IPAC2017 - List of Authors (Gao, P.H.)

Paper	Title	Page
TUPIK068	Parameters Calibration and Compensation-Rematch of Failure Cavities in CADS Injector	1852
SUSPSIK085	use link to see paper's listing under its alternate paper code
	Y.Z. Jia, W.L. Chen, W.P. Dou, P.H. Gao, H. Jia, S.H. Liu, Y.S. Qin, C. Wang, W.S. Wang, Z.J. Wang IMP/CAS, Lanzhou, People's Republic of China
	Now when a failure on the China Accelerator Driven System (CADS) is detected, the beam will be stopped by the machine protection system (MPS) immediately. But because of the demand of the beam trip (more than 5 min) rate which should be less than 50 times per year [1], it is important to avoid cutting beam down or recover the beam in a short time. The compensation and rematch is of great importance. If the failure is on a cavity, the other cavities should retune to compensate the beam energy, position and phase in order to recover the beam in short time depending on the time of online calculation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK065	Reliability Anlysis of 20kw Solid-State Amplifiers for Ciads	4245
	P.H. Gao IMP/CAS, Lanzhou, People's Republic of China
	CIADS will apply the solid-state amplifier. 20KW solid-state amplifiers are the basis of RF systems. This talk model 20KW solid-state amplifiers with reliability block diagram(RBD). Through simulation, we find that the reliability function relative to redundancy approximates logarithm, but cost is linear growth. There is an optimal solution between redundancy and cost.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK065
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPIK068

Parameters Calibration and Compensation-Rematch of Failure Cavities in CADS Injector

1852

SUSPSIK085

use link to see paper's listing under its alternate paper code

Y.Z. Jia, W.L. Chen, W.P. Dou, P.H. Gao, H. Jia, S.H. Liu, Y.S. Qin, C. Wang, W.S. Wang, Z.J. Wang
IMP/CAS, Lanzhou, People's Republic of China

Now when a failure on the China Accelerator Driven System (CADS) is detected, the beam will be stopped by the machine protection system (MPS) immediately. But because of the demand of the beam trip (more than 5 min) rate which should be less than 50 times per year [1], it is important to avoid cutting beam down or recover the beam in a short time. The compensation and rematch is of great importance. If the failure is on a cavity, the other cavities should retune to compensate the beam energy, position and phase in order to recover the beam in short time depending on the time of online calculation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK065

Reliability Anlysis of 20kw Solid-State Amplifiers for Ciads

4245

P.H. Gao
IMP/CAS, Lanzhou, People's Republic of China

CIADS will apply the solid-state amplifier. 20KW solid-state amplifiers are the basis of RF systems. This talk model 20KW solid-state amplifiers with reliability block diagram(RBD). Through simulation, we find that the reliability function relative to redundancy approximates logarithm, but cost is linear growth. There is an optimal solution between redundancy and cost.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK065

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)