Author: Hiller, N.
Paper Title Page
MOPAB055 Towards Near-Field Electro-Optical Bunch Profile Monitoring in a Multi-Bunch Environment 227
 
  • P. Schönfeldt, E. Blomley, E. Bründermann, M. Caselle, S. Funkner, N. Hiller, B. Kehrer, A.-S. Müller, M.J. Nasse, G. Niehues, L. Rota, M. Schedler, M. Schuh, M. Weber
    KIT, Karlsruhe, Germany
 
  Funding: This work is funded by the BMBF contract numbers: 05K13VKA and 05K16VKA.
For electron accelerators, electro-optical methods in the near-field have been shown to be a powerful tool to detect longitudinal bunch profiles. In 2013, we demonstrated for the first time, electro-optical bunch profile measurements in a storage ring at the accelerator test facility and synchrotron light source ANKA at the Karlsruhe Institute of Technology (KIT). To study possible bunch-bunch interactions and its effects on the longitudinal dynamics, these measurements need to be performed in a multi-bunch environment. Up to now, due to long-ranging wake-fields the electro-optical monitoring was limited to single-bunch operation. Here, we present our new in-vacuum setup to overcome this limitation. First measurements show reduced wake-fields in particular around 2 ns, where the subsequent bunch can occur in a multi-bunch environment at ANKA.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB055  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOOCB1 Time-Resolved Energy Spread Studies at the ANKA Storage Ring 53
 
  • B. Kehrer, E. Blomley, M. Brosi, E. Bründermann, A.-S. Müller, M.J. Nasse, M. Schedler, M. Schuh, M. Schwarz, P. Schönfeldt, N.J. Smale, J.L. Steinmann
    KIT, Karlsruhe, Germany
  • N. Hiller
    PSI, Villigen PSI, Switzerland
  • P. Schütze
    DESY, Hamburg, Germany
 
  Funding: This work has been supported by the Initiative and Networking Fund the Helmholtz Association under contract number VH-NG-320 and the BMBF under contract numbers 05K13VKA and 05K16VKA.
Recently, a new setup for measuring the beam energy spread has been commissioned at the ANKA storage ring at the Karlsruhe Institute of Technology. This setup is based on a fast-gated intensified camera and detects the horizontal profiles of individual bunches in a multi-bunch environment on a single-turn base. As the radiation source point is located in a dispersive section of the storage ring, this allows time-resolved studies of the energy spread. These studies are of particular interest in the framework of short-bunch beam dynamics and the characterization of instabilities. The system is fully synchronized to other beam diagnostics devices allocated in various places along the storage ring, such as the single-shot electro-optical spectral decoding setup or the turn-by-turn terahertz detection systems. Here we discuss the results of the synchronous measurements with the various systems with special emphasis on the energy spread studies.
 
slides icon Slides MOOCB1 [6.514 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOOCB1  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPVA020 Dual-Grating Dielectric Accelerators Driven by A Pulse-Front-Tilted Laser 3299
 
  • Y. Wei, C.P. Welsch
    The University of Liverpool, Liverpool, United Kingdom
  • M.M. Dehler, E. Ferrari, N. Hiller, R. Ischebeck
    PSI, Villigen PSI, Switzerland
  • J.D.A. Smith
    TXUK, Warrington, United Kingdom
  • C.P. Welsch
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • G.X. Xia
    UMAN, Manchester, United Kingdom
 
  Dual-grating Dielectric Laser-driven Accelerators (DLAs) are considered to be one of the most promising technologies to miniaturize future particle accelerators. Accelerating gradients in the GV/m range seem accessible and 690 MV/m has been demonstrated in fused silica structures. However, the increase in beam energy is limited by the short interaction length between the laser pulses and the electron bunch. In this contribution, a pulse-front-tilt operation for a laser beam is studied to extend the interaction length, resulting in a greater energy gain for a dual-grating DLA. The VSIM code is used to compare this new scheme with the commonly used approach of a normally incident laser beam and advantages are summarized.
[1]T. Plettner, et al., Phys. Rev. ST Accel. Beams 9, 111301 (2006)
[2]K. P. Wootton, et al., Opt. Lett., 41, 2696 (2016).
[3]E. A. Peralta, et al., Nature 503, 91 (2013)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA020  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)