IPAC2016 - List of Authors (Hatanaka, K.)

Paper	Title	Page
TUPMB035	Developments of HTS Magnets towards Application to Accelerators	1180
	K. Hatanaka, M. Fukuda, K. Kamakura, H. Ueda, Y. Yasuda, T. Yorita RCNP, Osaka, Japan
	We have been developing magnets utilizing first generation HTS wire for this decade. HTS materials have advantages over LTS materials. Magnets can be operated at 20 K or higher temperature and the cooling structure becomes simpler. Owing to a large margin in operating temperature, it is possible to excite HTS magnets by AC or pulsed currents without quenching. After successful performance tests of proto type models, two magnets have been fabricated for practical use. A cylindrical magnet generates a magnetic field higher than 3.5 T at the center to polarized 210 neV neutrons. A dipole magnet is excited by pulse currents in order to deliver accelerated beams to two target stations by time sharing. Their design and operational performance are discussed.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBB03	A Non-destructive Profile Monitor Using a Gas Sheet	2102
	N. Ogiwara, Y. Hikichi, J. Kamiya, M. Kinsho, Y. Namekawa JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan M. Fukuda, K. Hatanaka, T. Shima RCNP, Osaka, Japan
	We are developing a dense gas-sheet target to realize a non-destructive and fast-response beam profile monitor for 3 GeV rapid cycling synchrotron (RCS) in the J-PARC. This time, to demonstrate the function of the gas sheet for measuring the 2 dimensional profiles of the accelerated beams, the following experiments were carried out: 1) The gas sheet with a thickness of 1.5 mm and the density of 2×10^-4 Pa was generated by the combination of the deep slit and the thin slit. Here, the gas sheet was produced by the deep slit, and the shape of the sheet was improved by the thin slit. 2) For the electron beam of 30 keV with a diameter greater than 0.35 mm, the position and the two-dimensional profiles were well measured using the gas sheet. 3) Then the profiles of the 400 MeV proton beam with a current of 1×10-6 A was well measured, too.
	Slides WEOBB03 [4.718 MB]
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEOBB03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Developments of HTS Magnets towards Application to Accelerators

1180

K. Hatanaka, M. Fukuda, K. Kamakura, H. Ueda, Y. Yasuda, T. Yorita
RCNP, Osaka, Japan

We have been developing magnets utilizing first generation HTS wire for this decade. HTS materials have advantages over LTS materials. Magnets can be operated at 20 K or higher temperature and the cooling structure becomes simpler. Owing to a large margin in operating temperature, it is possible to excite HTS magnets by AC or pulsed currents without quenching. After successful performance tests of proto type models, two magnets have been fabricated for practical use. A cylindrical magnet generates a magnetic field higher than 3.5 T at the center to polarized 210 neV neutrons. A dipole magnet is excited by pulse currents in order to deliver accelerated beams to two target stations by time sharing. Their design and operational performance are discussed.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMB035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBB03

A Non-destructive Profile Monitor Using a Gas Sheet

2102

N. Ogiwara, Y. Hikichi, J. Kamiya, M. Kinsho, Y. Namekawa
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
M. Fukuda, K. Hatanaka, T. Shima
RCNP, Osaka, Japan

We are developing a dense gas-sheet target to realize a non-destructive and fast-response beam profile monitor for 3 GeV rapid cycling synchrotron (RCS) in the J-PARC. This time, to demonstrate the function of the gas sheet for measuring the 2 dimensional profiles of the accelerated beams, the following experiments were carried out: 1) The gas sheet with a thickness of 1.5 mm and the density of 2×10^-4 Pa was generated by the combination of the deep slit and the thin slit. Here, the gas sheet was produced by the deep slit, and the shape of the sheet was improved by the thin slit. 2) For the electron beam of 30 keV with a diameter greater than 0.35 mm, the position and the two-dimensional profiles were well measured using the gas sheet. 3) Then the profiles of the 400 MeV proton beam with a current of 1×10-6 A was well measured, too.

Slides WEOBB03 [4.718 MB]

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEOBB03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)