IPAC2016 - List of Authors (Choroba, S.)

Paper	Title	Page
MOPOW006	Planning and Controlling of the Cold Accelerator Sections Installation in XFEL	716
	M. Bousonville, S. Choroba, F. Eints DESY, Hamburg, Germany
	The installation of the main linear accelerator in the 2 km European XFEL (X-Ray Free-Electron Laser) tunnel is currently under way. The accelerator consists of nine so-called cryo-strings. A typical cryo-string comprises 12 accelerator modules, which will be fed by three RF stations. Furthermore, the installation of electronic racks, cables, power and water supply etc. takes place. To enable a most effective installation of the accelerator components, planning and controlling methods, which had first been developed for the RF system work package, were adapted for the entire main linear accelerator. As a first step, a process plan was developed in cooperation with the work package leaders. On the basis of this plan, the installation process is promoted by several measures: The status of the installation is precisely registered by weekly queries which enable monitoring of the progress and feedback to everyone involved. With this information at hand, the installation process can be controlled and plan deviations can be corrected. Furthermore, the experience gained at one cryo-string is used to optimise the plan for the next cryo-string installation.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOW006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW003	High Average RF Power Tests With 2 RF Vacuum Windows at PITZ	1744
	Y. Renier, G. Asova, M. A. Bakr, P. Boonpornprasert, J.D. Good, M. Groß, C. Hernandez-Garcia, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, O. Lishilin, G. Loisch, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevřel, G. Pathak, T. Rublack, I.V. Rybakov, F. Stephan, G. Vashchenko, Q.T. Zhao DESY Zeuthen, Zeuthen, Germany M. Bousonville, S. Choroba, S. Lederer DESY, Hamburg, Germany
	The Photo Injector Test facility at DESY, Zeuthen site (PITZ), was built with the aim to develop and characterize electron sources for future usage at FLASH and at the European XFEL. Recently, the main focus at PITZ has been the study of gun reliability and photoinjector performance at high average power. The goal is to get stable and reliable operation with 6.4 MW peak power in the gun at 650 us RF pulse length and 10 Hz repetition rate. To achieve this, a new RF feed system with two RF windows was installed at PITZ in 2014. During this test, the old gun 4.2 with a modified back-plane design for better cathode contact has been used. In this contribution the results of the RF conditioning of gun 4.2 with a detailed interlock analysis will be reported as well as results from recent electron beam characterization.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Planning and Controlling of the Cold Accelerator Sections Installation in XFEL

716

M. Bousonville, S. Choroba, F. Eints
DESY, Hamburg, Germany

The installation of the main linear accelerator in the 2 km European XFEL (X-Ray Free-Electron Laser) tunnel is currently under way. The accelerator consists of nine so-called cryo-strings. A typical cryo-string comprises 12 accelerator modules, which will be fed by three RF stations. Furthermore, the installation of electronic racks, cables, power and water supply etc. takes place. To enable a most effective installation of the accelerator components, planning and controlling methods, which had first been developed for the RF system work package, were adapted for the entire main linear accelerator. As a first step, a process plan was developed in cooperation with the work package leaders. On the basis of this plan, the installation process is promoted by several measures: The status of the installation is precisely registered by weekly queries which enable monitoring of the progress and feedback to everyone involved. With this information at hand, the installation process can be controlled and plan deviations can be corrected. Furthermore, the experience gained at one cryo-string is used to optimise the plan for the next cryo-string installation.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPOW006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOW003

High Average RF Power Tests With 2 RF Vacuum Windows at PITZ

1744

Y. Renier, G. Asova, M. A. Bakr, P. Boonpornprasert, J.D. Good, M. Groß, C. Hernandez-Garcia, H. Huck, I.I. Isaev, D.K. Kalantaryan, M. Krasilnikov, O. Lishilin, G. Loisch, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevřel, G. Pathak, T. Rublack, I.V. Rybakov, F. Stephan, G. Vashchenko, Q.T. Zhao
DESY Zeuthen, Zeuthen, Germany
M. Bousonville, S. Choroba, S. Lederer
DESY, Hamburg, Germany

The Photo Injector Test facility at DESY, Zeuthen site (PITZ), was built with the aim to develop and characterize electron sources for future usage at FLASH and at the European XFEL. Recently, the main focus at PITZ has been the study of gun reliability and photoinjector performance at high average power. The goal is to get stable and reliable operation with 6.4 MW peak power in the gun at 650 us RF pulse length and 10 Hz repetition rate. To achieve this, a new RF feed system with two RF windows was installed at PITZ in 2014. During this test, the old gun 4.2 with a modified back-plane design for better cathode contact has been used. In this contribution the results of the RF conditioning of gun 4.2 with a detailed interlock analysis will be reported as well as results from recent electron beam characterization.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPOW003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)