IPAC2017 - List of Authors (Corlett, J.N.)

Paper	Title	Page
TUPAB122	Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments	1602
	A.J. DeMello, D. Arbelaez, D. Bianculli, A.P. Brown, J.N. Corlett, J.R. Dougherty, D.E. Humphries, J.-Y. Jung, M. Leitner, S. Marks, K.A. McCombs, K.L. Ray, D.A. Sadlier, D. Schlueter, E.J. Wallén LBNL, Berkeley, California, USA
	Funding: Work supported by the Director, O'ce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The Linear Coherent Light Source II (LCLS-II) project, an upgrade to the free-electron laser facility at SLAC, is replacing the undulator system from a fixed gap to a variable gap system to enable tuning of the photon energy range. The LCLS-II project will include a soft x-ray (SXR) beam line and a hard x-ray (HXR) beam line. The SXR undulators are conventional vertical-gap horizontally-polarizing devices while the HXR undulators are novel horizontal-gap vertically-polarizing devices. This paper describes in detail the development of the SXR mechanical support structure and drive system. The effort has included extensive analysis of the various components to ensure that the undulators will perform within the design specifications. Engineering simulations undertaken and experiments performed to validate the computer modeling are presented together with measurement results from prototype and pre-production undulators.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB122
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB123	Hard X-Ray and Soft X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project	1605
	M. Leitner, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, M. Hoyt, D.E. Humphries, D. Jacobs, C. Joiner, J.-Y. Jung, D. Leitner, S. Marks, K.A. McCombs, D.V. Munson, K.L. Ray, D.A. Sadlier, J.J. Savino, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund LBNL, Berkeley, California, USA C.J. Andrews, D.E. Bruch, A.L. Callen, G. Janša, S. Jansson, K.R. Lauer, Yu.I. Levashov, D.S. Martinez-Galarce, B.D. McKee, H.-D. Nuhn, Ž. Oven, M. Rowen, Z.R. Wolf SLAC, Menlo Park, California, USA
	Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Stanford Linear Accelerator Laboratory is currently constructing the Linear Coherent Light Source II (LCLS-II), a free-electron laser (FEL) which will deliver x-rays at an energy range between 0.2 keV and 5 keV at high repetition rate of up to ~1 MHz using a new 4 GeV superconducting RF linac, and at and an energy range between 1 keV and 25 keV when driven by an existing copper linac at up to 120 Hz repetition rate. To cover the full photon energy range, LCLS-II includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator (SXR) line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV plus a hard x-ray undulator (HXR) line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. Lawrence Berkeley National Laboratory is responsible for fabricating the 53 undulator segments. This paper summarizes the main parameters and design attributes for both LCLS-II undulator segment types.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB123
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB124	Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators	1609
	K.L. Ray, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, D.E. Humphries, J.-Y. Jung, D. Leitner, M. Leitner, S. Marks, K.A. McCombs, D.V. Munson, D.A. Sadlier, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund LBNL, Berkeley, California, USA D.E. Bruch, A.L. Callen, G. Janša, D.S. Martinez-Galarce, H.-D. Nuhn, E. Ortiz, Ž. Oven, M. Rowen, Z.R. Wolf SLAC, Menlo Park, California, USA
	Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. A new free electron laser being built at SLAC National Accelerator Laboratory, the Linear Coherent Light Source II (LCLS-II), will use 21 soft x-ray undulators (SXR) and 32 hard x-ray undulators (HGVPU). Lawrence Berkeley National Laboratory (LBNL) is responsible for the design and manufacturing of all variable-gap, hybrid permanent-magnet undulators. The physics requirements for the undulators specify a longitudinal pole misalignment maximum rms error of 25 μm and a vertical pole misalignment maximum error of 50 μm. In addition, magnet positioning critically influences the gap-dependent field properties due to saturation effects at the smallest operational gaps. This paper discusses the manufacturing and QA methods developed to carefully control the longitudinal and vertical pole and magnet positions during undulator production. Inspection results are discussed based on data gathered during construction of a prototype as well as pre-production soft x-ray undulator.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB124
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB125	Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project	1612
	E.J. Wallén, D. Arbelaez, J.N. Corlett, L. Fajrado, H.W. Kim, M. Leitner, S. Marks, D. Schlueter, A. Zikmund LBNL, Berkeley, California, USA Yu.I. Levashov, H.-D. Nuhn, Z.R. Wolf SLAC, Menlo Park, California, USA
	Funding: Work supported by the Director, O'ce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Stanford Linear Accelerator Laboratory is currently constructing the Linear Coherent Light Source II (LCLS-II), a FEL which will deliver x-rays at an energy range 0.2-5 keV at high repetition rate of up to 1 MHz using a new 4 GeV superconducting linac, and at an energy range 1-25 keV when using the existing copper linac at up to 120 Hz. To cover the full photon energy range, LCLS-II includes two variable-gap, hybrid-type permanent magnet undulator lines: A soft x-ray undulator (SXR) line with 21 undulator segments for the photon energy range 0.2-1.3 keV plus a hard x-ray undulator (HXR) line with 32 undulator segments designed for a photon energy range from 1-5 keV when using the superconducting linac. The HXR line is also designed to support 25 keV and higher photon energies when using the existing copper linac. Lawrence Berkeley National Laboratory (LBNL) is responsible for fabricating the undulators and tuning 23 of the HXR undulators. This paper summarizes the magnetic field measurements carried out on the pre-production undulators and describes the plans at LBNL for the magnetic measurements on the HXR undulators in series production.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB125
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB099	Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun	2815
	J.A. Doyle, J.N. Corlett, M.J. Johnson, R. Kraft, T.D. Kramasz, D. Leitner, S.P. Virostek LBNL, Berkeley, California, USA
	Funding: * This work is supported by the Office of Science, United States Department of Energy under DOE contract DE-AC02-05CH11231. The Linear Coherent Light Source-II (LCLS-II), a new free electron laser currently under construction at SLAC, requires a high repetition rate, high brightness, continuous wave electron source. Lawrence Berkeley National Laboratory (LBNL) has developed a design for a normal conducting VHF gun in response to that need and is responsible for its production and that of the associated beamline, with much of the fabrication done in-house. The 186 MHz copper cavity dissipates approximately 90 kW of RF power while maintaining a vacuum pressure on the order of 10^-10 Torr. The gun is a critical component that requires a very high level of operational reliability to ensure uninterrupted availability for future system users. A quality assurance system to instruct manufacturing and change control is vital to ensure production of a gun that reliably meets physics requirements over an extended period of usage. This paper describes the QA processes developed for fabrication and assembly of the Injector Source electron gun along with results and lessons learned from their current implementation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB099
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Engineering Optimization of The Support Structure and Drive System for the LCLS-II Soft X-Ray Undulator Segments

1602

A.J. DeMello, D. Arbelaez, D. Bianculli, A.P. Brown, J.N. Corlett, J.R. Dougherty, D.E. Humphries, J.-Y. Jung, M. Leitner, S. Marks, K.A. McCombs, K.L. Ray, D.A. Sadlier, D. Schlueter, E.J. Wallén
LBNL, Berkeley, California, USA

Funding: Work supported by the Director, O'ce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
The Linear Coherent Light Source II (LCLS-II) project, an upgrade to the free-electron laser facility at SLAC, is replacing the undulator system from a fixed gap to a variable gap system to enable tuning of the photon energy range. The LCLS-II project will include a soft x-ray (SXR) beam line and a hard x-ray (HXR) beam line. The SXR undulators are conventional vertical-gap horizontally-polarizing devices while the HXR undulators are novel horizontal-gap vertically-polarizing devices. This paper describes in detail the development of the SXR mechanical support structure and drive system. The effort has included extensive analysis of the various components to ensure that the undulators will perform within the design specifications. Engineering simulations undertaken and experiments performed to validate the computer modeling are presented together with measurement results from prototype and pre-production undulators.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB122

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB123

Hard X-Ray and Soft X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project

1605

M. Leitner, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, M. Hoyt, D.E. Humphries, D. Jacobs, C. Joiner, J.-Y. Jung, D. Leitner, S. Marks, K.A. McCombs, D.V. Munson, K.L. Ray, D.A. Sadlier, J.J. Savino, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund
LBNL, Berkeley, California, USA
C.J. Andrews, D.E. Bruch, A.L. Callen, G. Janša, S. Jansson, K.R. Lauer, Yu.I. Levashov, D.S. Martinez-Galarce, B.D. McKee, H.-D. Nuhn, Ž. Oven, M. Rowen, Z.R. Wolf
SLAC, Menlo Park, California, USA

Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
Stanford Linear Accelerator Laboratory is currently constructing the Linear Coherent Light Source II (LCLS-II), a free-electron laser (FEL) which will deliver x-rays at an energy range between 0.2 keV and 5 keV at high repetition rate of up to ~1 MHz using a new 4 GeV superconducting RF linac, and at and an energy range between 1 keV and 25 keV when driven by an existing copper linac at up to 120 Hz repetition rate. To cover the full photon energy range, LCLS-II includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator (SXR) line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV plus a hard x-ray undulator (HXR) line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. Lawrence Berkeley National Laboratory is responsible for fabricating the 53 undulator segments. This paper summarizes the main parameters and design attributes for both LCLS-II undulator segment types.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB123

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB124

Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators

1609

K.L. Ray, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, D.E. Humphries, J.-Y. Jung, D. Leitner, M. Leitner, S. Marks, K.A. McCombs, D.V. Munson, D.A. Sadlier, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund
LBNL, Berkeley, California, USA
D.E. Bruch, A.L. Callen, G. Janša, D.S. Martinez-Galarce, H.-D. Nuhn, E. Ortiz, Ž. Oven, M. Rowen, Z.R. Wolf
SLAC, Menlo Park, California, USA

Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
A new free electron laser being built at SLAC National Accelerator Laboratory, the Linear Coherent Light Source II (LCLS-II), will use 21 soft x-ray undulators (SXR) and 32 hard x-ray undulators (HGVPU). Lawrence Berkeley National Laboratory (LBNL) is responsible for the design and manufacturing of all variable-gap, hybrid permanent-magnet undulators. The physics requirements for the undulators specify a longitudinal pole misalignment maximum rms error of 25 μm and a vertical pole misalignment maximum error of 50 μm. In addition, magnet positioning critically influences the gap-dependent field properties due to saturation effects at the smallest operational gaps. This paper discusses the manufacturing and QA methods developed to carefully control the longitudinal and vertical pole and magnet positions during undulator production. Inspection results are discussed based on data gathered during construction of a prototype as well as pre-production soft x-ray undulator.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB124

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB125

Magnetic Field Measurements at LBNL on Soft X-Ray and Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project

1612

E.J. Wallén, D. Arbelaez, J.N. Corlett, L. Fajrado, H.W. Kim, M. Leitner, S. Marks, D. Schlueter, A. Zikmund
LBNL, Berkeley, California, USA
Yu.I. Levashov, H.-D. Nuhn, Z.R. Wolf
SLAC, Menlo Park, California, USA

Funding: Work supported by the Director, O'ce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
Stanford Linear Accelerator Laboratory is currently constructing the Linear Coherent Light Source II (LCLS-II), a FEL which will deliver x-rays at an energy range 0.2-5 keV at high repetition rate of up to 1 MHz using a new 4 GeV superconducting linac, and at an energy range 1-25 keV when using the existing copper linac at up to 120 Hz. To cover the full photon energy range, LCLS-II includes two variable-gap, hybrid-type permanent magnet undulator lines: A soft x-ray undulator (SXR) line with 21 undulator segments for the photon energy range 0.2-1.3 keV plus a hard x-ray undulator (HXR) line with 32 undulator segments designed for a photon energy range from 1-5 keV when using the superconducting linac. The HXR line is also designed to support 25 keV and higher photon energies when using the existing copper linac. Lawrence Berkeley National Laboratory (LBNL) is responsible for fabricating the undulators and tuning 23 of the HXR undulators. This paper summarizes the magnetic field measurements carried out on the pre-production undulators and describes the plans at LBNL for the magnetic measurements on the HXR undulators in series production.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB125

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB099

Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun

2815

J.A. Doyle, J.N. Corlett, M.J. Johnson, R. Kraft, T.D. Kramasz, D. Leitner, S.P. Virostek
LBNL, Berkeley, California, USA

Funding: * This work is supported by the Office of Science, United States Department of Energy under DOE contract DE-AC02-05CH11231.
The Linear Coherent Light Source-II (LCLS-II), a new free electron laser currently under construction at SLAC, requires a high repetition rate, high brightness, continuous wave electron source. Lawrence Berkeley National Laboratory (LBNL) has developed a design for a normal conducting VHF gun in response to that need and is responsible for its production and that of the associated beamline, with much of the fabrication done in-house. The 186 MHz copper cavity dissipates approximately 90 kW of RF power while maintaining a vacuum pressure on the order of 10^-10 Torr. The gun is a critical component that requires a very high level of operational reliability to ensure uninterrupted availability for future system users. A quality assurance system to instruct manufacturing and change control is vital to ensure production of a gun that reliably meets physics requirements over an extended period of usage. This paper describes the QA processes developed for fabrication and assembly of the Injector Source electron gun along with results and lessons learned from their current implementation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB099

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)