IPAC2016 - List of Authors (Ni, B.)

Paper	Title	Page
WEPMB030	Design Study of a Compact Deflecting Cavity at IHEP	2188
	J.P. Dai, B. Ni, J.Y. Zhai, J.R. Zhang IHEP, Beijing, People's Republic of China
	For the XFEL project proposed by IHEP, a sophisticated beam spreader is required to separate a single beam into multiple beams. One of the deflecting cavities used in the spreader has been investigated and optimized. It is a 325 MHz, compact RF-dipole superconducting cavity, with the transverse R/Q of 2900Ω, geometrical factor G of 88.5 Ω, and the Helium pressure sensitivity df/dp of 3.4 Hz/mbar. At the nominal deflecting voltage of 7MV, the peak electric field Epeak is 41 MV/m and peak magnetic field Bpeak is 48 mT. This paper will present the detailed RF and mechanical designs.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB031	Post Processing of Spoke Type Superconducting Cavities at Institute of High Energy Physics	2191
	J. Dai, J.P. Dai, F.S. He, X. Huang, L.H. Li, Z.Q. Li, H.Y. Lin, Z.C. Liu, B. Ni, W.M. Pan, P. Sha, G.W. Wang, Q.Y. Wang, Z. Xue, X.Y. Zhang, G.Y. Zhao IHEP, Beijing, People's Republic of China
	Funding: Work supported by Chinese Academy of Science strategic Priority Research Program-Future Advanced Nuclear Fission Energy. After upgrading the post-processing system, several superconducting cavities were RF tested at Institute of High Energy Physics (IHEP) in China recently. The test results of 14 spoke 012 cavities and 6 spoke 021 cavities which used at China ADS injector I and linac all exceeds our design objective. Moreover, a spoke 040, a 650MHz elliptical cavity and a 325MHz HWR cavity are also vertical tested and the test results are all significantly surpass our design value. The post processing of these cavities including Buffered Chemical Polishing (BCP), high temperature heat treatment and High Pressure water Rinsing (HPR) is presented here. daijin@pku.edu.cn
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB031
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design Study of a Compact Deflecting Cavity at IHEP

2188

J.P. Dai, B. Ni, J.Y. Zhai, J.R. Zhang
IHEP, Beijing, People's Republic of China

For the XFEL project proposed by IHEP, a sophisticated beam spreader is required to separate a single beam into multiple beams. One of the deflecting cavities used in the spreader has been investigated and optimized. It is a 325 MHz, compact RF-dipole superconducting cavity, with the transverse R/Q of 2900Ω, geometrical factor G of 88.5 Ω, and the Helium pressure sensitivity df/dp of 3.4 Hz/mbar. At the nominal deflecting voltage of 7MV, the peak electric field Epeak is 41 MV/m and peak magnetic field Bpeak is 48 mT. This paper will present the detailed RF and mechanical designs.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB031

Post Processing of Spoke Type Superconducting Cavities at Institute of High Energy Physics

2191

J. Dai, J.P. Dai, F.S. He, X. Huang, L.H. Li, Z.Q. Li, H.Y. Lin, Z.C. Liu, B. Ni, W.M. Pan, P. Sha, G.W. Wang, Q.Y. Wang, Z. Xue, X.Y. Zhang, G.Y. Zhao
IHEP, Beijing, People's Republic of China

Funding: Work supported by Chinese Academy of Science strategic Priority Research Program-Future Advanced Nuclear Fission Energy.
After upgrading the post-processing system, several superconducting cavities were RF tested at Institute of High Energy Physics (IHEP) in China recently. The test results of 14 spoke 012 cavities and 6 spoke 021 cavities which used at China ADS injector I and linac all exceeds our design objective. Moreover, a spoke 040, a 650MHz elliptical cavity and a 325MHz HWR cavity are also vertical tested and the test results are all significantly surpass our design value. The post processing of these cavities including Buffered Chemical Polishing (BCP), high temperature heat treatment and High Pressure water Rinsing (HPR) is presented here.
daijin@pku.edu.cn

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB031

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)