| Paper | Title | Page |
|---|---|---|
| TUOCB03 | Magnet Development for SPring-8 Upgrade | 1093 |
|
||
|
One of the features for newly designed magnets for the SPring-8 major upgrade plan* is permanent magnet based dipole magnets for substantial energy saving. The new dipole magnets have been designed to be equipped with (i) a field variable function by controlling magnetic flux into a beam axis, (ii) a nose structure on iron poles for smooth B-field transition in the longitudinal gradient field, and (iii) a nearly zero temperature coefficient of magnet circuit with the help of a shunt alloy**. Demagnetization due to radiation is also a critical issue. At SPring-8, demagnetization process has been intensively studied, and the effect has been considered in the design of dipole magnets. Although electromagnet based multi-pole magnets are rather conventional technologies, yet new magnets need to be designed to fit in the next generation high packing factor lattice with as reasonably lower energy consumption as possible. Magnet alignment will be a key development as well; in order to secure adequate dynamic apertures, magnets ought to be aligned within tens of microns. Current design and recent progress in the developments of magnets and alignment schemes will be presented.
* H. Tanaka et al., SPring-8 Upgrade Project, in the abstracts. ** T. Taniuchi et al., Proc. of IPAC2015, WEPMA050. |
||
|
Slides TUOCB03 [4.014 MB] | |
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUOCB03 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOW019 | SPring-8 Upgrade Project | 2867 |
|
||
| Plans are underway for the upgrade of the SPring-8 facility, targeting completion in the early 2020's. Sustainability is a key guiding principle for the fourth-generation X-ray source - a beam emittance of around 100 pm.rad is pursued simultaneously with substantial energy-saving. The three key features of the design are (i) to replace the main dipole electric magnets with permanent magnets, (ii) to reduce the electron beam energy from 8 to 6 GeV, and (iii) to use the SACLA linac as an injector. Lowering the beam energy leads to reduction of (a) beam emittance, (b) magnetic fields, (c) the lengths of ID straight sections to maintain larger spaces for the magnets, and (d) the RF power consumption. Timeshare use of the SACLA linac enables beam injection to the upgraded ring with a low-emittance and short-pulsed beam as well as a reduction of injector power consumption by stopping the present injector consisting of a 1-GeV linac and a booster synchrotron. The outline of the upgrade plan will be reported with the current status of R&D started in 2015. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW019 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |