IPAC2018 - List of Authors (Kersevan, R.)

Paper	Title	Page
MOZGBE5	Results on the FCC-hh Beam Screen at the KIT Electron Storage Ring KARA	55
	L.A. Gonzalez, V. Baglin, P. Chiggiato, C. Garion, M. Gil Costa, R. Kersevan CERN, Geneva, Switzerland I. Bellafont, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain S. Casalbuoni, E. Huttel KIT, Eggenstein-Leopoldshafen, Germany
	Funding: * The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union's Horizon 2020 research and innovation programme under grant No 654305. In the framework of the EuroCirCol collaboration* (work package 4 "Cryogenic Beam Vacuum System"), the fabrication of 3 FCC-hh beam-screen (BS) prototypes has been carried out with the aim of testing them at room temperature at the Karlsruhe Institute of Technology (KIT) 2.5 GeV electron storage ring KARA (KArlsruhe Research Accelerator). The 3 BS prototypes will be tested on a beamline installed by the collaboration, named as BEam Screen TEstbench EXperiment (BESTEX). KARA has been chosen because its synchrotron radiation (SR) spectrum, photon flux and power, match the one foreseen for the 50+50 TeV FCC-hh proton collider. Each of the 3 BS prototypes, 2 m in length, implement a different design feature: 1) baseline design (BD), with electro-deposited copper and no electron-cloud (EC) mitigation features; 2) BD with set of distributed cold-sprayed anti-EC clearing electrodes; 3) BD with laser-ablated anti-EC surface texturing. We present here the results obtained so far at BESTEX and the comparison with extensive montecarlo simulations of the expected outgassing behavior under synchrotron radiation. The information herein only reflects the views of its authors and the European Commission is not responsible for any use that may be made of the information.
	Slides MOZGBE5 [4.318 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOZGBE5
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF064	High-Energy LHC Design	269
	F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann CERN, Geneva, Switzerland J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt JAI, Oxford, United Kingdom A. Apyan ANSL, Yerevan, Armenia J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco EPFL, Lausanne, Switzerland F. Burkart DESY, Hamburg, Germany Y. Cai, Y.M. Nosochkov SLAC, Menlo Park, California, USA G. Guillermo Cantón CINVESTAV, Mérida, Mexico K. Ohmi, K. Oide, D. Zhou KEK, Ibaraki, Japan
	In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF085	Beam-gas Background Characterization in the FCC-ee IR	322
	M. Boscolo, O.R. Blanco-García INFN/LNF, Frascati (Roma), Italy H. Burkhardt, R. Kersevan, M. Lueckhof CERN, Geneva, Switzerland F. Collamati INFN-Roma1, Rome, Italy
	The MDISim toolkit is used to evaluate and characterize the beam-gas induced background in the FCC-ee Interaction Region. MDISim allows a full characterization of this beam background source with the locations where the beam-gas scattering occurs as well as the loss points, as a function of different vacuum conditions and composition, for the nominal optics and parameters. Detailed pressure distribution profiles have been obtained running coupled synchrotron radiation and molecular flow montecarlo codes, as an input to the GEANT4 calculations. The particles hitting the pipe in the IR can be tracked in the detectors with a full Geant-4 simulation. Semi-analytic estimates for the expected rates and lifetime are also performed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF085
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYGBD3	The CERN Gamma Factory Initiative: An Ultra-High Intensity Gamma Source	1780
	M.W. Krasny LPNHE, Paris, France R. Alemany-Fernández, H. Bartosik, N. Biancacci, P. Czodrowski, B. Goddard, S. Hirlaender, J.M. Jowett, R. Kersevan, M. Kowalska, M.W. Krasny, M. Lamont, D. Manglunki, A.V. Petrenko, M. Schaumann, C. Yin Vallgren, F. Zimmermann CERN, Geneva, Switzerland P.S. Antsifarov Institute of Spectroscopy, Russian Academy of Science, Troitsk, Moscow, Russia A. Apyan ANSL, Yerevan, Armenia E.G. Bessonov LPI, Moscow, Russia J. Bieron, K. Dzierzega, W. Placzek, S. Pustelny Marian Smoluchowski Institute of Physics, Jagiellonian University, Kraków, Poland D. Budker Johannes Gutenberg University Mainz, Institut für Physik, Mainz, Germany K. Cassou, I. Chaikovska, R. Chehab, K. Dupraz, A. Martens, Z.F. Zomer LAL, Orsay, France F. Castelli Università degli Studi di Milano, Milano, Italy C. Curatolo, L. Serafini Istituto Nazionale di Fisica Nucleare, Milano, Italy K. Kroeger FSU Jena, Jena, Germany V. Petrillo Universita' degli Studi di Milano & INFN, Milano, Italy V.P. Shevelko LPI RAS, Moscow, Russia T. Stöhlker HIJ, Jena, Germany G. Weber IOQ, Jena, Germany Y.K. Wu FEL/Duke University, Durham, North Carolina, USA M.S. Zolotorev LBNL, Berkeley, California, USA
	This contribution discusses the possibility of broadening the present CERN research programme making use of a novel concept of light source. The proposed, Partially Stripped Ion beam driven, light source is the backbone of the Gamma Factory (GF) initiative. It could be realized at CERN by using the infrastructure of the already existing accelerators. It could push the intensity limits of the presently operating light-sources by up to 7 orders of magnitude, reaching fluxes of 10¹⁷ photons/s in the interesting gamma-ray energy domain between 1 MeV and 400 MeV. The GF light-source cannot be replaced, in this energy domain, by a FEL source as long as the multi TeV electron beams are not available. Its intensity is beyond the reach of the Inverse Compton Scattering sources. The unprecedented-intensity, energy-tuned gamma beams, together with the gamma-beams-driven secondary beams of polarized leptons, neutrinos, neutrons and radioactive ions are the basic research tools of the proposed Gamma Factory. A broad spectrum of new opportunities, in a vast domain of uncharted fundamental and applied physics territories, could be opened by the Gamma Factory research programme.
	Slides WEYGBD3 [7.531 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEYGBD3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF034	A Supersonic Gas Jet-Based Beam Profile Monitor Using Fluorescence for HL-LHC	1891
	H.D. Zhang, A.S. Alexandrova, R. Schnuerer, C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom M. Ady, E. Barrios Diaz, N. Chritin, O.R. Jones, R. Kersevan, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness CERN, Geneva, Switzerland A.S. Alexandrova, A. Salehilashkajani, R. Schnuerer, C.P. Welsch, H.D. Zhang The University of Liverpool, Liverpool, United Kingdom P. Forck, S. Udrea GSI, Darmstadt, Germany P. Smakulski WRUT, Wroclaw, Poland
	Funding: The HL-LHC project, the Helmholtz Association under contract VH-NG-328, the EU's 7th Framework Programme under grant agreement no 215080 and the STFC Cockcroft core grant No. ST/G008248/1. The High-Luminosity Large Hadron Collider (HL-LHC) project aims to increase the machine luminosity by a factor of 10 as compared to the LHC's design value. To achieve this goal, a special type of electron lens is being developed. It uses a hollow electron beam which co-propagates with the hadron beam to act on any halo particles without perturbing the core of the beam. The overlapping of both beams should be carefully monitored. This contribution presents the design principle and detailed characteristics of a new supersonic gas jet-based beam profile monitor. In contrast to earlier monitors, it relies on fluorescence light emitted by the gas molecules in the jet following interaction with the primary hadron beams. A dedicated prototype has been designed and built at the Cockcroft Institute and is being commissioned. Details about monitor integration, achievable resolution and dynamic range will be given.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF034
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Results on the FCC-hh Beam Screen at the KIT Electron Storage Ring KARA

55

L.A. Gonzalez, V. Baglin, P. Chiggiato, C. Garion, M. Gil Costa, R. Kersevan
CERN, Geneva, Switzerland
I. Bellafont, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
S. Casalbuoni, E. Huttel
KIT, Eggenstein-Leopoldshafen, Germany

Funding: * The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding from the European Union's Horizon 2020 research and innovation programme under grant No 654305.
In the framework of the EuroCirCol collaboration* (work package 4 "Cryogenic Beam Vacuum System"), the fabrication of 3 FCC-hh beam-screen (BS) prototypes has been carried out with the aim of testing them at room temperature at the Karlsruhe Institute of Technology (KIT) 2.5 GeV electron storage ring KARA (KArlsruhe Research Accelerator). The 3 BS prototypes will be tested on a beamline installed by the collaboration, named as BEam Screen TEstbench EXperiment (BESTEX). KARA has been chosen because its synchrotron radiation (SR) spectrum, photon flux and power, match the one foreseen for the 50+50 TeV FCC-hh proton collider. Each of the 3 BS prototypes, 2 m in length, implement a different design feature: 1) baseline design (BD), with electro-deposited copper and no electron-cloud (EC) mitigation features; 2) BD with set of distributed cold-sprayed anti-EC clearing electrodes; 3) BD with laser-ablated anti-EC surface texturing. We present here the results obtained so far at BESTEX and the comparison with extensive montecarlo simulations of the expected outgassing behavior under synchrotron radiation.
The information herein only reflects the views of its authors and the European Commission is not responsible for any use that may be made of the information.

Slides MOZGBE5 [4.318 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOZGBE5

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF064

High-Energy LHC Design

269

F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
CERN, Geneva, Switzerland
J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt
JAI, Oxford, United Kingdom
A. Apyan
ANSL, Yerevan, Armenia
J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
EPFL, Lausanne, Switzerland
F. Burkart
DESY, Hamburg, Germany
Y. Cai, Y.M. Nosochkov
SLAC, Menlo Park, California, USA
G. Guillermo Cantón
CINVESTAV, Mérida, Mexico
K. Ohmi, K. Oide, D. Zhou
KEK, Ibaraki, Japan

In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF085

Beam-gas Background Characterization in the FCC-ee IR

322

M. Boscolo, O.R. Blanco-García
INFN/LNF, Frascati (Roma), Italy
H. Burkhardt, R. Kersevan, M. Lueckhof
CERN, Geneva, Switzerland
F. Collamati
INFN-Roma1, Rome, Italy

The MDISim toolkit is used to evaluate and characterize the beam-gas induced background in the FCC-ee Interaction Region. MDISim allows a full characterization of this beam background source with the locations where the beam-gas scattering occurs as well as the loss points, as a function of different vacuum conditions and composition, for the nominal optics and parameters. Detailed pressure distribution profiles have been obtained running coupled synchrotron radiation and molecular flow montecarlo codes, as an input to the GEANT4 calculations. The particles hitting the pipe in the IR can be tracked in the detectors with a full Geant-4 simulation. Semi-analytic estimates for the expected rates and lifetime are also performed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF085

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYGBD3

The CERN Gamma Factory Initiative: An Ultra-High Intensity Gamma Source

1780

M.W. Krasny
LPNHE, Paris, France
R. Alemany-Fernández, H. Bartosik, N. Biancacci, P. Czodrowski, B. Goddard, S. Hirlaender, J.M. Jowett, R. Kersevan, M. Kowalska, M.W. Krasny, M. Lamont, D. Manglunki, A.V. Petrenko, M. Schaumann, C. Yin Vallgren, F. Zimmermann
CERN, Geneva, Switzerland
P.S. Antsifarov
Institute of Spectroscopy, Russian Academy of Science, Troitsk, Moscow, Russia
A. Apyan
ANSL, Yerevan, Armenia
E.G. Bessonov
LPI, Moscow, Russia
J. Bieron, K. Dzierzega, W. Placzek, S. Pustelny
Marian Smoluchowski Institute of Physics, Jagiellonian University, Kraków, Poland
D. Budker
Johannes Gutenberg University Mainz, Institut für Physik, Mainz, Germany
K. Cassou, I. Chaikovska, R. Chehab, K. Dupraz, A. Martens, Z.F. Zomer
LAL, Orsay, France
F. Castelli
Università degli Studi di Milano, Milano, Italy
C. Curatolo, L. Serafini
Istituto Nazionale di Fisica Nucleare, Milano, Italy
K. Kroeger
FSU Jena, Jena, Germany
V. Petrillo
Universita' degli Studi di Milano & INFN, Milano, Italy
V.P. Shevelko
LPI RAS, Moscow, Russia
T. Stöhlker
HIJ, Jena, Germany
G. Weber
IOQ, Jena, Germany
Y.K. Wu
FEL/Duke University, Durham, North Carolina, USA
M.S. Zolotorev
LBNL, Berkeley, California, USA

This contribution discusses the possibility of broadening the present CERN research programme making use of a novel concept of light source. The proposed, Partially Stripped Ion beam driven, light source is the backbone of the Gamma Factory (GF) initiative. It could be realized at CERN by using the infrastructure of the already existing accelerators. It could push the intensity limits of the presently operating light-sources by up to 7 orders of magnitude, reaching fluxes of 10¹⁷ photons/s in the interesting gamma-ray energy domain between 1 MeV and 400 MeV. The GF light-source cannot be replaced, in this energy domain, by a FEL source as long as the multi TeV electron beams are not available. Its intensity is beyond the reach of the Inverse Compton Scattering sources. The unprecedented-intensity, energy-tuned gamma beams, together with the gamma-beams-driven secondary beams of polarized leptons, neutrinos, neutrons and radioactive ions are the basic research tools of the proposed Gamma Factory. A broad spectrum of new opportunities, in a vast domain of uncharted fundamental and applied physics territories, could be opened by the Gamma Factory research programme.

Slides WEYGBD3 [7.531 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEYGBD3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF034

A Supersonic Gas Jet-Based Beam Profile Monitor Using Fluorescence for HL-LHC

1891

H.D. Zhang, A.S. Alexandrova, R. Schnuerer, C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom
M. Ady, E. Barrios Diaz, N. Chritin, O.R. Jones, R. Kersevan, T. Marriott-Dodington, S. Mazzoni, A. Rossi, G. Schneider, R. Veness
CERN, Geneva, Switzerland
A.S. Alexandrova, A. Salehilashkajani, R. Schnuerer, C.P. Welsch, H.D. Zhang
The University of Liverpool, Liverpool, United Kingdom
P. Forck, S. Udrea
GSI, Darmstadt, Germany
P. Smakulski
WRUT, Wroclaw, Poland

Funding: The HL-LHC project, the Helmholtz Association under contract VH-NG-328, the EU's 7th Framework Programme under grant agreement no 215080 and the STFC Cockcroft core grant No. ST/G008248/1.
The High-Luminosity Large Hadron Collider (HL-LHC) project aims to increase the machine luminosity by a factor of 10 as compared to the LHC's design value. To achieve this goal, a special type of electron lens is being developed. It uses a hollow electron beam which co-propagates with the hadron beam to act on any halo particles without perturbing the core of the beam. The overlapping of both beams should be carefully monitored. This contribution presents the design principle and detailed characteristics of a new supersonic gas jet-based beam profile monitor. In contrast to earlier monitors, it relies on fluorescence light emitted by the gas molecules in the jet following interaction with the primary hadron beams. A dedicated prototype has been designed and built at the Cockcroft Institute and is being commissioned. Details about monitor integration, achievable resolution and dynamic range will be given.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF034

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)