Author: Wang, B.C.
Paper Title Page
TUPMB010 Magnetic Center Position and Tilt Angle of Quadrupole by Vibration Wire Method 1127
 
  • L. Wu, X. Guan, X.W. Wang, S.X. Zheng
    TUB, Beijing, People's Republic of China
  • B.C. Wang
    NINT, Xi'an, People's Republic of China
  • G. Xialing
    CIAE, Beijing, People's Republic of China
 
  Vibrating wire method and device are described to locate the magnetic center of a Quadrupole theoretically and experimentally. With rotating 180 degrees method, it is convenience to measure the position magnetic center from mechanical center. Tilt angle can also be measured because tilt of magnetic axis will cause the difference of measured magnetic center in different harmonic driving current frequency. Errors analysis shows that tilt of Quadrupole will cause the main error and improved device is described to adjust and measure the tilt angle to fix the errors caused by tilt.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB010  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMW014 Design of the 7MeV Linac Injector for the 200MeV Synchrotron of the Xi'an Proton Application Facility 426
 
  • Q.Z. Xing, C. Cheng, C.T. Du, L. Du, T. Du, X. Guan, H. Jiang, C.-X. Tang, R. Tang, D. Wang, X.W. Wang, L. Wu, H.Y. Zhang, Q.Z. Zhang, S.X. Zheng
    TUB, Beijing, People's Republic of China
  • W.Q. Guan, Y. He, J. Li
    NUCTECH, Beijing, People's Republic of China
  • B.C. Wang, Z.M. Wang, W.L. Yang, Y. Yang, C. Zhao
    State Key Laboratory of Intense Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Shannxi, People's Republic of China
 
  We present, in this paper, the design result of the 7 MeV linac which will inject the negative hydrogen ion beam to the downsteam synchrotron of the Xi‘an Proton Application Facility (XiPAF). This newly designed facility will be located in Xi'an city and provide the proton beam with the maximum energy of 230 MeV for the research of the single event effect. The 7 MeV linac injector is composed of the 50 keV negative hydrogen ion source, Low Energy Beam Transport line (LEBT), 3 MeV four-vane-type Radio Frequency Quadrupole (RFQ) accelerator, 7 MeV Alvarez-type Drift Tube Linac (DTL), and the corresponding RF power source system. The output beam of the linac injector is designed with the peak current of 5 mA, maximum repetition frequency of 0.5 Hz, beam pulse width of 10~40 μs and RMS normalized emittance of 0.24 π mm·mard.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW014  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPMB009 Vibrating Wire Measurements for the XiPAF Permanent Magnet Quadrupoles 1124
SUPSS102   use link to see paper's listing under its alternate paper code  
 
  • B.C. Wang, M.T. Qiu, Z.M. Wang
    State Key Laboratory of Intense Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Shannxi, People's Republic of China
  • C.T. Du, X.W. Wang, L. Wu, Q.Z. Xing, S.X. Zheng
    TUB, Beijing, People's Republic of China
 
  Vibrating wire technique is a promising measure-ment method for small-aperture Permanent Magnet Quadrupoles (PMQs) in linear accelerators and scan-ning nuclear microprobes. In this paper, we describe the improved vibrating wire setup for measuring an individual PMQ with the minimum aperture of several millimeters. This setup is aiming at measuring the magnetic center. The advantage of this setup is that any mechanical measurement on the wire, which may be the main error source, is avoided. Experiments of the 20 mm-aperture Halbach-type PMQs for Xi'an Proton Application Facility (XiPAF) DTL has been carried out. The research results of the magnetic center measurements show a precision of about 10 μm and robustness against the background magnetic field. Results of the magnetic center and field multipoles measurements agree with the ones obtained from the rotating coil.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB009  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)