IPAC2016 - List of Authors (Seimiya, Y.)

Paper	Title	Page
TUOBA01	Beam Commissioning of SuperKEKB	1019
	Y. Funakoshi, T. Abe, T. Adachi, K. Akai, Y. Arimoto, K. Egawa, Y. Enomoto, J.W. Flanagan, H. Fukuma, K. Furukawa, N. Iida, H. Iinuma, H. Ikeda, T. Ishibashi, M. Iwasaki, T. Kageyama, H. Kaji, T. Kamitani, T. Kawamoto, S. Kazama, M. Kikuchi, T. Kobayashi, K. Kodama, H. Koiso, M. Masuzawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, S. Nakamura, T.T. Nakamura, H. Nakayama, T. Natsui, M. Nishiwaki, K. Ohmi, Y. Ohnishi, T. Oki, S. Sasaki, M. Satoh, Y. Seimiya, K. Shibata, M. Suetake, Y. Suetsugu, H. Sugimoto, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, S. Uehara, S. Uno, X. Wang, K. Watanabe, Y. Yano, S.I. Yoshimoto, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong KEK, Ibaraki, Japan D. El Khechen LAL, Orsay, France
	In this report, we describe the machine operation in the first 3 months of the Phase 1 commissioning of SuperKEKB. The beam commissioning is smoothly going on. Vacuum scrubbing, the optics corrections and others are described.
	Slides TUOBA01 [9.346 MB]
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUOBA01
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW006	Six-dimensional Phase-space Rotation and its Applications	1754
	M. Kuriki, K. Negishi HU/AdSM, Higashi-Hiroshima, Japan H. Hayano, R. Kato, K. Ohmi, M. Satoh, Y. Seimiya, J. Urakawa KEK, Ibaraki, Japan S. Kashiwagi Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
	Funding: This work is partly supported by Grant-in-Aid for Scientific Research by MEXT, Japan (KAKENHI) 25390126. Recent progress on the accelerator science requires optimized phase space distributions of the beam for each applications. A classical approach to satisfy the requirements is minimizing the beam emittance with a bunch charge as much as possible. This classical approach is not efficient and not compatible to the beam dynamics nature. 6D phase-space rotation, e.g. z-x and x-y, gives a way to optimize the phase space distribution for various applications. In this article, we discus possible applications of the 6D phase space rotation. The x-y rotation generates the high aspect ratio beam for linear colliders directly without DR (Damping Ring). Combination of bunch clipping with a mechanical slit and x-z rotation can generate micro-bunch structure which is applicable for FEL enhancement and drive beam for dielectric acceleration. We present our theoretical and simulation study on these applications.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW036	Recent Developments and Operational Status of the Compact ERL at KEK	1835
	T. Obina, M. Adachi, S. Adachi, T. Akagi, M. Akemoto, D.A. Arakawa, S. Araki, S. Asaoka, M. Egi, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, X.J. Jin, E. Kako, Y. Kamiya, H. Katagiri, R. Kato, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondo, T. Konomi, A. Kosuge, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, N. Nakamura, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, Y. Seimiya, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, N. Terunuma, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, J. Urakawa, K. Watanabe, M. Yamamoto, N. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida KEK, Ibaraki, Japan R. Hajima, M. Mori, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma QST, Tokai, Japan M. Kuriki Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
	The Compact Energy Recovery Linac (cERL) at KEK is a test accelerator in order to develop key components to realize remarkable ERL performance as a future light source. After the beam commissioning in December 2013, the legal current limit has been increased step-by-step like 1 uA, 10 uA, and 100 uA. Survey for the source of beam losses has been conducted in each step, and the study on beam dynamics and tuning has also been carried out. As a next step, 1 mA operation is scheduled in February 2016. In parallel to the increase in beam current, a laser Compton scattering (LCS) system which can provide high-flux X-ray to a beamline has been successfully commissioned. We report recent progress in various kinds of beam tuning: improvement of electron gun performance, high bunch charge operation, mitigation of beam losses, LCS optics tuning and bunch compression for THz radiation.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW036
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR040	Emittance Growth by Misalignments and Jitters in SuperKEKB Injector Linac	3871
	Y. Seimiya, Y. Enomoto, K. Furukawa, T. Higo, T. Kamitani, F. Miyahara, Y. Ohnishi, M. Satoh, T. Suwada, M. Tanaka KEK, Ibaraki, Japan
	Funding: This work was partly supported by JSPS KAKENHI Grant Number 16K17545. SuperKEKB injector linac have to transport high-charged beam with low emittance to SuperKEKB ring for high luminosity, 8¥times10³⁵. For the low emittance, photocathode RF gun was adopted as electron source. One of the main reason of the beam emittance blow-up electron linac is generally induced by wakefield in acceleration cavities. A charged beam with a offset from a center of a cavity is affected by the wakefield depending on the offset size in the acceleration cavity and the beam emittance is increased. This emittance blow-up can be eliminated by appropriate steering magnet control so as to cancel the wake effect in the acceleration cavity. We perform particle tracking simulation with some misalignments and beam jitter. Emittance growth by the misalignments and the beam jitter is evaluated in this report.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOW005	A Study of CsK2Sb Multi-alkali Photocathode by Ultraviolet Photoelectron Spectroscopy at UVSOR	3934
SUPSS022	use link to see paper's listing under its alternate paper code
	M. Urano, M. Kuriki, K. Negishi HU/AdSM, Higashi-Hiroshima, Japan T. Konomi, Y. Seimiya, N. Yamamoto KEK, Ibaraki, Japan
	Photocathode is one of the most important components in the next-generation accelerators, especially based on linear accelerators. Photocathode performance depends not only on electronic state in its bulk material but also on the surface condition. CsK2Sb multi-alkali photocathode is a candidate for the high brightness electron source because of its high quantum efficiency by green laser and its high robustness. We have carried out an UPS (UV Photoelectron Spectroscopy) experiment at UVSOR facility, synchrotron radiation light source in Aichi Japan. We have compared the UPS spectra among several samples, each one has a different quantum efficiency, and try to find physics which decide photocathode's performance. In this case, we focused some characters correlated to the quantum efficiency. I'm going to present a result of this analysis.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOW006	A Study of Operational Lifetime of CsK2Sb Photo-cathode	3938
	A. Yokota, R. Kaku, M. Kuriki, K. Negishi, M. Urano HU/AdSM, Higashi-Hiroshima, Japan Y. Seimiya KEK, Ibaraki, Japan
	A high performance electron beam generated with a laser photo-cathode is one of the most important pieces in the advanced accelerator. Because the CsK2Sb photo-cathode is robust with more than 10 % quantum efficiency (QE) by green laser (532nm), it is considered to be the best candidates of the cathode for Energy Recovery Lin-ac (ERL) and Free Electron Laser (FEL) requiring a high brightness beam. We developed a system to evaporate the cathode as a thin film in vacuum to study the cathode performance. The cathode operational lifetime regarding not only on time, but also extracted charge density was studied. We found the lifetime is long enough for practical use in an accelerator.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY027	Commissioning Status of SuperKEKB Injector Linac	4152
	M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou KEK, Ibaraki, Japan
	The SuperKEKB main ring is currently being constructed for aiming at the peak luminosity of 8 x 10³⁵ cm^-2s⁻¹. The electron/positron injector linac upgrade is also going on for increasing the intensity of bunch charge with keeping the small emittance. The key upgrade issues are the construction of positron damping ring, a new positron capture system, and a low emittance photo-cathode rf electron source. The injector linac beam commissioning started in the October of 2013. In this paper, we report the present status and future plan of SuperKEKB injector commissioning.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOY027
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Commissioning of SuperKEKB

1019

Y. Funakoshi, T. Abe, T. Adachi, K. Akai, Y. Arimoto, K. Egawa, Y. Enomoto, J.W. Flanagan, H. Fukuma, K. Furukawa, N. Iida, H. Iinuma, H. Ikeda, T. Ishibashi, M. Iwasaki, T. Kageyama, H. Kaji, T. Kamitani, T. Kawamoto, S. Kazama, M. Kikuchi, T. Kobayashi, K. Kodama, H. Koiso, M. Masuzawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, S. Nakamura, T.T. Nakamura, H. Nakayama, T. Natsui, M. Nishiwaki, K. Ohmi, Y. Ohnishi, T. Oki, S. Sasaki, M. Satoh, Y. Seimiya, K. Shibata, M. Suetake, Y. Suetsugu, H. Sugimoto, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, S. Uehara, S. Uno, X. Wang, K. Watanabe, Y. Yano, S.I. Yoshimoto, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong
KEK, Ibaraki, Japan
D. El Khechen
LAL, Orsay, France

In this report, we describe the machine operation in the first 3 months of the Phase 1 commissioning of SuperKEKB. The beam commissioning is smoothly going on. Vacuum scrubbing, the optics corrections and others are described.

Slides TUOBA01 [9.346 MB]

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUOBA01

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW006

Six-dimensional Phase-space Rotation and its Applications

1754

M. Kuriki, K. Negishi
HU/AdSM, Higashi-Hiroshima, Japan
H. Hayano, R. Kato, K. Ohmi, M. Satoh, Y. Seimiya, J. Urakawa
KEK, Ibaraki, Japan
S. Kashiwagi
Tohoku University, Research Center for Electron Photon Science, Sendai, Japan

Funding: This work is partly supported by Grant-in-Aid for Scientific Research by MEXT, Japan (KAKENHI) 25390126.
Recent progress on the accelerator science requires optimized phase space distributions of the beam for each applications. A classical approach to satisfy the requirements is minimizing the beam emittance with a bunch charge as much as possible. This classical approach is not efficient and not compatible to the beam dynamics nature. 6D phase-space rotation, e.g. z-x and x-y, gives a way to optimize the phase space distribution for various applications. In this article, we discus possible applications of the 6D phase space rotation. The x-y rotation generates the high aspect ratio beam for linear colliders directly without DR (Damping Ring). Combination of bunch clipping with a mechanical slit and x-z rotation can generate micro-bunch structure which is applicable for FEL enhancement and drive beam for dielectric acceleration. We present our theoretical and simulation study on these applications.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW036

Recent Developments and Operational Status of the Compact ERL at KEK

1835

T. Obina, M. Adachi, S. Adachi, T. Akagi, M. Akemoto, D.A. Arakawa, S. Araki, S. Asaoka, M. Egi, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, X.J. Jin, E. Kako, Y. Kamiya, H. Katagiri, R. Kato, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondo, T. Konomi, A. Kosuge, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, N. Nakamura, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, Y. Seimiya, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, N. Terunuma, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, J. Urakawa, K. Watanabe, M. Yamamoto, N. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida
KEK, Ibaraki, Japan
R. Hajima, M. Mori, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma
QST, Tokai, Japan
M. Kuriki
Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan

The Compact Energy Recovery Linac (cERL) at KEK is a test accelerator in order to develop key components to realize remarkable ERL performance as a future light source. After the beam commissioning in December 2013, the legal current limit has been increased step-by-step like 1 uA, 10 uA, and 100 uA. Survey for the source of beam losses has been conducted in each step, and the study on beam dynamics and tuning has also been carried out. As a next step, 1 mA operation is scheduled in February 2016. In parallel to the increase in beam current, a laser Compton scattering (LCS) system which can provide high-flux X-ray to a beamline has been successfully commissioned. We report recent progress in various kinds of beam tuning: improvement of electron gun performance, high bunch charge operation, mitigation of beam losses, LCS optics tuning and bunch compression for THz radiation.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW036

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR040

Emittance Growth by Misalignments and Jitters in SuperKEKB Injector Linac

3871

Y. Seimiya, Y. Enomoto, K. Furukawa, T. Higo, T. Kamitani, F. Miyahara, Y. Ohnishi, M. Satoh, T. Suwada, M. Tanaka
KEK, Ibaraki, Japan

Funding: This work was partly supported by JSPS KAKENHI Grant Number 16K17545.
SuperKEKB injector linac have to transport high-charged beam with low emittance to SuperKEKB ring for high luminosity, 8¥times10³⁵. For the low emittance, photocathode RF gun was adopted as electron source. One of the main reason of the beam emittance blow-up electron linac is generally induced by wakefield in acceleration cavities. A charged beam with a offset from a center of a cavity is affected by the wakefield depending on the offset size in the acceleration cavity and the beam emittance is increased. This emittance blow-up can be eliminated by appropriate steering magnet control so as to cancel the wake effect in the acceleration cavity. We perform particle tracking simulation with some misalignments and beam jitter. Emittance growth by the misalignments and the beam jitter is evaluated in this report.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOW005

A Study of CsK2Sb Multi-alkali Photocathode by Ultraviolet Photoelectron Spectroscopy at UVSOR

3934

SUPSS022

use link to see paper's listing under its alternate paper code

M. Urano, M. Kuriki, K. Negishi
HU/AdSM, Higashi-Hiroshima, Japan
T. Konomi, Y. Seimiya, N. Yamamoto
KEK, Ibaraki, Japan

Photocathode is one of the most important components in the next-generation accelerators, especially based on linear accelerators. Photocathode performance depends not only on electronic state in its bulk material but also on the surface condition. CsK2Sb multi-alkali photocathode is a candidate for the high brightness electron source because of its high quantum efficiency by green laser and its high robustness. We have carried out an UPS (UV Photoelectron Spectroscopy) experiment at UVSOR facility, synchrotron radiation light source in Aichi Japan. We have compared the UPS spectra among several samples, each one has a different quantum efficiency, and try to find physics which decide photocathode's performance. In this case, we focused some characters correlated to the quantum efficiency. I'm going to present a result of this analysis.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOW006

A Study of Operational Lifetime of CsK2Sb Photo-cathode

3938

A. Yokota, R. Kaku, M. Kuriki, K. Negishi, M. Urano
HU/AdSM, Higashi-Hiroshima, Japan
Y. Seimiya
KEK, Ibaraki, Japan

A high performance electron beam generated with a laser photo-cathode is one of the most important pieces in the advanced accelerator. Because the CsK2Sb photo-cathode is robust with more than 10 % quantum efficiency (QE) by green laser (532nm), it is considered to be the best candidates of the cathode for Energy Recovery Lin-ac (ERL) and Free Electron Laser (FEL) requiring a high brightness beam. We developed a system to evaporate the cathode as a thin film in vacuum to study the cathode performance. The cathode operational lifetime regarding not only on time, but also extracted charge density was studied. We found the lifetime is long enough for practical use in an accelerator.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY027

Commissioning Status of SuperKEKB Injector Linac

4152

M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou
KEK, Ibaraki, Japan

The SuperKEKB main ring is currently being constructed for aiming at the peak luminosity of 8 x 10³⁵ cm^-2s⁻¹. The electron/positron injector linac upgrade is also going on for increasing the intensity of bunch charge with keeping the small emittance. The key upgrade issues are the construction of positron damping ring, a new positron capture system, and a low emittance photo-cathode rf electron source. The injector linac beam commissioning started in the October of 2013. In this paper, we report the present status and future plan of SuperKEKB injector commissioning.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOY027

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)