IPAC2016 - List of Authors (Celona, L.)

Paper	Title	Page
TUPMR020	In-depth Analysis and Optimization of the European Spallation Source Front End Lattice	1274
	Y.I. Levinsen, M. Eshraqi ESS, Lund, Sweden L. Celona, L. Neri INFN/LNS, Catania, Italy
	The European Spallation Source front end will deliver a 62.5 mA beam current of 2.8 ms duration at 352 MHz to the downstream linac, which in turn will produce a 5 MW proton beam onto the target. Such unprecedented beam power requires a high quality beam with accurate and stable beam parameters in order to assure low beam losses and safe transport through the linac. In this paper we present advanced tuning methods for the low energy beam transport and the radio frequency quadrupole.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR038	The Experimental Beam Line at CNAO	1334
	M. G. Pullia, S. Alpegiani, J. Bosser, E. Bressi, L. Casalegno, G. Ciavola, M. Ciocca, M. Donetti, A. Facoetti, L. Falbo, M. Ferrarini, S. Foglio, S.G. Gioia, V. Lante, L. Lanzavecchia, R. Monferrato, A. Parravicini, M. Pezzetta, C. Priano, E. Rojatti, S. Rossi, S. Savazzi, S. Sironi, S. Toncelli, G. Venchi, B. Vischioni, S. Vitulli, C. Viviani CNAO Foundation, Milan, Italy G. Battistoni Universita' degli Studi di Milano & INFN, Milano, Italy L. Celona, S. Gammino, S. Passarello INFN/LNS, Catania, Italy A. Clozza, E. Di Pasquale, A. Ghigo, L. Pellegrino, R. Ricci, U. Rotundo, C. Sanelli, G. Sensolini, M. Serio INFN/LNF, Frascati (Roma), Italy M. Del Franco Consorzio Laboratorio Nicola Cabibbo, Frascati, Italy S. Giordanengo INFN-Torino, Torino, Italy A.G. Lanza INFN - Pavia, Pavia, Italy R. Sacchi Torino University, Torino, Italy
	The CNAO center has been conceived since the beginning with three treatment rooms and an 'experimental room' where research can be carried out without hindering the clinical activity. The room itself was built since the beginning, but the beam line was planned at a second moment in time to give priority to the treatments. The experimental room beam line has now been designed to be 'general purpose', to be used for research in different fields. Possible activities could be, as an example, irradiation of cells, test of beam monitors, development of in-beam monitoring devices or radiation hardness studies. In a second stage a third source will be added to the present two in order to carry on experiments with additional ion species besides the two used presently for treatments, protons and carbon ions. In this paper a description of the design and of the construction status is given.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY035	Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS	2628
	L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A.S. Spartà, G. Torrisi, S. Vinciguerra INFN/LNS, Catania, Italy S. Di Martino, P. Nicotra Si.A.Tel SRL, Catania, Italy A. Longhitano ALTEK, San Gregorio (CATANIA), Italy G. Torrisi Universitá Mediterranea di Reggio Calabria, Reggio Calabria, Italy
	At Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud (INFN-LNS) - the commissioning of the high intensity Proton Source for the European Spallation Source (PS-ESS) is under way. Preliminary results of plasma diagnostics collected on a testbench called "Flexible Plasma Trap" (FPT) will be correlated to the peculiarities of the magnetic system design and of the microwave injection setup with a view of the possible implications on the beam extraction system. The status of the costruction is presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMY035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

In-depth Analysis and Optimization of the European Spallation Source Front End Lattice

1274

Y.I. Levinsen, M. Eshraqi
ESS, Lund, Sweden
L. Celona, L. Neri
INFN/LNS, Catania, Italy

The European Spallation Source front end will deliver a 62.5 mA beam current of 2.8 ms duration at 352 MHz to the downstream linac, which in turn will produce a 5 MW proton beam onto the target. Such unprecedented beam power requires a high quality beam with accurate and stable beam parameters in order to assure low beam losses and safe transport through the linac. In this paper we present advanced tuning methods for the low energy beam transport and the radio frequency quadrupole.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMR038

The Experimental Beam Line at CNAO

1334

M. G. Pullia, S. Alpegiani, J. Bosser, E. Bressi, L. Casalegno, G. Ciavola, M. Ciocca, M. Donetti, A. Facoetti, L. Falbo, M. Ferrarini, S. Foglio, S.G. Gioia, V. Lante, L. Lanzavecchia, R. Monferrato, A. Parravicini, M. Pezzetta, C. Priano, E. Rojatti, S. Rossi, S. Savazzi, S. Sironi, S. Toncelli, G. Venchi, B. Vischioni, S. Vitulli, C. Viviani
CNAO Foundation, Milan, Italy
G. Battistoni
Universita' degli Studi di Milano & INFN, Milano, Italy
L. Celona, S. Gammino, S. Passarello
INFN/LNS, Catania, Italy
A. Clozza, E. Di Pasquale, A. Ghigo, L. Pellegrino, R. Ricci, U. Rotundo, C. Sanelli, G. Sensolini, M. Serio
INFN/LNF, Frascati (Roma), Italy
M. Del Franco
Consorzio Laboratorio Nicola Cabibbo, Frascati, Italy
S. Giordanengo
INFN-Torino, Torino, Italy
A.G. Lanza
INFN - Pavia, Pavia, Italy
R. Sacchi
Torino University, Torino, Italy

The CNAO center has been conceived since the beginning with three treatment rooms and an 'experimental room' where research can be carried out without hindering the clinical activity. The room itself was built since the beginning, but the beam line was planned at a second moment in time to give priority to the treatments. The experimental room beam line has now been designed to be 'general purpose', to be used for research in different fields. Possible activities could be, as an example, irradiation of cells, test of beam monitors, development of in-beam monitoring devices or radiation hardness studies. In a second stage a third source will be added to the present two in order to carry on experiments with additional ion species besides the two used presently for treatments, protons and carbon ions. In this paper a description of the design and of the construction status is given.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMY035

Preliminary Commissioning Results of the Proton Source for ESS at INFN-LNS

2628

L. Celona, L. Allegra, A. Amato, G. Calabrese, A.C. Caruso, G. Castro, F. Chines, G. Gallo, S. Gammino, O. Leonardi, A. Longhitano, G. Manno, S. Marletta, D. Mascali, A. Maugeri, M. Mazzaglia, L. Neri, S. Passarello, G. Pastore, A. Seminara, A.S. Spartà, G. Torrisi, S. Vinciguerra
INFN/LNS, Catania, Italy
S. Di Martino, P. Nicotra
Si.A.Tel SRL, Catania, Italy
A. Longhitano
ALTEK, San Gregorio (CATANIA), Italy
G. Torrisi
Universitá Mediterranea di Reggio Calabria, Reggio Calabria, Italy

At Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud (INFN-LNS) - the commissioning of the high intensity Proton Source for the European Spallation Source (PS-ESS) is under way. Preliminary results of plasma diagnostics collected on a testbench called "Flexible Plasma Trap" (FPT) will be correlated to the peculiarities of the magnetic system design and of the microwave injection setup with a view of the possible implications on the beam extraction system. The status of the costruction is presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMY035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)