Author: Liuzzo, S.M.
Paper Title Page
TUPMB001 Magnets for the ESRF-EBS Project 1096
 
  • C. Benabderrahmane, J.C. Biasci, J-F. B. Bouteille, J. Chavanne, L. Farvacque, L. Goirand, G. Le Bec, S.M. Liuzzo, P. Raimondi, V. Villar
    ESRF, Grenoble, France
 
  A major upgrade project known as ESRF-EBS, Extremely Brilliant Source is planned at the European Synchrotron Radiation Facility (ESRF) in the coming years. A new storage ring will be built, aiming to decrease the horizontal emittance and to improve the brilliance and coherence of the X-ray beams. The lattice of the new storage ring relies on magnets with demanding specifications: dipoles with longitudinal gradient (field ranging from 0.17 T up to 0.67 T), strong quadrupoles (up to 90 T/m), combined function dipole-quadrupoles with high gradient (0.57 T and 37 T/m), strong sextupoles and octupoles. The design of these magnets is based on innovative solutions; in particular, the longitudinal gradient dipoles are permanent magnets and the combined dipole-quadrupoles are single-sided devices. The design of the magnets is finished and prototypes of innovative magnets have been built. The procurement of the magnets has started. Call for Tenders have been sent to a pre-qualified short list of magnet manufacturers. The longitudinal gradient dipoles will be assembled and measured in house. The design of the magnets, the prototype results and procurement status will be presented.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB001  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPOR001 Lifetime Improvements with a Harmonic RF System for the ESRF EBS 1644
 
  • N. Carmignani, L. Farvacque, J. Jacob, S.M. Liuzzo, B. Nash, T.P. Perron, P. Raimondi, R. Versteegen, S.M. White
    ESRF, Grenoble, France
 
  A third-harmonic RF system to increase the Touschek lifetime is under study for the European Synchrotron Radiation Facility (ESRF) Extremely Brilliant Source (EBS) storage ring, in particular for modes with high current per bunch. Multi-particle simulations have been done to study the bunch lengthening and shape in presence of inductive impedance and a third-harmonic RF system.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOR001  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOW005 Updates on Lattice Modeling and Tuning for the ESRF-EBS Lattice. 2818
 
  • S.M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, G. Le Bec, B. Nash, P. Raimondi, R. Versteegen, S.M. White
    ESRF, Grenoble, France
 
  The ESRF-EBS lattice model is updated to include the effect of magnetic lengths in dipoles, quadrupoles, sextupoles and combined function magnets. The effect of this modification and the updates to the injection cell are considered with particular focus on injection efficiency and Touschek lifetime. The solutions to introduce new sources of radiation suitable for the existing bending magnet radiation beamlines are also presented.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW005  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOW006 Hybrid Multi Bend Achromat at 3 GeV for Future 4th Generation Light Sources 2822
 
  • S.M. Liuzzo, D. Einfeld, L. Farvacque, P. Raimondi
    ESRF, Grenoble, France
 
  Starting from the Hybrid Multi Bend Achromat (HMBA) lattice designed for the 6GeV ESRF-EBS we rescale the lattice energy to 3GeV and optimize the lattice parameters to achieve dynamic apertures sufficient for injection and lifetimes of more than 7h without errors. The rescaling results to an emittance of roughly 140pmrad. Further optimizations of bending magnets longitudinal gradient, optics and sextupole fields show the possibility to further decrease emittance and increase the DA and lifetime. A comparison with other lattice designs is also presented.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW006  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOW044 Study of a Double Triple Bend Achromat (DTBA) Lattice for a 3 GeV Light Source 2940
 
  • A. Alekou, R. Bartolini
    JAI, Oxford, United Kingdom
  • A. Alekou, R. Bartolini
    Oxford University, Physics Department, Oxford, Oxon, United Kingdom
  • A. Alekou, R. Bartolini, T. Pulampong, R.P. Walker
    DLS, Oxfordshire, United Kingdom
  • N. Carmignani, S.M. Liuzzo, P. Raimondi
    ESRF, Grenoble, France
 
  Starting from the concepts of the Hybrid Multi Bend Achromat (HMBA) lattice developed at ESRF and of the Double-Double Bend Achromat (DDBA) lattice developed at Diamond, we present a new cell that includes all the advantages of the two designs. The resulting Double Triple Bend Achromat (DTBA) cell allows for a natural horizontal emittance of less than 100 pm with a large dynamic aperture and lifetime. It includes two straight sections, for insertion devices, five and three meters long. The lattice is consistent with the engineering design developed for the ESRF-EBS lattice and the layout and user requirements of Diamond. The characteristics of the cell are presented together with the results of the optimisation process.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOW044  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOY040 Lattice Translation Between Accelerator Simulation Codes for Superkekb 3077
 
  • D. Zhou, H. Koiso, A. Morita, Y. Ohnishi, K. Oide, H. Sugimoto
    KEK, Ibaraki, Japan
  • M.E. Biagini
    INFN/LNF, Frascati (Roma), Italy
  • N. Carmignani, S.M. Liuzzo
    ESRF, Grenoble, France
  • D. Sagan
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
 
  To improve collaborative studies on beam dynamics for SuperKEKB between several labs, efforts have been made to translate the SAD lattices of SuperKEKB rings to the versions for other codes: AT, Bmad, MAD-X, and PTC. It turns out that lattice translations between these codes are not straightforward because of the complexity of the SuperKEKB lattices. In this paper, we describe our experiences of lattice translations, and present some results of benchmarks for the case of SuperKEKB.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOY040  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMR015 RCDS Optimizations for the ESRF Storage Ring 3420
 
  • S.M. Liuzzo, N. Carmignani, L. Farvacque, B. Nash, T.P. Perron, P. Raimondi, R. Versteegen, S.M. White
    ESRF, Grenoble, France
 
  The Robust Conjugate Direction Search (RCDS)* optimizer is applied for online optimizations of the ESRF accelerators. This paper presents the successful application of the algorithm in reducing vertical emittance, improving injection efficiency and increasing lifetime. A new set of sextupole settings to increase chromaticity has been obtained with lifetimes comparable to the existing one. This allows to run with double current in a single bunch, and unifies the optics for few bunch (except 4x10 bunches) and multi-bunch modes.
* X. Huang, J. Corbett, J. Safranek, J. Wu, "An algorithm for online optimization of accelerators", Nucl. Instr. Methods, A 726 (2013) 77-83.
 
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMR015  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMR016 Horizontal Phase Space Shaping for Optimized Off-axis Injection Efficiency 3424
 
  • S.M. White, S. Lagarde, S.M. Liuzzo, B. Ogier, T.P. Perron, P. Raimondi
    ESRF, Grenoble, France
 
  With the introduction of top-up operation at the ESRF it becomes important to reduce as much as possible any kind of perturbation seen by the users during injection. For this purpose, a novel technique to improve injection efficiency by shaping the horizontal beam phase space to better match the storage ring acceptance and hence reduce the duration of injections was developed. Theoretical concept, simulations and first experimental results are presented.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPMR016  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOR007 Optics Measurements and Corrections at the Early Commissioning of SuperKEKB 3782
 
  • Y. Ohnishi, Y. Funakoshi, H. Koiso, A. Morita, K. Ohmi, K. Oide, H. Sugimoto, D. Zhou
    KEK, Ibaraki, Japan
  • M.E. Biagini, M. Boscolo, S. Guiducci
    INFN/LNF, Frascati (Roma), Italy
  • N. Carmignani, S.M. Liuzzo
    ESRF, Grenoble, France
 
  We present experimental results of measurements and corrections of the optics at the early Phase-1 commissioning of SuperKEKB which is a positron-electron collider built to achieve the target luminosity of 8x1035 cm-2s-1. We have three stages; the Phase-1 is the commissioning of the machine without the final focus magnets and detector solenoid(no collision); the collision with the final focus system and the Belle II detector will be performed at the Phase-2 and Phase-3. The strategy for the luminosity upgrade is a novel "nano-beam'' scheme found elsewhere*. In order to achieve the target luminosity, the vertical emittance has to be reduced by corrections of machine error measured by orbit responses. The vertical emittance should be achieved to be less than 6 pm(0.2 % coupling) during the Phase-1 by fully utilizing correction tools of skew quadrupole-like coils wound on sextupole magnets and power supplies for each correction coil in quadrupole magnets. In addition to the linear optics, the optics for off-momentum particles is also studied to understand a dynamic aperture affects the Touschek lifetime.
* "SuperB Conceptual Design Report", INFN/AE-07/2, SLAV-R-856, LAL 07-15, (2007).
 
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOR007  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)