| Paper |
Title |
Page |
| MOPMB058 |
Bunch Arrival Time Monitor Test at PAL-XFEL ITF |
223 |
| |
- J.H. Hong, J.H. Han, C. Kim, H. Yang
PAL, Pohang, Kyungbuk, Republic of Korea
|
|
| |
Femtosecond resolution electron bunch arrival time monitor (BAM) will be required for the beam-based RF phase feedback during PAL-XFEL operation. Two S-band cavity-type BAMs were manufactured for the test at the PAL-XFEL injector test facility (ITF). The resonance frequencies of the cavities are 2856 MHz and 2826.25 MHz. Electron beam induced signal from the cavities was digitized using a low level RF (LLRF) module. In this paper, the resolution of these cavities are analyzed and a possible improvement for better resolution are discussed.
|
|
| DOI • |
reference for this paper
※ DOI:10.18429/JACoW-IPAC2016-MOPMB058
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| WEYB01 |
Diagnostic Systems of the PAL-XFEL |
2091 |
| |
- C. Kim, S.Y. Baek, H. J. Choi, J.H. Hong, H.-S. Kang, G. Kim, J.H. Kim, I.S. Ko, S.J. Lee, G. Mun, B.G. Oh, B.R. Park, D.C. Shin, H. Yang
PAL, Pohang, Kyungbuk, Republic of Korea
|
|
| |
The Pohang Accelerator Laboratory (PAL) started an x-ray free electron laser project (PAL-XFEL) in 2011. The construction was finished at the end of 2015 and the commissioning is planned from the beginning of 2016. In the PAL-XFEL, an electron beam with 200 pC will be generated from a photocathode RF gun and will be accelerated to 10 GeV by using a linear accelerator. The electron beam will pass through undulator section to produce hard X-ray radiation. For the successful commissioning and beam operation, various kinds of instruments were prepared.
|
|
|
Slides WEYB01 [11.770 MB]
|
|
| DOI • |
reference for this paper
※ DOI:10.18429/JACoW-IPAC2016-WEYB01
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |