IPAC2011 - List of Authors (Ayvazyan, V.)

Paper	Title	Page
MOPC153	Design and Implementation of Automatic Cavity Resonance Frequency Measurement and Tuning Procedure for FLASH and European XFEL Cryogenic Modules	439
	V. Ayvazyan, W. Koprek, D. Kostin, G. Kreps DESY, Hamburg, Germany Z. Geng SLAC, Menlo Park, California, USA
	The superconducting cavities in FLASH and European XFEL should be tuned to the frequency of 1.3 GHz after cool down and adjusted to initial frequency before warm up by stepper motor tuners. The initial frequency is 300 kHz far from the operating frequency (1.3 GHz) to remove mechanical hysteresis of the tuner. The cavities should be relaxed to initial frequency to avoid a plastically deformation. In framework of digital low level RF and DOOCS control systems we have developed a simple automatic procedure for the remote resonance frequency measurement and simultaneous remote tuning for all cavities which are driven from the single klystron. The basic idea is based on frequency sweeping both for driving klystron and for generation of local oscillator frequency with constant RF frequency from master oscillator. The developed system has been used during FLASH commissioning in spring 2010 and is in use for cavity and cryogenic module test stands for European XFEL at DESY.

THPC111	Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse	3146
	V. Vogel, V. Ayvazyan, B. Faatz, K. Flöttmann, D. Lipka, P. Morozov, H. Schlarb, S. Schreiber DESY, Hamburg, Germany
	The Free-Electron Laser in Hamburg (FLASH) is a user facility since 2005, delivering femtosecond short radiation pulses in the wavelength range between 4.1 and 44 nm using the SASE principle. In FLASH, the electron beam is accelerated to 1.25 GeV with L-band superconducting cavities. The electron source is a normal conducting RF-gun photoinjector. The L-band standing wave RF gun has one and a half cells. The gun is operated in burst mode with an RF pulse length of up to 900 microseconds and a repetition rate of 10 Hz. Several hundreds to thousands of bunches are accelerated per second. With 5 MW of pulsed forward power, the dissipated power inside the RF gun is 45 kW. In this paper we propose an operational mode which allows us to reduce the dissipated power to ease operation or to increase the effective duty cycle in the gun by pulsing the gun within one burst. We report on first experimental results at FLASH, where an RF burst of 46μRF-pulses with a length of 10 microseconds separated by 10 microseconds has been successfully generated reducing the dissipated power by a factor of 2.

Paper

Title

Page

Design and Implementation of Automatic Cavity Resonance Frequency Measurement and Tuning Procedure for FLASH and European XFEL Cryogenic Modules

439

V. Ayvazyan, W. Koprek, D. Kostin, G. Kreps
DESY, Hamburg, Germany
Z. Geng
SLAC, Menlo Park, California, USA

The superconducting cavities in FLASH and European XFEL should be tuned to the frequency of 1.3 GHz after cool down and adjusted to initial frequency before warm up by stepper motor tuners. The initial frequency is 300 kHz far from the operating frequency (1.3 GHz) to remove mechanical hysteresis of the tuner. The cavities should be relaxed to initial frequency to avoid a plastically deformation. In framework of digital low level RF and DOOCS control systems we have developed a simple automatic procedure for the remote resonance frequency measurement and simultaneous remote tuning for all cavities which are driven from the single klystron. The basic idea is based on frequency sweeping both for driving klystron and for generation of local oscillator frequency with constant RF frequency from master oscillator. The developed system has been used during FLASH commissioning in spring 2010 and is in use for cavity and cryogenic module test stands for European XFEL at DESY.

THPC111

Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse

3146

V. Vogel, V. Ayvazyan, B. Faatz, K. Flöttmann, D. Lipka, P. Morozov, H. Schlarb, S. Schreiber
DESY, Hamburg, Germany

The Free-Electron Laser in Hamburg (FLASH) is a user facility since 2005, delivering femtosecond short radiation pulses in the wavelength range between 4.1 and 44 nm using the SASE principle. In FLASH, the electron beam is accelerated to 1.25 GeV with L-band superconducting cavities. The electron source is a normal conducting RF-gun photoinjector. The L-band standing wave RF gun has one and a half cells. The gun is operated in burst mode with an RF pulse length of up to 900 microseconds and a repetition rate of 10 Hz. Several hundreds to thousands of bunches are accelerated per second. With 5 MW of pulsed forward power, the dissipated power inside the RF gun is 45 kW. In this paper we propose an operational mode which allows us to reduce the dissipated power to ease operation or to increase the effective duty cycle in the gun by pulsing the gun within one burst. We report on first experimental results at FLASH, where an RF burst of 46μRF-pulses with a length of 10 microseconds separated by 10 microseconds has been successfully generated reducing the dissipated power by a factor of 2.