IPAC2017 - List of Authors (Milanese, A.)

Paper	Title	Page
TUOCB1	Progress in the Design of Beam Optics for FCC-ee Collider Ring*	1281
	K. Oide, K. Ohmi KEK, Ibaraki, Japan M. Benedikt, H. Burkhardt, B.J. Holzer, A. Milanese, J. Wenninger, F. Zimmermann CERN, Geneva, Switzerland A.P. Blondel, M. Koratzinos DPNC, Genève, Switzerland A.V. Bogomyagkov, E.B. Levichev, D.N. Shatilov BINP SB RAS, Novosibirsk, Russia M. Boscolo INFN/LNF, Frascati (Roma), Italy
	The beam optics for the FCC-ee collider has been updated: (a) the layout is adjusted to a new footprint of FCC-hh, (b) the design around the interaction point is refined considering a number of machine-detecor interface issues, (c) the arc lattice is refined taking realistic magnet designs into account, (d) the β^* and betatron tunes are re-optimized according to recent results of the beam-beam simulations, and more. These changes make the collider design more realistic without performance degradation.
	Slides TUOCB1 [4.891 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUOCB1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA033	Conceptual Design Considerations for a 1.3 TeV Superconducting SPS (scSPS)	3323
	F. Burkart, W. Bartmann, M. Benedikt, B. Goddard, A. Milanese, J.S. Schmidt CERN, Geneva, Switzerland
	The Future Circular Collider for hadrons (FCC-hh) envisaged at CERN will require a High Energy Booster as injector. One option being studied is to reuse the 6.9 km circumference tunnel of the SPS to house a fast-ramping superconducting machine. This paper presents the conceptual design considerations for this superconducting single aperture accelerator (designated scSPS) which can be used to accelerate protons to an extraction energy of 1.3 TeV, both for FCC and for fixed target beam operation in CERN's North Area. As FCC injector this accelerator has to be used in a fast cycling mode to fulfil the FCC-hh requirements concerning filling time, which impacts directly the choice of magnet technology. The reliability and availability will also play important roles in the design, and the inclusion of a fixed target capacity also has significant implications for the lattice and layout. The cell design, magnet parameters, overall layout, design of the different insertion and performance estimates for specific applications will be presented and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA033
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA128	Preliminary Test Setup of the Metu Defocusing Beam Line, an Irradiation Test Facility in Turkey	4750
	A. Gencer, S. Akçelik, A. Avaroğlu, M.S. Aydın, G. Kılıçerkan Başlar, B. Bodur, B.M. Demirköz, U. Kılıç, E. Özipek, I. Sahin, R. Uzel, D. Veske, M. Yigitoglu Middle East Technical University, Ankara, Turkey I. Efthymiopoulos, A. Milanese CERN, Geneva, Switzerland
	Funding: Turkish Ministry of Development METU-Defocusing Beam Line (METU-DBL) Project has been started in August 2015 and aims to construct a beam line at Turkish Atomic Energy Authority Sarayköy Nuclear Education and Research Center Proton Accelerator Facility to perform Single Event Effect (SEE) tests for the first time in Turkey. The METU-DBL is 8m-long and has quadrupole magnets to enlarge the beam size and collimators to reduce the flux. When complete the METU-DBL will provide a beam that is suitable according to ESA ESCC No. 25100 Single Event Effects Test Method and Guidelines standard. The METU-DBL beam size is 15.40cm x 21.55cm and the flux will be variable between 10⁵ p/cm²/s and 10¹⁰ p/cm²/s. The METU-DBL will serve space, particle, nuclear and medical physics communities starting from 2018 with performing irradiation tests. A preliminary test setup is being constructed towards first tests in March 2017. The beam size will be 6cm x 8cm and the flux will be 1.4x10⁹ p/cm²/s for preliminary test setup. The METU-DBL project construction status for the preliminary test setup is presented in this poster.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA128
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress in the Design of Beam Optics for FCC-ee Collider Ring*

1281

K. Oide, K. Ohmi
KEK, Ibaraki, Japan
M. Benedikt, H. Burkhardt, B.J. Holzer, A. Milanese, J. Wenninger, F. Zimmermann
CERN, Geneva, Switzerland
A.P. Blondel, M. Koratzinos
DPNC, Genève, Switzerland
A.V. Bogomyagkov, E.B. Levichev, D.N. Shatilov
BINP SB RAS, Novosibirsk, Russia
M. Boscolo
INFN/LNF, Frascati (Roma), Italy

The beam optics for the FCC-ee collider has been updated: (a) the layout is adjusted to a new footprint of FCC-hh, (b) the design around the interaction point is refined considering a number of machine-detecor interface issues, (c) the arc lattice is refined taking realistic magnet designs into account, (d) the β^* and betatron tunes are re-optimized according to recent results of the beam-beam simulations, and more. These changes make the collider design more realistic without performance degradation.

Slides TUOCB1 [4.891 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUOCB1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA033

Conceptual Design Considerations for a 1.3 TeV Superconducting SPS (scSPS)

3323

F. Burkart, W. Bartmann, M. Benedikt, B. Goddard, A. Milanese, J.S. Schmidt
CERN, Geneva, Switzerland

The Future Circular Collider for hadrons (FCC-hh) envisaged at CERN will require a High Energy Booster as injector. One option being studied is to reuse the 6.9 km circumference tunnel of the SPS to house a fast-ramping superconducting machine. This paper presents the conceptual design considerations for this superconducting single aperture accelerator (designated scSPS) which can be used to accelerate protons to an extraction energy of 1.3 TeV, both for FCC and for fixed target beam operation in CERN's North Area. As FCC injector this accelerator has to be used in a fast cycling mode to fulfil the FCC-hh requirements concerning filling time, which impacts directly the choice of magnet technology. The reliability and availability will also play important roles in the design, and the inclusion of a fixed target capacity also has significant implications for the lattice and layout. The cell design, magnet parameters, overall layout, design of the different insertion and performance estimates for specific applications will be presented and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA033

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA128

Preliminary Test Setup of the Metu Defocusing Beam Line, an Irradiation Test Facility in Turkey

4750

A. Gencer, S. Akçelik, A. Avaroğlu, M.S. Aydın, G. Kılıçerkan Başlar, B. Bodur, B.M. Demirköz, U. Kılıç, E. Özipek, I. Sahin, R. Uzel, D. Veske, M. Yigitoglu
Middle East Technical University, Ankara, Turkey
I. Efthymiopoulos, A. Milanese
CERN, Geneva, Switzerland

Funding: Turkish Ministry of Development
METU-Defocusing Beam Line (METU-DBL) Project has been started in August 2015 and aims to construct a beam line at Turkish Atomic Energy Authority Sarayköy Nuclear Education and Research Center Proton Accelerator Facility to perform Single Event Effect (SEE) tests for the first time in Turkey. The METU-DBL is 8m-long and has quadrupole magnets to enlarge the beam size and collimators to reduce the flux. When complete the METU-DBL will provide a beam that is suitable according to ESA ESCC No. 25100 Single Event Effects Test Method and Guidelines standard. The METU-DBL beam size is 15.40cm x 21.55cm and the flux will be variable between 10⁵ p/cm²/s and 10¹⁰ p/cm²/s. The METU-DBL will serve space, particle, nuclear and medical physics communities starting from 2018 with performing irradiation tests. A preliminary test setup is being constructed towards first tests in March 2017. The beam size will be 6cm x 8cm and the flux will be 1.4x10⁹ p/cm²/s for preliminary test setup. The METU-DBL project construction status for the preliminary test setup is presented in this poster.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA128

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)