Author: Huang, W.-H.
Paper Title Page
MOPMB038 Development of Shoebox BPM for Xi‘an Proton Application Facility 175
 
  • W. Wang, X. Guan, W.-H. Huang, X.W. Wang, Z. Yang, H.Y. Zhang, S.X. Zheng
    TUB, Beijing, People's Republic of China
  • M.T. Qiu, Z.M. Wang
    State Key Laboratory of Intense Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Shannxi, People's Republic of China
 
  In this paper, development of the Shoebox BPM is presented which can be applied for the measurement of turn-by-turn position data, closed orbit and tune of Xi'an Proton Application Facility (XiPAF). The preliminary design of the physical dimensions including the electrode aperture, the pipe aperture and the gap between the two electrodes is performed by calculating their effects on BPM response respectively with the equivalent circuit model. Furthermore, the mechanical structure of the Shoebox BPM is optimized by CST simulation to achieve better performance. The dependency of the BPM sensitivity and zero offset on the frequency is diminished by adding one isolating ring, which decreases coupling capacitance of electrodes and compensates ground capacitance difference of the two electrodes. Finally one prototype of the Shoebox BPM has been fabricated and tested offline. Results show that relative position measurement error due to frequency dependency of sensitivity is less than 1% and absolute measurement error due to frequency dependency of zero offset is expected to be less than 0.1 mm.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMB038  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPOW016 Development of a C-Band 4/8 Mev Dual-Energy Accelerator for Cargo Inspection System 1775
 
  • J.H. Shao, H.B. Chen, W.-H. Huang, Q.X. Jin, Y.H. Liu, J. Shi, C.-X. Tang, X.W. Wu
    TUB, Beijing, People's Republic of China
 
  Modern cargo inspection system applies dual-energy X-ray for material discrimination. Based on the com-pact C-band 6 MeV standing-wave accelerating struc-tures developed at Tsinghua University, a compact C-band 4/8 MeV dual-energy accelerator has been pro-posed, fabricated and tested. Compared with that of the conventional S-band 3/6 MeV dual-energy accelera-tor at Tsinghua University, the volume and the weight of the C-band one has been reduced by ~40% and ~30%, respectively. Detailed review of this C-band dual-energy accelerator is present in the paper.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW016  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPOW018 Tunable High-Intensity Electron Bunch Train Production Based on Nonlinear Longitudinal Space Charge Oscillation 1782
SUPSS016   use link to see paper's listing under its alternate paper code  
 
  • Z. Zhang, H.B. Chen, Y.-C. Du, W.-H. Huang, J. Shi, X.L. Su, C.-X. Tang, Q.L. Tian, D. Wang, W. Wang, L.X. Yan, L.M. Zheng, Z. Zhou
    TUB, Beijing, People's Republic of China
  • W. Gai
    ANL, Argonne, Illinois, USA
 
  High peak current electron bunch trains with tunable terahertz (THz) spacing are produced and measured experimentally. An initial picosecond periodic modulation in the temporal profile of a relativistic electron beam is magnified by the longitudinal space charge forces. As opposed to trying to reduce its smearing effect for large beam current, we take advantages of the nonlinear space charge oscillation through controlling the plasma phase advance. The spacing of the bunch train can be varied continuously either by tuning the velocity bunching of a radio-frequency gun or by tuning the compression of a downstream magnetic chicane. The narrow-band μJ-level THz radiation from the bunch train are also measured with tunable central frequency of the spectral from ~0.5 THz to 1.6 THz. The bunch train measurements are consistent with the particle tracking simulations.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW018  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOW042 Start-to-End Simulation on Terahertz Superradiation of Ultrashort Electron Bunch in an Undulator 4041
 
  • X.L. Su, Y.-C. Du, W.-H. Huang, C.-X. Tang, D. Wang, L.X. Yan, Z. Zhang
    TUB, Beijing, People's Republic of China
 
  The narrowband, intense and frequency-tunable THz radiation can be generated by letting an ultrashort electron bunch pass through an undulator. Start-to-end simulation of terahertz radiation from electron bunch in an undulator is studied in this paper. GPT code is used to track particle distribution from the photocathode RF gun to the entrance of the undulator and Genesis 1.3 is applied to simulate the radiation. The simulation results agree well with theoretical predictions.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW042  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOW059 UV Pulse Shaping with a-BBO Crystals for the Photocathode RF Gun 4079
 
  • D. Wang, W.-H. Huang, L.X. Yan
    TUB, Beijing, People's Republic of China
 
  Recently, manipulation with the drive laser plays a significant role in high brightness electron beam production by the photocathode RF gun. The method based on pulse stacking with birefringent crystal serials was tried to longitudinally shape ultraviolet laser pulse. Using four or five pieces of a-BBO crystals to stack an input UV pulse with appropriate initial duration into 16 or 32 sub-pulses to form quasi flattop UV laser pulse, which can be applied for emittance optimization of the electron beam based on the photocathode RF gun. Moreover, the negative slop of the energy transmittance of a-BBO serials is also revealed to be a passive stabilization mechanism for energy jitter reduction in the driving laser. With appropriate design of a-BBO serials, this method can fulfill the requirements for driving laser in a broad scope of applications such as x-ray FELs and high-power Terahertz(THz) radiation production.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOW059  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOY059 Synchronization System for Tsinghua Thomson Scattering X-ray Source 4237
 
  • J. Yang, Y.-C. Du, W.-H. Huang, D. Wang, L.X. Yan
    TUB, Beijing, People's Republic of China
  • J.M. Byrd, L.R. Doolittle, Q. Du, G. Huang, R.B. Wilcox, Y.L. Xu
    LBNL, Berkeley, California, USA
 
  Tsinghua Thomson scattering X-ray Source (TTX) generates X-ray based on inverse thomson scattering method. The synchronization system for TTX includes reference distribution, normal conducting cavity Low Level RF control and Laser-RF synchronization. In collaboration with LBNL, we're working on a prototype synchronization system for TTX. Some test result based on Tsinghua Thomson scattering X-ray Source were obtained. In this paper we will show the synchronization system design and preliminary test result.  
DOI • reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-THPOY059  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)