Author: Callen, A.L.
Paper Title Page
TUPAB123 Hard X-Ray and Soft X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project 1605
 
  • M. Leitner, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, M. Hoyt, D.E. Humphries, D. Jacobs, C. Joiner, J.-Y. Jung, D. Leitner, S. Marks, K.A. McCombs, D.V. Munson, K.L. Ray, D.A. Sadlier, J.J. Savino, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund
    LBNL, Berkeley, California, USA
  • C.J. Andrews, D.E. Bruch, A.L. Callen, G. Janša, S. Jansson, K.R. Lauer, Yu.I. Levashov, D.S. Martinez-Galarce, B.D. McKee, H.-D. Nuhn, Ž. Oven, M. Rowen, Z.R. Wolf
    SLAC, Menlo Park, California, USA
 
  Funding: Work supported by the Director Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
Stanford Linear Accelerator Laboratory is currently constructing the Linear Coherent Light Source II (LCLS-II), a free-electron laser (FEL) which will deliver x-rays at an energy range between 0.2 keV and 5 keV at high repetition rate of up to ~1 MHz using a new 4 GeV superconducting RF linac, and at and an energy range between 1 keV and 25 keV when driven by an existing copper linac at up to 120 Hz repetition rate. To cover the full photon energy range, LCLS-II includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator (SXR) line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV plus a hard x-ray undulator (HXR) line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. Lawrence Berkeley National Laboratory is responsible for fabricating the 53 undulator segments. This paper summarizes the main parameters and design attributes for both LCLS-II undulator segment types.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB123  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB124 Development of the Manufacturing and QA Processes for the Magnetic Modules of the LCLS-II Soft X-Ray Undulators 1609
 
  • K.L. Ray, D. Arbelaez, A.J. Band, D. Bianculli, A.P. Brown, J.N. Corlett, A.J. DeMello, J.R. Dougherty, L. Garcia Fajardo, K. Hanzel, D.E. Humphries, J.-Y. Jung, D. Leitner, M. Leitner, S. Marks, K.A. McCombs, D.V. Munson, D.A. Sadlier, D. Schlueter, E.J. Wallén, V. Waring, A. Zikmund
    LBNL, Berkeley, California, USA
  • D.E. Bruch, A.L. Callen, G. Janša, D.S. Martinez-Galarce, H.-D. Nuhn, E. Ortiz, Ž. Oven, M. Rowen, Z.R. Wolf
    SLAC, Menlo Park, California, USA
 
  Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
A new free electron laser being built at SLAC National Accelerator Laboratory, the Linear Coherent Light Source II (LCLS-II), will use 21 soft x-ray undulators (SXR) and 32 hard x-ray undulators (HGVPU). Lawrence Berkeley National Laboratory (LBNL) is responsible for the design and manufacturing of all variable-gap, hybrid permanent-magnet undulators. The physics requirements for the undulators specify a longitudinal pole misalignment maximum rms error of 25 μm and a vertical pole misalignment maximum error of 50 μm. In addition, magnet positioning critically influences the gap-dependent field properties due to saturation effects at the smallest operational gaps. This paper discusses the manufacturing and QA methods developed to carefully control the longitudinal and vertical pole and magnet positions during undulator production. Inspection results are discussed based on data gathered during construction of a prototype as well as pre-production soft x-ray undulator.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB124  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)