Author: Rifuggiato, D.
Paper Title Page
TUPS082 The LEBT Chopper for the Spiral 2 Project 1731
 
  • A.C. Caruso, F. Consoli, G. Gallo, D. Rifuggiato, E. Zappalà
    INFN/LNS, Catania, Italy
  • M. Di Giacomo
    GANIL, Caen, France
  • A. Longhitano
    ALTEK, San Gregorio (CATANIA), Italy
 
  The Spiral 2 driver uses a slow chopper situated in the common section of the low energy beam transport line to change the beam intensity, to cut off the beam in case of critical loss and to avoid hitting the wheel structure of rotating targets. The device has to work up to 10 kV, 1 kHz repetition frequency rate and its design is based on standard power circuits, custom alarm board and vacuum feed-through. The paper summarizes the design principles and describes the test results of the final device which has been installed on the beam line test bench.  
 
WEPS072 A Superconducting Ring Cyclotron to Search for CP Violation in the Neutrino Sector 2670
 
  • L.A.C. Piazza, M.M. Maggiore
    INFN/LNL, Legnaro (PD), Italy
  • L. Calabretta, D. Campo, D. Rifuggiato
    INFN/LNS, Catania, Italy
  • A. Calanna
    CSFNSM, Catania, Italy
 
  Multi Megawatt accelerators are today requested for different use. In particular the experiment DAEdALUS*, recently proposed by MIT scientist to search for CP violation in the neutrino sector, needs three accelerator with energy of about 800 MeV, average power of some MW and duty cycle of 20%. To reduce the cost of the accelerators a cyclotron complex consisting of an injector** and of a booster ring cyclotron has been proposed***. The booster Superconducting Ring Cyclotron, able to accelerate a H2+ molecule beam up to 800 MeV/n and average power higher than 1.6 MW, will be described. Although the average power is 1.6 MW, due to the low duty cycle, the peak power will be 8 MW. The main advantages to accelerate H2+ are a reduction of space charge effects, a simple extraction process, extraction of two beams at the same time from each booster cyclotron to simplify the beam dump. The features of the magnetic sector, of the superconducting coils and the magnetic forces evaluated by the code TOSCA are presented. The isochronous magnetic field, the beam dynamics along the injection and extraction path and during the acceleration are presented, too.
*J.Alonso etal., Novel Search for CP Violation in the Neutrino Sector: DAEdALUS, June2010;e-Print arXiv:1006.0260.
**L.Calabretta, IPAC 2011,this conference.
***L.Calabretta, Cyclotrons 2010, Lanzhou.
 
 
WEPS073 A Low Energy Cyclotron Injector for DAEdALUS Experiment 2673
 
  • L.A.C. Piazza, M.M. Maggiore
    INFN/LNL, Legnaro (PD), Italy
  • L. Calabretta, D. Campo, D. Rifuggiato
    INFN/LNS, Catania, Italy
  • A. Calanna
    CSFNSM, Catania, Italy
 
  Multi Megawatt accelerators are today requested for different use. In particular the experiment DAEdALUS*, recently proposed by MIT scientist to search for CP violation in the neutrino sector, needs three accelerator with energy of about 800 MeV, average power of some MW and duty cycle of 20%. To reduce the cost of the accelerators a cyclotron complex consisting of an injector and of a booster ring cyclotron has been proposed**. The main characteristics of the new kind of a separated sector cyclotron injector able to accelerate a H2+ molecule beam up to 50 MeV/n will be presented. Due to the low duty cycle, the peak current to be accelerated is 5 mA. The problem related to the injection of a H2+ beam, delivered by a compact ion source, and to the space charge effects will be discussed. The main parameters of the magnetic sectors, RF cavities, the isochronous magnetic field and the beam dynamics along the injection and extraction path and during the acceleration will be presented, too.
* J. Alonso et al., “A Novel Search for CP Violation in the Neutrino Sector: DAEdALUS”, June 2010. e-Print: arXiv:1006.0260
** L. Calabretta et al., ICCA, Lanzhou 2010; http://www. JACoW.org.