IPAC2011 - List of Authors (Jugo, J.)

Paper	Title	Page
WEPC152	Android Based Mobile Monitoring System for EPICS Networks: Vacuum System Application*	2337
	I. Badillo, I. Arredondo, M. Eguiraun, J. Feuchtwanger, G. Harper ESS-Bilbao, Zamudio, Spain J. Jugo University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
	Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation. When cabling is not really needed for performance reasons, wireless monitoring is a good choice for large scientific facilities like particle accelerators, due to the quick implementation. There are several wireless flavors: ZigBee, WiFi etc. depending on requirements of specific application. In this work, a wireless monitoring system for EPICS based on an Android device is presented. The task is to monitor the vacuum control system of ISHN project at ESSBilbao, where control system variables are acquired over the network and published in a mobile device. This allows the operator to check process variables everywhere the signal spreads. In this approach, a Python based server is continuously getting EPICS variables via CA protocol and sending them through a WiFi network using ICE middleware, a toolkit oriented to develop distributed applications. Finally, the mobile device reads and shows the data to the operator. The security of the communication is ensured by a limited WiFi signal spread, following the same idea as in NFC for larger distances. With this approach, local monitoring and control applications are easily implemented, useful in starting up and maintenance stages.

WEPC153	ISHN Ion Source Control System Overview and Future Developments	2340
	M. Eguiraun, I. Arredondo, J. Feuchtwanger, G. Harper, M. del Campo ESS-Bilbao, Zamudio, Spain J. Jugo University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain S. Varnasseri ESS Bilbao, Derio, Spain
	Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation. ISHN project consist on a Penning ion source which will deliver up to 65 mA of H⁻ beam pulsed at 50 Hz with a diagnostics vessel for beam testing purposes. The present work summarizes the control system of this research facility, and presents its future developments. ISHN consist of several power supplies for plasma generation and beam extraction, including auxiliary equipment and several diagnostics elements. The control system implemented with LabVIEW is based on PXI systems from National Instruments, using two PXI chassis connected through a dedicated fiber optic link between HV platform and ground. Source operation is managed by a real time processor, while additional tasks are performed by means of an FPGA. In addition, the control system uses a MySQL database for data logging, by means of a LabVIEW application connected to such DB. The integration of EPICS into the control system by deploying a Channel Access Server is the ongoing work, several alternatives are being tested. Finally, a high resolution synchronization system has been designed, for generating timing for triggers of plasma generation and extraction as well as data acquisition for beam diagnostics.

WEPC154	EPICS HyperArchiver: initial tests at ESSBilbao	2343
	M. del Campo ESS-Bilbao, Zamudio, Spain M.G. Giacchini, L.G. Giovannini INFN/LNL, Legnaro (PD), Italy J. Jugo University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
	Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation. The aim of this work is to present the results obtained after different tests performed regarding data storage for an Ion Source, by means of an EPICS control system at ESS-Bilbao (Spain). As a first approach, data was recorded on a MySQL database, using a traditional EPICS RDB Channel Archiver instance, maintained at ORNL SNS (USA). Nevertheless, initial results shown the need of an evolution towards a high performance scalable database. Therefore, current tests are focused on the customization and usage of a HyperArchiver instance, developed at INFN/LNL (Italy), which uses Hypertable as its main database. Hypertable is a distributed, high performance non relational database, released under GNU licence and focused on data-intensive tasks. At ESS Bilbao, a slightly modified version of the HyperArchiver was used, due to the necessity of an improvement on the management of array PVs. Regarding data retrieval and visualization, a python GUI developed at ESS-Bilbao was used, in opposition to the traditional CSS data browser, trying to make data retrieval as fast and simple as possible. Hypertable is presented as a high performance alternative to MySQL for any EPICS control system.

WEPC155	Fast Acquisition Multipurpose Controller with EPICS Integration and Data Logging	2346
	I. Arredondo, D. Belver, P. Echevarria, H. Hassanzadegan, M. del Campo ESS-Bilbao, Zamudio, Spain V. Etxebarria, J. Jugo University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain N. Garmendia, L. Muguira ESS Bilbao, Bilbao, Spain
	Funding: Funding Agency The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation. This work introduces a fast acquisition multipurpose controller (MC), based on a XML configuration with EPICS integration and Data Logging. The main hardware is an FPGA based board, connected to a Host PC. This Host computer acts as the local controller and implements an IOC, integrating the device into an EPICS network. Java has been used as the main programming language in order to make the device fit the desired application. The whole process includes the use of different technologies: JNA to handle FPGA API, JavaIOC to integrate EPICS and XML w3c DOM classes to configure each particular application. Furthermore, a MySQL database is used for data storage, together with the deployment of an EPICS ArchiveEngine instance, offering the possibility to record data from both, the ArchiveEngine and a specifically designed Java library. The developed Java specific tools include different methods: FPGA management, creation and use of EPICS server, mathematical data processing, Archive Engine's MySQL database connection and creation/initialization of the application structure by means of an XML file. This MC has been used to implement a BPM and an LLRF applications for ESS-Bilbao.

TUPC125	Test of the Front-end Electronics and Acquisition System for the LIPAC BPMs	1311
	D. Belver, I. Arredondo, P. Echevarria, J. Feuchtwanger, H. Hassanzadegan, M. del Campo ESS-Bilbao, Zamudio, Spain F.J. Bermejo Bilbao, Faculty of Science and Technology, Bilbao, Spain J.M. Carmona, A. Guirao, A. Ibarra, L.M. Martinez Fresno, I. Podadera CIEMAT, Madrid, Spain V. Etxebarria, J. Jugo, J. Portilla University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain N. Garmendia, L. Muguira ESS Bilbao, Bilbao, Spain
	Funding: Work partially supported by Spanish Ministry of Science and Innovation under project AIC10-A-000441 and ENE2009-11230. Non-interceptive Beam Position Monitors pickups (BPMs) will be installed along the beamlines of the IFMIF/EVEDA linear prototype accelerator (LIPAC) to measure the transverse beam position in the vacuum chamber in order to correct the dipolar and tilt errors. Depending on the location, the BPMs response must be optimized for a beam of 175 MHz bunch repetition, an energy range from 5 up to 9 MeV, a current between 0.1 and 125 mA and continuous and pulse operation. The requirements from beam dynamics for the BPMs are quite stringent, aiming for the position an accuracy below 100 μm and a resolution below 10 μm, and for the phase an accuracy below 2° and a resolution below 0.3°. To meet these specifications, the BPM electronics system developed by ESS-Bilbao has been adapted for its use with the BPMs of LIPAC. This electronics system is divided in an Analog Front-End unit, where the signals are conditioned and converted to baseband, and a Digital Unit to sample them and calculate the position and phase. The electronics system has been tested at CIEMAT with a wire test bench and a prototype BPM. In this contribution, the tests performed will be fully described and the results discussed.

THPS023	Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H⁺ Ion Source	3469
	L. Muguira, I. Arredondo, D. Belver, M. Eguiraun, F.J. Fernandez Huerta, J. Feuchtwanger, N. Garmendia, O. Gonzalez, J. Verdu ESS-Bilbao, Zamudio, Spain V. Etxebarria, J. Jugo, J. Portilla University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
	Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation. The Ion Source responsible intended to generate a high current and low emittance proton beam for the ESS-Bilbao is currently under construction. The plasma in the source is generated by coupling the 2.72 GHz power input from a Klystron through a magnetic field with an intensity close to the electron cyclotron resonance (ECR) field at the input RF frequency. The electrical behavior of the plasma strongly depends on different plasma characteristics which, at the same time, also depend on the microwave absorption. Thus, in order to maximize the RF power transferred to the plasma, a waveguide automatic tuner unit is employed to match the generator output to the electric impedance of the plasma. This device is generally adjusted manually. In this paper, the design, the 1D and 3D simulation, and measurements are presented which allows us to propose an automatic and real time control of the device. In a first approximation, with the aim of testing the proper operation of the automatic tuner unit, an in-house variable phase shifter and attenuator has been designed and manufactured to simulate the electric behavior of the plasma.

Paper

Title

Page

Android Based Mobile Monitoring System for EPICS Networks: Vacuum System Application*

2337

I. Badillo, I. Arredondo, M. Eguiraun, J. Feuchtwanger, G. Harper
ESS-Bilbao, Zamudio, Spain
J. Jugo
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain

Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation.
When cabling is not really needed for performance reasons, wireless monitoring is a good choice for large scientific facilities like particle accelerators, due to the quick implementation. There are several wireless flavors: ZigBee, WiFi etc. depending on requirements of specific application. In this work, a wireless monitoring system for EPICS based on an Android device is presented. The task is to monitor the vacuum control system of ISHN project at ESSBilbao, where control system variables are acquired over the network and published in a mobile device. This allows the operator to check process variables everywhere the signal spreads. In this approach, a Python based server is continuously getting EPICS variables via CA protocol and sending them through a WiFi network using ICE middleware, a toolkit oriented to develop distributed applications. Finally, the mobile device reads and shows the data to the operator. The security of the communication is ensured by a limited WiFi signal spread, following the same idea as in NFC for larger distances. With this approach, local monitoring and control applications are easily implemented, useful in starting up and maintenance stages.

WEPC153

ISHN Ion Source Control System Overview and Future Developments

2340

M. Eguiraun, I. Arredondo, J. Feuchtwanger, G. Harper, M. del Campo
ESS-Bilbao, Zamudio, Spain
J. Jugo
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
S. Varnasseri
ESS Bilbao, Derio, Spain

Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation.
ISHN project consist on a Penning ion source which will deliver up to 65 mA of H⁻ beam pulsed at 50 Hz with a diagnostics vessel for beam testing purposes. The present work summarizes the control system of this research facility, and presents its future developments. ISHN consist of several power supplies for plasma generation and beam extraction, including auxiliary equipment and several diagnostics elements. The control system implemented with LabVIEW is based on PXI systems from National Instruments, using two PXI chassis connected through a dedicated fiber optic link between HV platform and ground. Source operation is managed by a real time processor, while additional tasks are performed by means of an FPGA. In addition, the control system uses a MySQL database for data logging, by means of a LabVIEW application connected to such DB. The integration of EPICS into the control system by deploying a Channel Access Server is the ongoing work, several alternatives are being tested. Finally, a high resolution synchronization system has been designed, for generating timing for triggers of plasma generation and extraction as well as data acquisition for beam diagnostics.

WEPC154

EPICS HyperArchiver: initial tests at ESSBilbao

2343

M. del Campo
ESS-Bilbao, Zamudio, Spain
M.G. Giacchini, L.G. Giovannini
INFN/LNL, Legnaro (PD), Italy
J. Jugo
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain

Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation.
The aim of this work is to present the results obtained after different tests performed regarding data storage for an Ion Source, by means of an EPICS control system at ESS-Bilbao (Spain). As a first approach, data was recorded on a MySQL database, using a traditional EPICS RDB Channel Archiver instance, maintained at ORNL SNS (USA). Nevertheless, initial results shown the need of an evolution towards a high performance scalable database. Therefore, current tests are focused on the customization and usage of a HyperArchiver instance, developed at INFN/LNL (Italy), which uses Hypertable as its main database. Hypertable is a distributed, high performance non relational database, released under GNU licence and focused on data-intensive tasks. At ESS Bilbao, a slightly modified version of the HyperArchiver was used, due to the necessity of an improvement on the management of array PVs. Regarding data retrieval and visualization, a python GUI developed at ESS-Bilbao was used, in opposition to the traditional CSS data browser, trying to make data retrieval as fast and simple as possible. Hypertable is presented as a high performance alternative to MySQL for any EPICS control system.

WEPC155

Fast Acquisition Multipurpose Controller with EPICS Integration and Data Logging

2346

I. Arredondo, D. Belver, P. Echevarria, H. Hassanzadegan, M. del Campo
ESS-Bilbao, Zamudio, Spain
V. Etxebarria, J. Jugo
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
N. Garmendia, L. Muguira
ESS Bilbao, Bilbao, Spain

Funding: Funding Agency The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation.
This work introduces a fast acquisition multipurpose controller (MC), based on a XML configuration with EPICS integration and Data Logging. The main hardware is an FPGA based board, connected to a Host PC. This Host computer acts as the local controller and implements an IOC, integrating the device into an EPICS network. Java has been used as the main programming language in order to make the device fit the desired application. The whole process includes the use of different technologies: JNA to handle FPGA API, JavaIOC to integrate EPICS and XML w3c DOM classes to configure each particular application. Furthermore, a MySQL database is used for data storage, together with the deployment of an EPICS ArchiveEngine instance, offering the possibility to record data from both, the ArchiveEngine and a specifically designed Java library. The developed Java specific tools include different methods: FPGA management, creation and use of EPICS server, mathematical data processing, Archive Engine's MySQL database connection and creation/initialization of the application structure by means of an XML file. This MC has been used to implement a BPM and an LLRF applications for ESS-Bilbao.

TUPC125

Test of the Front-end Electronics and Acquisition System for the LIPAC BPMs

1311

D. Belver, I. Arredondo, P. Echevarria, J. Feuchtwanger, H. Hassanzadegan, M. del Campo
ESS-Bilbao, Zamudio, Spain
F.J. Bermejo
Bilbao, Faculty of Science and Technology, Bilbao, Spain
J.M. Carmona, A. Guirao, A. Ibarra, L.M. Martinez Fresno, I. Podadera
CIEMAT, Madrid, Spain
V. Etxebarria, J. Jugo, J. Portilla
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain
N. Garmendia, L. Muguira
ESS Bilbao, Bilbao, Spain

Funding: Work partially supported by Spanish Ministry of Science and Innovation under project AIC10-A-000441 and ENE2009-11230.
Non-interceptive Beam Position Monitors pickups (BPMs) will be installed along the beamlines of the IFMIF/EVEDA linear prototype accelerator (LIPAC) to measure the transverse beam position in the vacuum chamber in order to correct the dipolar and tilt errors. Depending on the location, the BPMs response must be optimized for a beam of 175 MHz bunch repetition, an energy range from 5 up to 9 MeV, a current between 0.1 and 125 mA and continuous and pulse operation. The requirements from beam dynamics for the BPMs are quite stringent, aiming for the position an accuracy below 100 μm and a resolution below 10 μm, and for the phase an accuracy below 2° and a resolution below 0.3°. To meet these specifications, the BPM electronics system developed by ESS-Bilbao has been adapted for its use with the BPMs of LIPAC. This electronics system is divided in an Analog Front-End unit, where the signals are conditioned and converted to baseband, and a Digital Unit to sample them and calculate the position and phase. The electronics system has been tested at CIEMAT with a wire test bench and a prototype BPM. In this contribution, the tests performed will be fully described and the results discussed.

THPS023

Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H⁺ Ion Source

3469

L. Muguira, I. Arredondo, D. Belver, M. Eguiraun, F.J. Fernandez Huerta, J. Feuchtwanger, N. Garmendia, O. Gonzalez, J. Verdu
ESS-Bilbao, Zamudio, Spain
V. Etxebarria, J. Jugo, J. Portilla
University of the Basque Country, Faculty of Science and Technology, Bilbao, Spain

Funding: The present work is supported by the Basque Government and Spanish Ministry of Science and Innovation.
The Ion Source responsible intended to generate a high current and low emittance proton beam for the ESS-Bilbao is currently under construction. The plasma in the source is generated by coupling the 2.72 GHz power input from a Klystron through a magnetic field with an intensity close to the electron cyclotron resonance (ECR) field at the input RF frequency. The electrical behavior of the plasma strongly depends on different plasma characteristics which, at the same time, also depend on the microwave absorption. Thus, in order to maximize the RF power transferred to the plasma, a waveguide automatic tuner unit is employed to match the generator output to the electric impedance of the plasma. This device is generally adjusted manually. In this paper, the design, the 1D and 3D simulation, and measurements are presented which allows us to propose an automatic and real time control of the device. In a first approximation, with the aim of testing the proper operation of the automatic tuner unit, an in-house variable phase shifter and attenuator has been designed and manufactured to simulate the electric behavior of the plasma.