Author: Miyamoto, A.
Paper Title Page
TUPO009 HiSOR-II, Compact Light Source with an Innovative Lattice Design 1464
 
  • A. Miyamoto, S. Sasaki
    HSRC, Higashi-Hiroshima, Japan
 
  Funding: This work is partially supported by Cooperative and Supporting Program for Researches and Educations in University sponsored by KEK
We proposed a ring that a beam orbit is not closed with one turn and return to starting point after multiple turns around the ring. The idea of this new accumulation ring was inspired based on the torus knot theory. This ring has a long length of the total closed orbit in comparison with a conventional ring which has the orbit of one turn. Therefore this ring can have many straight sections and is advantageous to installation of insertion devices. We are designing a new ring based on the shape of a (3,11) torus knot for our future plan ‘HiSOR-II’. This ring has 11 long straight sections and can place undulators effectively by placing elements such as quadrupole magnets at the place near bending magnet, outside of the orbit crossing section. Furthermore, this ring has about 3 times longer circumference in comparison with the conventional ring, the diameter of the ring is as compact as 15 m, but its circumference is as long as 130 m. On the other hand, this ring must achieve low emittance to operate as the 3rd generation light source ring. Therefore we designed lattice of this ring in reference to MAX-III and achieved low emittance by using bending magnets with combined function.
 
 
TUPO010 An Innovative Lattice Design for a Compact Storage Ring 1467
 
  • S. Sasaki, A. Miyamoto
    HSRC, Higashi-Hiroshima, Japan
 
  Funding: *This work is partially supported by Cooperative and Supporting Program for Researches and Educations in Universities sponsored by KEK.
We propose a new concept of lattice design for a compact light source storage ring. In a ring with this new scheme, the electron beam may have extremely longer design orbit than that of a conventional ring. In this ring, a design orbit closes after completing multiple turns. The lattice for realizing this exotic beam orbit can be made by placing conventional accelerator components such as bending magnets, quadrupole magnets, RF cavity and so forth in an appropriate manner onto a projected torus knot in the horizontal orbit plane. Due to an extended closed orbit length, the ring with this type of lattice has larger maximum stored charge if operated in multiple-bunch mode, and has longer bunch-to-bunch interval if operated in a single-bunch mode. Also, essential for a storage ring as the synchrotron light source, a larger number of straight sections may accommodate with many insertion devices. In addition, this new scheme may provide advantages for designing a oscillator-type free electron laser and coherent radiation light source.