IPAC2016 - List of Authors (Lin, L.)

Paper	Title	Page
MOPMY016	Quadrature Directional Coupling Method for Precise RF Power Measurement	549
SUPSS096	use link to see paper's listing under its alternate paper code
	B. Du, G. Huang, L. Lin, Y.T. Liu, Z. Zhao USTC/NSRL, Hefei, Anhui, People's Republic of China
	The directional coupler is used in the RF transmission and distribution system of accelerator, to measure the forward and backward power. Due to the finite directional isolation of the coupler (20-30dB normally), the crosstalk exists between the bi-directional coupling output signals. For the typical isolation of 26dB, if the bi-directional crosstalk signals are in- or anti- phase, the error of input or reflected power measurement is 10% in case of total reflection, whilst the error of reflected power measurement is 100% in case of VSWR 1.1. A method of quadrature directional coupling measurement is developed to solve the isolation problem. A pair of directional couplers with 90° phase difference are employed to measure the RF power. The influence of the directional crosstalk would be reduced significantly by processing the measurement data. The prototype of quadrature directional couplers is constructed to verify this method. The results showed that the measurement accuracy of quadrature coupler pair after data process is better than 2% for forward measurement, even if the error of single coupler is over 6%. The paper also analyses the error caused by non-ideal quadrature.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMY016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY002	A Time Domain Analysis Method for RF Noise	2994
	L. Lin, B. Du, G. Huang, Y.T. Liu USTC/NSRL, Hefei, Anhui, People's Republic of China
	A time domain analysis method is developed for the calculation of the longitudinal oscillations caused by the RF noise in the storage ring. This method is based on the impulse response model, and it could calculates the change of transient field caused by beam oscillation and RF noise turn by turn. By means of discrete spectrum analysis, the spectrum of the beam is obtained. According to this analysis method, we developed a simulation pro-gram. The synchronous oscillation of the excited by high RF source with a phase modulation is predicted in this program, and the corresponding experimental measure-ments are carried out on HLS II. The fitting results are in agreed with the experimental measurements.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOY002
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPMY016

Quadrature Directional Coupling Method for Precise RF Power Measurement

549

SUPSS096

use link to see paper's listing under its alternate paper code

B. Du, G. Huang, L. Lin, Y.T. Liu, Z. Zhao
USTC/NSRL, Hefei, Anhui, People's Republic of China

The directional coupler is used in the RF transmission and distribution system of accelerator, to measure the forward and backward power. Due to the finite directional isolation of the coupler (20-30dB normally), the crosstalk exists between the bi-directional coupling output signals. For the typical isolation of 26dB, if the bi-directional crosstalk signals are in- or anti- phase, the error of input or reflected power measurement is 10% in case of total reflection, whilst the error of reflected power measurement is 100% in case of VSWR 1.1. A method of quadrature directional coupling measurement is developed to solve the isolation problem. A pair of directional couplers with 90° phase difference are employed to measure the RF power. The influence of the directional crosstalk would be reduced significantly by processing the measurement data. The prototype of quadrature directional couplers is constructed to verify this method. The results showed that the measurement accuracy of quadrature coupler pair after data process is better than 2% for forward measurement, even if the error of single coupler is over 6%. The paper also analyses the error caused by non-ideal quadrature.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMY016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOY002

A Time Domain Analysis Method for RF Noise

2994

L. Lin, B. Du, G. Huang, Y.T. Liu
USTC/NSRL, Hefei, Anhui, People's Republic of China

A time domain analysis method is developed for the calculation of the longitudinal oscillations caused by the RF noise in the storage ring. This method is based on the impulse response model, and it could calculates the change of transient field caused by beam oscillation and RF noise turn by turn. By means of discrete spectrum analysis, the spectrum of the beam is obtained. According to this analysis method, we developed a simulation pro-gram. The synchronous oscillation of the excited by high RF source with a phase modulation is predicted in this program, and the corresponding experimental measure-ments are carried out on HLS II. The fitting results are in agreed with the experimental measurements.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOY002

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)