IPAC2011 - List of Authors (Lin, K.-K.)

Paper	Title	Page
WEPC038	Beam Line Design and Beam Measurement for TPS Linac	2091
	K.L. Tsai, H.-P. Chang, C.-T. Chen, C.-S. Fann, K.T. Hsu, S.Y. Hsu, C.-Y. Liao, K.-K. Lin, H.M. Shih NSRRC, Hsinchu, Taiwan K. Dunkel, C. Piel RI Research Instruments GmbH, Bergisch Gladbach, Germany
	A beam line for examining the beam quality of TPS (Taiwan Photon Source) linac was designed and constructed in NSRRC. Beam parameters, such as energy, emittance and charge etc., are verified by using the equipments setup in the beam line for this purpose. The lattice design and its manipulation for the parameter measurements are presented in this report. Preliminary results and the tools associating with the measurement are briefly described.

THPO034	Optimization of a Dual One-turn Coils Kicker Magnet System	3415
	K.L. Tsai, C.-T. Chen, C.-S. Fann, S.Y. Hsu, Y.D. Li, K.-K. Lin, K.-B. Liu, H.M. Shih, Y.S. Wong NSRRC, Hsinchu, Taiwan
	Optimization of a dual one-turn coils configuration for fast kicker magnet system is presented in this report. Emphasis has been made on the: 1) optimization of various possible coils arrangement restricted by the existing available hardware; and 2) synchronization between pulsed currents delivering on the respective upper and lower coils. In the consideration of coils arrangement, good field region is utilized as the guiding parameter while adjusting fixture gap between the coils. As for coil currents timing optimization, fast rise-time and pulse shape preservation are used for practical implementation purpose. Both numerical analysis and experimental data will be presented and discussed.

Paper

Title

Page

Beam Line Design and Beam Measurement for TPS Linac

2091

K.L. Tsai, H.-P. Chang, C.-T. Chen, C.-S. Fann, K.T. Hsu, S.Y. Hsu, C.-Y. Liao, K.-K. Lin, H.M. Shih
NSRRC, Hsinchu, Taiwan
K. Dunkel, C. Piel
RI Research Instruments GmbH, Bergisch Gladbach, Germany

A beam line for examining the beam quality of TPS (Taiwan Photon Source) linac was designed and constructed in NSRRC. Beam parameters, such as energy, emittance and charge etc., are verified by using the equipments setup in the beam line for this purpose. The lattice design and its manipulation for the parameter measurements are presented in this report. Preliminary results and the tools associating with the measurement are briefly described.

THPO034

Optimization of a Dual One-turn Coils Kicker Magnet System

3415

K.L. Tsai, C.-T. Chen, C.-S. Fann, S.Y. Hsu, Y.D. Li, K.-K. Lin, K.-B. Liu, H.M. Shih, Y.S. Wong
NSRRC, Hsinchu, Taiwan

Optimization of a dual one-turn coils configuration for fast kicker magnet system is presented in this report. Emphasis has been made on the: 1) optimization of various possible coils arrangement restricted by the existing available hardware; and 2) synchronization between pulsed currents delivering on the respective upper and lower coils. In the consideration of coils arrangement, good field region is utilized as the guiding parameter while adjusting fixture gap between the coils. As for coil currents timing optimization, fast rise-time and pulse shape preservation are used for practical implementation purpose. Both numerical analysis and experimental data will be presented and discussed.