IPAC2016 - List of Authors (Hara, H.)

Paper	Title	Page
WEPMB016	Vertical Test Results of Nitrogen Doped SRF Cavities at KEK	2154
	K. Umemori, H. Inoue, E. Kako, T. Konomi, T. Kubo, H. Sakai, H. Shimizu, M. Yamanaka KEK, Ibaraki, Japan H. Hara, K. Sennyu, T. Yanagisawa MHI-MS, Kobe, Japan
	Recently Nitrogen doping(N-doping) technique was proposed and drastic improvements of Q-values were reported. Since high-Q operation of SRF cavities are very attractive for CW machine, we started investigation on performance of Nitrogen doped SRF cavities. Nitrogen doping systems were prepared on two vacuum furnaces, which have been used for annealing of SRF cavities. Two fine grain single cell cavities have been used for the study. After 800 degree, 3 hours annealing, N-doping were carried out under several Pa of Nitrogen pressure and followed by post annealing. Three kind of different conditions, pressure and duration time, were attempted. After applying EP-2, cavity performances were evaluated by vertical tests. Against our expectations, we observed lower Q-values, at every measurements, than those measured without N-doping. In this presentation, we describe details about N-doping system and parameters and results obtained by vertical tests. Some discussions are also given against our results.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB026	MHI-MS's Production Activities of Superconducting Cavity	2180
	H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa MHI-MS, Kobe, Japan E. Kako, T. Konomi, H. Nakai, K. Umemori KEK, Ibaraki, Japan
	Mitsubishi Heavy Industries Mechatronics Systems, Ltd. (MHI-MS), a subsidiary of MHI, took over MHI's accelerator business on October 1, 2015, and has been developing the business since that time. MHI-MS has developed manufacturing process of superconducting cavities continuously. In this presentation, recent progress will be reported.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB026
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Vertical Test Results of Nitrogen Doped SRF Cavities at KEK

2154

K. Umemori, H. Inoue, E. Kako, T. Konomi, T. Kubo, H. Sakai, H. Shimizu, M. Yamanaka
KEK, Ibaraki, Japan
H. Hara, K. Sennyu, T. Yanagisawa
MHI-MS, Kobe, Japan

Recently Nitrogen doping(N-doping) technique was proposed and drastic improvements of Q-values were reported. Since high-Q operation of SRF cavities are very attractive for CW machine, we started investigation on performance of Nitrogen doped SRF cavities. Nitrogen doping systems were prepared on two vacuum furnaces, which have been used for annealing of SRF cavities. Two fine grain single cell cavities have been used for the study. After 800 degree, 3 hours annealing, N-doping were carried out under several Pa of Nitrogen pressure and followed by post annealing. Three kind of different conditions, pressure and duration time, were attempted. After applying EP-2, cavity performances were evaluated by vertical tests. Against our expectations, we observed lower Q-values, at every measurements, than those measured without N-doping. In this presentation, we describe details about N-doping system and parameters and results obtained by vertical tests. Some discussions are also given against our results.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMB026

MHI-MS's Production Activities of Superconducting Cavity

2180

H. Hara, A. Miyamoto, K. Sennyu, T. Yanagisawa
MHI-MS, Kobe, Japan
E. Kako, T. Konomi, H. Nakai, K. Umemori
KEK, Ibaraki, Japan

Mitsubishi Heavy Industries Mechatronics Systems, Ltd. (MHI-MS), a subsidiary of MHI, took over MHI's accelerator business on October 1, 2015, and has been developing the business since that time. MHI-MS has developed manufacturing process of superconducting cavities continuously. In this presentation, recent progress will be reported.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB026

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)