Author: Hofmann, I.
Paper Title Page
MOODB03 Capture and Transport of the Laser Accelerated Ion Beams for the LIGHT Project 59
 
  • S.G. Yaramyshev, W.A. Barth, I. Hofmann, A. Orzhekhovskaya
    GSI, Darmstadt, Germany
  • B. Zielbauer
    HIJ, Jena, Germany
 
  Funding: Work supported by EURATOM (IFK KiT Program) and HIC for FAIR
An impressive advantage of Laser Ion Sources is an extremely high beam brilliance. The LIGHT project (Laser Ion Generation, Handling and Transport) is dedicated to the production of protons (ions), accelerated up to 10 MeV by using the GSI PHELIX laser at GSI, and injected into a conventional accelerator. A successful experimental campaign stimulated further investigation of the focusing, transport and collimation of the high energy and high brilliance proton beam. In addition to the advanced codes, describing the very early expansion phase of the proton-electron cloud, the versatile multiparticle code DYNAMION was implemented to perform beam dynamics simulations for different possible transport lines. Potentially transport lines compraises magnetic quadrupole lenses and/or solenoids for transverse beam focusing. A bunch rotation rf cavity decreasing the energy spread of the protons was included into the simulations. The results of the beam dynamics simulations are presented, as well as benchmarking activities with other codes. Further developments of the experimental test stand and the different possibilities of its integration to the GSI accelerators chain are discussed.
 
slides icon Slides MOODB03 [2.185 MB]  
 
WEPZ002 Chromatic, Geometric and Space Charge Effects on Laser Accelerated Protons Focused by a Solenoid 2766
 
  • H.Y. Al-Omari, U. Ratzinger
    IAP, Frankfurt am Main, Germany
  • I. Hofmann
    GSI, Darmstadt, Germany
 
  We studied numerically emittance and transmission effects by chromatic and geometric aberrations, with and without space charge, for a proton beam behind a solenoid in the laser proton experiment LIGHT at GSI. The TraceWin code was employed using a field map for the solenoid and an initial distribution with exponential energy dependence close to the experiment. The results show a strong effect of chromatic, and a relatively weak one of geometric aberrations as well as dependence of proton transmission on distance from the solenoid. The chromatic effect has an energy filtering property due to the finite radius beam pipe. Furthermore, a relatively modest dependence of transmission on space charge is found for p production intensity below 1011.  
 
THPS033 Skew Quadrupole Effects on Multi-turn injection Efficiency in the SIS18 3490
 
  • W.M. Daqa, I. Hofmann, J. Struckmeier
    GSI, Darmstadt, Germany
 
  Funding: DAAD ( Deutscher Akademischer Austausch Dienst)
One goal of the SIS18 upgrade scheme is concerned about improving the multi-turn injection (MTI) efficiency, in order to reach the required intensities at the targets and to operate effectively as a booster for SIS100. To improve the limitation of the MTI scheme, there were successful attempts in AGS and PS boosters, to use the skew injection scheme and later it was suggested for SIS18. The strength of the skew quadrupoles is optimized together with the horizontal tune, the difference in horizontal to vertical tunes, the incoming beam parameters and the geometrical limitation of SIS lattice. A good optimization implies the emittance exchange, due to linear coupling, to take place partially and just before the return of the beamlet back to its original position at the septum. The present work was done by simulation using the code PARMTRA and compared with measurements. The results show that, depending on the working point, the skew injection scheme can improve the MTI efficiency from 2% up to 12%, taking into account the loss on the septum from inside and on the vertical acceptance.
 
 
WEPS033 Matching a Laser Driven Proton Injector to a CH - Drift Tube Linacs 2556
 
  • A. Almomani, M. Droba, U. Ratzinger
    IAP, Frankfurt am Main, Germany
  • I. Hofmann
    HIJ, Jena, Germany
 
  Experimental results and theoretical predictions in laser acceleration of protons achieved energies of ten to several tens of MeV. The LIGHT project (Laser Ion Generation, Handling and Transport) is proposed to use the PHELIX laser accelerated protons and to provide transport, focusing and injection into a conventional accelerator. This study demonstrates transport and focusing of laser-accelerated 10 MeV protons by a pulsed 18 T magnetic solenoid. The effect of co-moving electrons on the beam dynamics is investigated. The unique features of the proton distribution like small emittances and high yield of the order of 1013 protons per shot open new research area. The possibility of creating laser based injectors for ion accelerators is addressed. With respect to transit energies, direct matching into DTL's seems adequate. The bunch injection into a proposed CH structure is under investigation at IAP Frankfurt. Options and simulation tools are presented.