IPAC2016 - List of Authors (Devanz, G.)

Paper	Title	Page
WEPMB005	Manufacturing of the IFMIF Series Power Couplers	2122
	H. Jenhani, N. Bazin, N. Berton, G. Devanz, P. Hardy, V.M. Hennion CEA/IRFU, Gif-sur-Yvette, France
	In the framework of the International Fusion Materials Irradiation Facility (IFMIF), which consists of two high power CW accelerator drivers, each delivering a 125 mA deuteron beam at 40 MeV, a Linear IFMIF Prototype Accelerator (LIPAc) is presently under construction for the first phase of the project. Eight power couplers are needed for the cryomodule of LIPAc. After the validation of the two prototypes, the manufacturing of the Series Power Couplers was lunched. This paper will report the status of the manufacturing progress. It will also describe the acceptance tests in addition to the criteria adopted for these critical RF power units. The manufacturing imperfections and some finishing techniques used for the different parts will be also presented and discussed.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR045	Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc	2377
	D. Gex, H. Dzitko, A. Lo Bue, G. Phillips, L. Semeraro, J.M. Zarzalejos F4E, Barcelona, Spain N. Bazin, G. Devanz, P. Hardy CEA/IRFU, Gif-sur-Yvette, France J. Castellanos, J.M. García, D. Jiménez-Rey, D. López, L.M. Martínez, I. Podadera CIEMAT, Madrid, Spain O. Nomen IREC, Sant Adria del Besos, Spain F. Scantamburlo IFMIF/EVEDA, Rokkasho, Japan
	The International Fusion Materials Irradiation Facility (IFMIF) aims to provide an accelerator-based, D-Li neutron source to produce high energy neutrons at sufficient intensity and irradiation volume for DEMO materials qualification. Part of the Broader Approach (BA) agreement between Japan and EURATOM, the goal of the IFMIF/EVEDA project is to work on the engineering design of IFMIF and to validate the main technological challenges which, among a wide diversity of hardware includes the LIPAC (Linear IFMIF Prototype Accelerator), a 125 mA CW deuteron accelerator up to 9 MeV mainly designed and manufactured in Europe. The aim of this paper is to address the engineering issues of the MEBT and SRF linac related to assembly and Integration at LIPAc facility, focusing in the seismic analysis of the beamlines to ensure the robustness of the equipment and the alignment activities with the cutting edge technology performed in Europe before sending the components to Rokkasho. These activities are essential before starting the installation process of the MEBT in the first half of 2016, and to initiate the assembly and integration of the SRF Linac cryomodule in the next phase.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR045
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Manufacturing of the IFMIF Series Power Couplers

2122

H. Jenhani, N. Bazin, N. Berton, G. Devanz, P. Hardy, V.M. Hennion
CEA/IRFU, Gif-sur-Yvette, France

In the framework of the International Fusion Materials Irradiation Facility (IFMIF), which consists of two high power CW accelerator drivers, each delivering a 125 mA deuteron beam at 40 MeV, a Linear IFMIF Prototype Accelerator (LIPAc) is presently under construction for the first phase of the project. Eight power couplers are needed for the cryomodule of LIPAc. After the validation of the two prototypes, the manufacturing of the Series Power Couplers was lunched. This paper will report the status of the manufacturing progress. It will also describe the acceptance tests in addition to the criteria adopted for these critical RF power units. The manufacturing imperfections and some finishing techniques used for the different parts will be also presented and discussed.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMB005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMR045

Engineering Issues of the Medium Energy Beam Transport Line and SRF Linac for the LIPAc

2377

D. Gex, H. Dzitko, A. Lo Bue, G. Phillips, L. Semeraro, J.M. Zarzalejos
F4E, Barcelona, Spain
N. Bazin, G. Devanz, P. Hardy
CEA/IRFU, Gif-sur-Yvette, France
J. Castellanos, J.M. García, D. Jiménez-Rey, D. López, L.M. Martínez, I. Podadera
CIEMAT, Madrid, Spain
O. Nomen
IREC, Sant Adria del Besos, Spain
F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan

The International Fusion Materials Irradiation Facility (IFMIF) aims to provide an accelerator-based, D-Li neutron source to produce high energy neutrons at sufficient intensity and irradiation volume for DEMO materials qualification. Part of the Broader Approach (BA) agreement between Japan and EURATOM, the goal of the IFMIF/EVEDA project is to work on the engineering design of IFMIF and to validate the main technological challenges which, among a wide diversity of hardware includes the LIPAC (Linear IFMIF Prototype Accelerator), a 125 mA CW deuteron accelerator up to 9 MeV mainly designed and manufactured in Europe. The aim of this paper is to address the engineering issues of the MEBT and SRF linac related to assembly and Integration at LIPAc facility, focusing in the seismic analysis of the beamlines to ensure the robustness of the equipment and the alignment activities with the cutting edge technology performed in Europe before sending the components to Rokkasho. These activities are essential before starting the installation process of the MEBT in the first half of 2016, and to initiate the assembly and integration of the SRF Linac cryomodule in the next phase.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMR045

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)