IPAC2019 - List of Authors (Bence, A.)

Paper	Title	Page
MOPGW010	First Application of Online Particle Swarm Optimization at SOLEIL	82
	A. Bence, L.S. Nadolski SOLEIL, Gif-sur-Yvette, France J. Li HZB, Berlin, Germany
	First attempts of online optimisation of SOLEIL using Particle Swarm Optimisation (PSO) is reported with two major applications. This technique proves to be particularly suitable in a control room and could become a standard operation tool for tuning the accelerators in complement of other techniques. The first optimisation of the injection in the storage ring will be presented using the injection septa and the vertical correctors of the booster to storage ring transfer line. The second work will summarise the results obtained from the optimisation of the transverse on- and off-momentum dynamics in presence of insertion devices. Main results, the implementation and improvements will be presented and discussed thoroughly.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW010
About •	paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW097	SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections	350
	A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux SOLEIL, Gif-sur-Yvette, France
	The design for the upgrade of the SOLEIL third generation light source is progressing. At the present stage, different lattices are evaluated as possible candidates for the storage ring upgrade and an important factor for the comparison of their performances is the robustness against lattice imperfections. The strategy for this study consists in defining a set of misalignments of the lattice elements and field errors of the magnets that are expected to be attained after the commissioning, applying them to the lattice models and correcting them using response matrix based techniques. A dedicated algorithm was developed in Accelerator Toolbox in order to accomplish this procedure and compare the different lattices. In this paper the results of this study at the current state are presented, including the considered lattice imperfections, the correction method applied and the final performance of the lattices.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW097
About •	paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB005	Study of Higher-Order Achromat Lattice as an Alternative Option for the SOLEIL Storage Ring Upgrade	586
	R. Nagaoka, A. Bence, P. Brunelle, L. Hoummi, A. Loulergue, A. Nadji, L.S. Nadolski, M.-A. Tordeux, A. Vivoli SOLEIL, Gif-sur-Yvette, France A. Gamelin LAL, Orsay, France
	A ring composed of 20 symmetrical 7BA cells in which of a pair of chromaticity correcting sextupoles placed around horizontal dispersion bumps à la ESRF-EBS was developed as a baseline lattice for the SOLEIL storage ring upgrade (presented at IPAC2018). The strict phase relation between the two dispersion bumps provides an efficient way of optimizing the (on-momentum) nonlinear optics with a limited number of sextupoles. As an alternative, a scheme known as Higher-Order Achromat (HOA) develops a MBA (Multi-Bend Achromat) lattice where chromaticity correcting sextupoles are distributed in each M unit cell with a strict phase relation cell-wise such as to cancel basic geometric and chromatic resonance driving terms. The beam dynamics in a 20-fold 7BA HOA ring is compared with those of the baseline lattice, with focus on off-momentum properties such as Touschek lifetime, which are important for medium energy rings like SOLEIL. The robustness against errors, the reduction of the ring symmetry by introducing 4 longer straight sections, as well as a horizontal dispersion bump to cope with longitudinal on-axis injection scheme are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB005
About •	paper received ※ 22 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS011	Intra-Beam Scattering Effect in the SOLEIL Storage Ring Upgrade	3106
	A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux SOLEIL, Gif-sur-Yvette, France
	As the work on the design of the upgrade of SOLEIL storage ring advances, the study of the impact of Intra-Beam Scattering (IBS) on the equilibrium emittance is also progressing, showing a significant contribution of this effect. Different measures can be taken to mitigate the emittance dilution, like operating the machine with full transverse coupling and using harmonic cavities to increase bunch length. The calculation of the IBS effect needs then to take into account the different beam dynamics and its effect on the particle distribution. In this paper the current state of the ongoing study is presented, reporting on the results obtained for the different options considered, and comparing the results of different codes and their implicit assumptions.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS011
About •	paper received ※ 14 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First Application of Online Particle Swarm Optimization at SOLEIL

82

A. Bence, L.S. Nadolski
SOLEIL, Gif-sur-Yvette, France
J. Li
HZB, Berlin, Germany

First attempts of online optimisation of SOLEIL using Particle Swarm Optimisation (PSO) is reported with two major applications. This technique proves to be particularly suitable in a control room and could become a standard operation tool for tuning the accelerators in complement of other techniques. The first optimisation of the injection in the storage ring will be presented using the injection septa and the vertical correctors of the booster to storage ring transfer line. The second work will summarise the results obtained from the optimisation of the transverse on- and off-momentum dynamics in presence of insertion devices. Main results, the implementation and improvements will be presented and discussed thoroughly.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW010

About •

paper received ※ 19 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPGW097

SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections

350

A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette, France

The design for the upgrade of the SOLEIL third generation light source is progressing. At the present stage, different lattices are evaluated as possible candidates for the storage ring upgrade and an important factor for the comparison of their performances is the robustness against lattice imperfections. The strategy for this study consists in defining a set of misalignments of the lattice elements and field errors of the magnets that are expected to be attained after the commissioning, applying them to the lattice models and correcting them using response matrix based techniques. A dedicated algorithm was developed in Accelerator Toolbox in order to accomplish this procedure and compare the different lattices. In this paper the results of this study at the current state are presented, including the considered lattice imperfections, the correction method applied and the final performance of the lattices.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPGW097

About •

paper received ※ 14 May 2019 paper accepted ※ 17 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRB005

Study of Higher-Order Achromat Lattice as an Alternative Option for the SOLEIL Storage Ring Upgrade

586

R. Nagaoka, A. Bence, P. Brunelle, L. Hoummi, A. Loulergue, A. Nadji, L.S. Nadolski, M.-A. Tordeux, A. Vivoli
SOLEIL, Gif-sur-Yvette, France
A. Gamelin
LAL, Orsay, France

A ring composed of 20 symmetrical 7BA cells in which of a pair of chromaticity correcting sextupoles placed around horizontal dispersion bumps à la ESRF-EBS was developed as a baseline lattice for the SOLEIL storage ring upgrade (presented at IPAC2018). The strict phase relation between the two dispersion bumps provides an efficient way of optimizing the (on-momentum) nonlinear optics with a limited number of sextupoles. As an alternative, a scheme known as Higher-Order Achromat (HOA) develops a MBA (Multi-Bend Achromat) lattice where chromaticity correcting sextupoles are distributed in each M unit cell with a strict phase relation cell-wise such as to cancel basic geometric and chromatic resonance driving terms. The beam dynamics in a 20-fold 7BA HOA ring is compared with those of the baseline lattice, with focus on off-momentum properties such as Touschek lifetime, which are important for medium energy rings like SOLEIL. The robustness against errors, the reduction of the ring symmetry by introducing 4 longer straight sections, as well as a horizontal dispersion bump to cope with longitudinal on-axis injection scheme are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPRB005

About •

paper received ※ 22 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS011

Intra-Beam Scattering Effect in the SOLEIL Storage Ring Upgrade

3106

A. Vivoli, A. Bence, P. Brunelle, A. Gamelin, L. Hoummi, A. Loulergue, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette, France

As the work on the design of the upgrade of SOLEIL storage ring advances, the study of the impact of Intra-Beam Scattering (IBS) on the equilibrium emittance is also progressing, showing a significant contribution of this effect. Different measures can be taken to mitigate the emittance dilution, like operating the machine with full transverse coupling and using harmonic cavities to increase bunch length. The calculation of the IBS effect needs then to take into account the different beam dynamics and its effect on the particle distribution. In this paper the current state of the ongoing study is presented, reporting on the results obtained for the different options considered, and comparing the results of different codes and their implicit assumptions.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS011

About •

paper received ※ 14 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)