3	Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation	4376
SUSPFO003	use link to see paper's listing under its alternate paper code
	N. Samadi University of Saskatchewan, Saskatoon, Canada L.D. Chapman, L.O. Dallin CLS, Saskatoon, Saskatchewan, Canada X. Shi ANL, Argonne, Illinois, USA
	We will report on a system (ps-BPM) that can measure the electron source vertical position and angular motion along with the vertical source size and angular size at a single location in a synchrotron bend magnet beamline. This system uses a combination of a monochromator and a filter with a K-edge to which the monochromator was tuned in energy. The vertical distribution of the beam with and without the filter was simultaneously visualized with an imaging detector. The small range of angles from the source onto the monochromator crystals creates an energy range that allows part of the beam to be below the K-edge and the other part above. Measurement of the beam vertical location without the absorber and edge vertical location with the absorber allowes measurement of the source position and angle. The beam width and edge width give information about the vertical electron source size and angular distribution. The ps-BPM measurements have been made where the electron beam size and angular distribution was adjusted using skew quads. The ps-BPM measurements correlate well with modeling of the ps-BPM system as well as conventional beam size measurements using a pinhole. A phase-space beam position monitor for synchrotron radiation. J Synchrotron Radiat, 2015. 22(4): p. 946-55.
	Slides FRXXPLS3 [4.593 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS3
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends

1385

L.O. Dallin
CLS, Saskatoon, Saskatchewan, Canada

A preliminary design for a new storage for the Canadian Light Source was presented at IPAC’18 (Dallin). More recently a reconfigured lattice was presented at the 6th DLSR workshop. This lattice employed large βy and small βx in the straights. This has several advantages including: increased transverse coherence and brighter beams at small coupling; round beams at small coupling; flatter βy through the straights; and possible off-axis vertical injection at small amplitudes. Most recently longitudinal gradients in the dipoles have been implemented. This has lead to the unit cell bends being replaced by a ’pseudo longitudinal gradient’ bend array: bend1-bend2-bend1. This results in smaller emittance with simple magnet designs while maintaining adequate dynamic aperture for off-axis injection.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW004

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW095

Progress on a Novel 7BA Lattice for a 196-m Circumference Diffraction-Limited Soft X-Ray Storage Ring

1635

S.C. Leemann, F. Sannibale
LBNL, Berkeley, California, USA
M. Aiba, A. Streun
PSI, Villigen PSI, Switzerland
J. Bengtsson
DLS, Oxfordshire, United Kingdom
L.O. Dallin
CLS, Saskatoon, Saskatchewan, Canada

Funding: Work supported by the Director of the Office of Science of the US Department of Energy under Contract No. DEAC02-05CH11231.
The ALS Upgrade to a diffraction-limited soft x-ray storage ring calls for ultralow emittance in a very limited circumference. In this paper we report on progress with a lattice based on a 7BA with distributed chromatic correction. This lattice relies heavily on longitudinal gradient bends and reverse bending in order to suppress the emittance, so that, despite having only seven bends, ultralow emittance can be achieved in addition to large dynamic aperture and momentum acceptance. An initial alternate 7BA lattice has been revised to relax magnet requirements as well as further increase off-energy performance and resilience to machine imperfections. We now demonstrate ±2.5 mm dynamic aperture including errors and calculate the effect of IBS to show that this lattice achieves 6 hours Touschek lifetime (at 500 mA, including errors) and a brightness of roughly 3x10²¹ ph/s/mm²/mrad²/0.1%BW at 1 keV.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW095

About •

paper received ※ 14 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRXXPLS3

Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation

4376

SUSPFO003

use link to see paper's listing under its alternate paper code

N. Samadi
University of Saskatchewan, Saskatoon, Canada
L.D. Chapman, L.O. Dallin
CLS, Saskatoon, Saskatchewan, Canada
X. Shi
ANL, Argonne, Illinois, USA

We will report on a system (ps-BPM) that can measure the electron source vertical position and angular motion along with the vertical source size and angular size at a single location in a synchrotron bend magnet beamline*. This system uses a combination of a monochromator and a filter with a K-edge to which the monochromator was tuned in energy. The vertical distribution of the beam with and without the filter was simultaneously visualized with an imaging detector. The small range of angles from the source onto the monochromator crystals creates an energy range that allows part of the beam to be below the K-edge and the other part above. Measurement of the beam vertical location without the absorber and edge vertical location with the absorber allowes measurement of the source position and angle. The beam width and edge width give information about the vertical electron source size and angular distribution. The ps-BPM measurements have been made where the electron beam size and angular distribution was adjusted using skew quads. The ps-BPM measurements correlate well with modeling of the ps-BPM system as well as conventional beam size measurements using a pinhole.
* A phase-space beam position monitor for synchrotron radiation. J Synchrotron Radiat, 2015. 22(4): p. 946-55.

Slides FRXXPLS3 [4.593 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-FRXXPLS3

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)