Author: Biscari, C.
Paper Title Page
TUPC022 Design of the CLIC Drive Beam Recombination Complex 1045
 
  • J. Barranco, P.K. Skowroński, F. Tecker
    CERN, Geneva, Switzerland
  • C. Biscari
    INFN/LNF, Frascati (Roma), Italy
 
  The CLIC Drive Beam Recombination Complex (DBRC) is designed to compress beam pulses from a current of 4.1 A to 100 A before using them to produce RF power in the deceleration lines. The beam is transported isochronously through a complex system consisting of a delay loop, two combiner rings and final turn around. The system is designed to preserve transverse and longitudinal emittances. During the optics design, chromaticity and non-linear dispersion were identified as the main single particle dynamics causes for transverse emittance increase. Different sextupole families are used to compensate these chromatic effects while keeping isochronicity. The bunch length is also adjusted to minimize coherent synchrotron radiation effects on bunch length, energy spread and transverse emittance. Finally, the injection scheme of the combiner rings was improved making the time variable bump created with help of the RF deflectors truly achromatic.  
 
WEPS007 CNAO Synchrotron Commissioning 2496
 
  • C. Priano, G. Balbinot, G. Bazzano, J. Bosser, E. Bressi, M. Caldara, H. Caracciolo, L. Falbo, A. Parravicini, M. Pullia, C. Viviani
    CNAO Foundation, Milan, Italy
  • C. Biscari, A. Ghigo
    INFN/LNF, Frascati (Roma), Italy
 
  The CNAO (National Center for Oncological Hadrontherapy), located in Pavia, is the first Italian center for deep hadrontherapy with proton and carbon ion beams. The CNAO synchrotron initial commissioning has been carried out using proton beams in the full range of energies: 60 to 250 MeV/u. The first foreseen treatments will need energies between 120 and 170 MeV/u. The nominal proton currents have been reached. The energy scaling of the synchrotron systems and parameters leads to an extracted energy that matches the measured particle range better than 0.1 mm, fitting the treatment requirements, with repeatable beam size and beam current in the treatment room at all investigated energies. A summary of the main results of the synchrotron commissioning is presented.  
 
THPZ004 DAΦNE Tune-up for the KLOE-2 Experiment 3687
 
  • C. Milardi, D. Alesini, M.E. Biagini, S. Bini, C. Biscari, R. Boni, M. Boscolo, B. Buonomo, A. Clozza, G.O. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, M. Esposito, L.G. Foggetta, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, S.M. Liuzzo, F. Marcellini, G. Mazzitelli, L. Pellegrino, M.A. Preger, L. Quintieri, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, S. Tomassini, C. Vaccarezza, M. Zobov
    INFN/LNF, Frascati (Roma), Italy
  • S. Bettoni
    PSI, Villigen, Switzerland
 
  Funding: Work supported by the EuCARD research programme within the 'Assessment of Novel Accelerator Concepts' work package (ANAC-WP11).
In its continuous evolution DAΦNE, the Frascati lepton collider, is starting a new run for the KLOE-2 experiment, an upgraded version of the KLOE one. A new interaction region, based on the high luminosity Crab-Waist collision scheme, has been designed, built and installed. Several machine subsystems have been revised according to innovative design concepts in order to improve beam dynamics. Collimators and shieldings have been upgraded in order to minimize the background rates on the detector during coasting as well as injection operation. A wide measurement campaign has been undertaken to verify and quantify the effect of the modifications and to tune-up the collider in view of the 3 years long data-taking foreseen to deliver ~5 fb-1 to the experiment.