IPAC2019 - List of Authors (Chavez, D.C.V.)

Paper	Title	Page
MOPMP049	6 T Cable-in-conduit Dipole to Double the Ion Energy for JLEIC	556
	P.M. McIntyre, J. Breitschopf, J. Gerity Texas A&M University, College Station, USA J. Breitschopf, D.C.V. Chavez, J.N. Kellams, A. Sattarov ATC, College Station, Texas, USA
	The proposed electron-ion collider JLEIC would make high-luminosity collisions of polarized ions and polarized electrons with electron energy up to 12 GeV and ion energy up to 40 GeV/u. Both the luminosity and the collision energy could be increased by doubling the dipole field in the ion ring from 3 T to 6 T, and the enhanced performance would access the full range of parameters for the physics objectives of the project. The Texas A&M group has developed the large-aperture 3 T dipoles for the baseline project, based upon a novel superconducting cable-in-conduit. (CIC). A closely similar 6 T design is being developed, utilizing a 2-layer CIC. Details of the magnet design and development of the 2-layer CIC will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP049
About •	paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP048	LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable	552
	P.M. McIntyre Texas A&M University, College Station, USA J. Breitschopf, J.N. Kellams, A. Sattarov ATC, College Station, Texas, USA D.C.V. Chavez Universidad de Guanajuato, División de Ciencias e Ingenierías, León, Mexico
	There is new physics-driven interest in the concept of an LHC doubler with collision energy of 30 TeV and high luminosity. The cost-driver challenge for its feasibility is the ring of 16 T dual dipoles. Recent developments in cable-in-conduit (CIC) technology offer significant benefit for this purpose. The CIC windings provide robust stress management at the cable level and facilitate forming of the flared ends without degradation. The CIC windings provide a basis for hybrid windings, in which the innermost layers that operate in high field utilize Bi-2212, the center layers utilize Nb₃Sn, and the outer layers utilize NbTi. Cryogen flows through the interior of all cables, so that heat transfer can be optimized throughout the windings. The design of the 18 T dipole and the 23 kA CIC conductor will be presented. Particular challenges for integration in an LHC doubler will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP048
About •	paper received ※ 18 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

6 T Cable-in-conduit Dipole to Double the Ion Energy for JLEIC

556

P.M. McIntyre, J. Breitschopf, J. Gerity
Texas A&M University, College Station, USA
J. Breitschopf, D.C.V. Chavez, J.N. Kellams, A. Sattarov
ATC, College Station, Texas, USA

The proposed electron-ion collider JLEIC would make high-luminosity collisions of polarized ions and polarized electrons with electron energy up to 12 GeV and ion energy up to 40 GeV/u. Both the luminosity and the collision energy could be increased by doubling the dipole field in the ion ring from 3 T to 6 T, and the enhanced performance would access the full range of parameters for the physics objectives of the project. The Texas A&M group has developed the large-aperture 3 T dipoles for the baseline project, based upon a novel superconducting cable-in-conduit. (CIC). A closely similar 6 T design is being developed, utilizing a 2-layer CIC. Details of the magnet design and development of the 2-layer CIC will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP049

About •

paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP048

LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable

552

P.M. McIntyre
Texas A&M University, College Station, USA
J. Breitschopf, J.N. Kellams, A. Sattarov
ATC, College Station, Texas, USA
D.C.V. Chavez
Universidad de Guanajuato, División de Ciencias e Ingenierías, León, Mexico

There is new physics-driven interest in the concept of an LHC doubler with collision energy of 30 TeV and high luminosity. The cost-driver challenge for its feasibility is the ring of 16 T dual dipoles. Recent developments in cable-in-conduit (CIC) technology offer significant benefit for this purpose. The CIC windings provide robust stress management at the cable level and facilitate forming of the flared ends without degradation. The CIC windings provide a basis for hybrid windings, in which the innermost layers that operate in high field utilize Bi-2212, the center layers utilize Nb₃Sn, and the outer layers utilize NbTi. Cryogen flows through the interior of all cables, so that heat transfer can be optimized throughout the windings. The design of the 18 T dipole and the 23 kA CIC conductor will be presented. Particular challenges for integration in an LHC doubler will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP048

About •

paper received ※ 18 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)