IPAC2011 - List of Authors (Sagan, D.)

Paper	Title	Page
TUPC052	Normal Mode BPM Calibration for Ultralow-Emittance Tuning in Lepton Storage Rings	1114
	A. Wolski The University of Liverpool, Liverpool, United Kingdom D. L. Rubin, D. Sagan, J.P. Shanks CLASSE, Ithaca, New York, USA
	BPMs capable of high-resolution turn-by-turn measurements offer the possibility of new techniques for tuning for ultra-low beam emittance. In this paper, we describe how signals collected from individual buttons during resonant beam excitation can be used to calibrate BPMs to read the beam position in a normal mode coordinate system. This allows for rapid minimization of the mode II emittance, simply by correcting the mode II dispersion. Simulations indicate that the technique is effective and robust, and has the benefit of being insensitive to BPM gain and alignment errors that can limit the effectiveness of other techniques.

WEPC087	Dark Current Simulations for the Cornell ERL	2214
	C.E. Mayes, C.S. Chiu, G.H. Hoffstaetter, V.O. Kostroun, D. Sagan CLASSE, Ithaca, New York, USA L.M. Nash North Carolina University, Chapel Hill, North Carolina, USA
	Funding: Supported by NSF award DMR-0807731 Charged particles unintentionally transported through an accelerator, collectively called the dark current, can be lost in the beam chamber and create a radiation hazard for both equipment and personnel. Here we simulate the creation of particles by field emission in the superconducting accelerating cavities of the Cornell Energy Recovery Linac, and track them to their loss points. These lost particles can then be used to simulate background radiation. The presented calculations are therefore an essential step in the design of appropriate radiation-shielding of components around the linac.

WEPC134	Unified Accelerator Modeling Using the Bmad Software Library	2310
	D. Sagan, I.V. Bazarov, J.Y. Chee, J.A. Crittenden, G. Dugan, K. Finkelstein, G.H. Hoffstaetter, C.E. Mayes, S. Milashuk, D. L. Rubin, J.P. Shanks CLASSE, Ithaca, New York, USA R. Cope CSU, Fort Collins, Colorado, USA
	Funding: Work supported by the National Science Foundation and by the US Department of Energy under contract numbers PHY-0734867 and DE-FC02-08ER41538. The Bmad software library has proved to be a useful tool for accelerator simulations owing to its modular, object-oriented design. It is now used in a number of design, simulation and control programs at the Cornell Laboratory for Accelerator-based Sciences and Education. Work is ongoing to expand Bmad in a number of directions. One aim is tohave a complete framework in order to simulate Cornell's Energy Recovery Linac from Gun cathode (including space-charge) to photon generation to photon tracking through to the x-ray experimental end stations. Other work includes synchrotron radiation tracking including reflections from the vacuum chamber walls which is useful for electron cloud investigations, spin tracking, beam break-up instability, intra-beam scattering, etc. This paper will discuss the current state of the Bmad software along with the long-term goals.

Paper

Title

Page

Normal Mode BPM Calibration for Ultralow-Emittance Tuning in Lepton Storage Rings

1114

A. Wolski
The University of Liverpool, Liverpool, United Kingdom
D. L. Rubin, D. Sagan, J.P. Shanks
CLASSE, Ithaca, New York, USA

BPMs capable of high-resolution turn-by-turn measurements offer the possibility of new techniques for tuning for ultra-low beam emittance. In this paper, we describe how signals collected from individual buttons during resonant beam excitation can be used to calibrate BPMs to read the beam position in a normal mode coordinate system. This allows for rapid minimization of the mode II emittance, simply by correcting the mode II dispersion. Simulations indicate that the technique is effective and robust, and has the benefit of being insensitive to BPM gain and alignment errors that can limit the effectiveness of other techniques.

WEPC087

Dark Current Simulations for the Cornell ERL

2214

C.E. Mayes, C.S. Chiu, G.H. Hoffstaetter, V.O. Kostroun, D. Sagan
CLASSE, Ithaca, New York, USA
L.M. Nash
North Carolina University, Chapel Hill, North Carolina, USA

Funding: Supported by NSF award DMR-0807731
Charged particles unintentionally transported through an accelerator, collectively called the dark current, can be lost in the beam chamber and create a radiation hazard for both equipment and personnel. Here we simulate the creation of particles by field emission in the superconducting accelerating cavities of the Cornell Energy Recovery Linac, and track them to their loss points. These lost particles can then be used to simulate background radiation. The presented calculations are therefore an essential step in the design of appropriate radiation-shielding of components around the linac.

WEPC134

Unified Accelerator Modeling Using the Bmad Software Library

2310

D. Sagan, I.V. Bazarov, J.Y. Chee, J.A. Crittenden, G. Dugan, K. Finkelstein, G.H. Hoffstaetter, C.E. Mayes, S. Milashuk, D. L. Rubin, J.P. Shanks
CLASSE, Ithaca, New York, USA
R. Cope
CSU, Fort Collins, Colorado, USA

Funding: Work supported by the National Science Foundation and by the US Department of Energy under contract numbers PHY-0734867 and DE-FC02-08ER41538.
The Bmad software library has proved to be a useful tool for accelerator simulations owing to its modular, object-oriented design. It is now used in a number of design, simulation and control programs at the Cornell Laboratory for Accelerator-based Sciences and Education. Work is ongoing to expand Bmad in a number of directions. One aim is tohave a complete framework in order to simulate Cornell's Energy Recovery Linac from Gun cathode (including space-charge) to photon generation to photon tracking through to the x-ray experimental end stations. Other work includes synchrotron radiation tracking including reflections from the vacuum chamber walls which is useful for electron cloud investigations, spin tracking, beam break-up instability, intra-beam scattering, etc. This paper will discuss the current state of the Bmad software along with the long-term goals.