IPAC2011 - List of Authors (Adolphsen, C.)

Paper

Title

Page

S1-Global Module Tests at STF/KEK

38

D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy

S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.

Slides MOODA02 [2.982 MB]

MOPC067

X-Band Test Station at Lawrence Livermore National Laboratory

235

R.A. Marsh, F. Albert, S.G. Anderson, C.P.J. Barty, G.K. Beer, R.R. Cross, G.A. Deis, C.A. Ebbers, D.J. Gibson, F.V. Hartemann, T.L. Houck
LLNL, Livermore, California, USA
C. Adolphsen, A.E. Candel, T.S. Chu, E.N. Jongewaard, Z. Li, C. Limborg-Deprey, T.O. Raubenheimer, S.G. Tantawi, A.E. Vlieks, F. Wang, J.W. Wang, F. Zhou
SLAC, Menlo Park, California, USA

Funding: This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
An X-band multi-bunch test station is being built at LLNL to investigate the science and technology paths required to boost the current mono-energetic gamma-ray (MEGa-Ray) brightness by orders of magnitude. The test station will consist of a 5.5 cell X-band RF photoinjector, single accelerator section, and beam diagnostics. Beam quality must be exceedingly high in order to produce narrow-bandwidth gamma-rays, requiring a robust state of the art photoinjector. The photoinjector will be a high gradient (200 MV/m peak surface field on the cathode) standing wave structure, featuring a dual feed racetrack coupler, elliptical irises, and an optimized first cell length. A solid-state Scandinova modulator will power a single SLAC XL4 11.424 GHz 50 MW klystron. RF distribution will allow for full powering of the photoinjector with the balance of the RF powering a single accelerator section so that the electron parameters can be measured. The status of the facility will be presented including commissioning schedule and first experiment plans. Future experimental programs pertinent to Compton scattering R&D, high gradient structure testing, and light source development will be discussed.

MOPC143

A Reduced Gradient Output Design for SLAC's XL4 X-Band Klystron

412

A. Jensen, C. Adolphsen, A.E. Candel, M.V. Fazio, E.N. Jongewaard, D.W. Sprehn, A.E. Vlieks, F. Wang
SLAC, Menlo Park, California, USA

Funding: This work was supported by the U.S. Department of Energy under contract DE-AC03-76SF00515.
X-band klystron work began at SLAC in the mid to late 1980's to develop high frequency (4 times the SLAC S-band klystron), high power RF sources for the linear collider designs under consideration at that time. This work culminated in the current workhorse X-band RF source, the XL4. To date 26 XL4 tubes have been built. The XL4 4-cell disk loaded traveling wave output structure has a high operating gradient. A new 6-cell structure has been designed to reduce breakdown and to further improve the klystron's robustness. Initial simulations show the 6-cell design reduces the gradient roughly 25% and that the structure is stable. A physical XL4 will be retrofitted with the new output cavity and hot tested in the near future.

TUPO024

Precision X-band Linac Technologies for Nuclear Photonics Gamma-ray Sources

1491

F.V. Hartemann, F. Albert, S.G. Anderson, C.P.J. Barty, A.J. Bayramian, R.R. Cross, G.A. Deis, C.A. Ebbers, D.J. Gibson, T.L. Houck, R.A. Marsh, M. J. Messerly, S.S.Q. Wu
LLNL, Livermore, California, USA
C. Adolphsen, A.E. Candel, T.S. Chu, M.V. Fazio, E.N. Jongewaard, Z. Li, C. Limborg-Deprey, T.O. Raubenheimer, S.G. Tantawi, A.E. Vlieks, F. Wang, J.W. Wang, F. Zhou
SLAC, Menlo Park, California, USA
D. Cutoiu
Horia Hulubei National Institute for Physics and Nuclear Engineering, Bucharest, Romania
D. Ighigeanu, M. Toma
INFLPR, Bucharest - Magurele, Romania
V.A. Semenov
UCB, Berkeley, California, USA

Funding: This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
Nuclear photonics is an emerging field of research requiring new tools, including high spectral brightness, tunable gamma-ray sources; high photon energy, ultrahigh-resolution crystal spectrometers; and novel detectors. This presentation focuses on the precision linac technology required for Compton scattering gamma-ray light sources, and on the optimization of the laser and electron beam pulse format to achieve unprecedented spectral brightness. Within this context, high-gradient X-band technology will be shown to offer optimal performance in a compact package, when used in conjunction with the appropriate pulse format, and photocathode illumination and interaction laser technologies.

THOBB01

Evaluation of Performance, Reliability, and Risk for High Peak Power RF Sources from S-band through X-band for Advanced Accelerator Applications

2882

M.V. Fazio, C. Adolphsen, A. Jensen, C. Pearson, D.W. Sprehn, A.E. Vlieks, F. Wang
SLAC, Menlo Park, California, USA
M.V. Fazio
LANL, Los Alamos, New Mexico, USA

Historically linear accelerator development and the choice of frequency have been driven by the availability of RF power sources. This is also true at the present time and is particularly significant as new accelerators are being conceived and planned over a wide frequency range for FEL light sources and other applications. This paper evaluates the current state of the technology for high peak power RF sources from S-band through X-band including reliability and the facility risk incurred for applications demanding high availability and decades-long operation.

Slides THOBB01 [2.326 MB]

THPC103

Beam Dynamics Study of X-band Linac Driven X-ray FELs

3128

Y. Sun, C. Adolphsen, C. Limborg-Deprey, T.O. Raubenheimer, J. Wu
SLAC, Menlo Park, California, USA

Funding: Work supported by the DOE under Contract DE-AC02-76SF00515
Several linac driven X-ray Free Electron Lasers (XFELs) are being developed to provide high brightness photon beams with very short, tunable wavelengths. In this paper, three XFEL configurations are proposed that achieve LCLS-like performance using X-band linac drivers. These linacs are more versatile, efficient and compact than ones using S-band or C-band rf technology. For each of the designs, the overall accelerator layout and the shaping of the bunch longitudinal phase space are described briefly.

Paper	Title	Page
MOODA02	S1-Global Module Tests at STF/KEK	38
	D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy
	S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.
	Slides MOODA02 [2.982 MB]

MOPC067	X-Band Test Station at Lawrence Livermore National Laboratory	235
	R.A. Marsh, F. Albert, S.G. Anderson, C.P.J. Barty, G.K. Beer, R.R. Cross, G.A. Deis, C.A. Ebbers, D.J. Gibson, F.V. Hartemann, T.L. Houck LLNL, Livermore, California, USA C. Adolphsen, A.E. Candel, T.S. Chu, E.N. Jongewaard, Z. Li, C. Limborg-Deprey, T.O. Raubenheimer, S.G. Tantawi, A.E. Vlieks, F. Wang, J.W. Wang, F. Zhou SLAC, Menlo Park, California, USA
	Funding: This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. An X-band multi-bunch test station is being built at LLNL to investigate the science and technology paths required to boost the current mono-energetic gamma-ray (MEGa-Ray) brightness by orders of magnitude. The test station will consist of a 5.5 cell X-band RF photoinjector, single accelerator section, and beam diagnostics. Beam quality must be exceedingly high in order to produce narrow-bandwidth gamma-rays, requiring a robust state of the art photoinjector. The photoinjector will be a high gradient (200 MV/m peak surface field on the cathode) standing wave structure, featuring a dual feed racetrack coupler, elliptical irises, and an optimized first cell length. A solid-state Scandinova modulator will power a single SLAC XL4 11.424 GHz 50 MW klystron. RF distribution will allow for full powering of the photoinjector with the balance of the RF powering a single accelerator section so that the electron parameters can be measured. The status of the facility will be presented including commissioning schedule and first experiment plans. Future experimental programs pertinent to Compton scattering R&D, high gradient structure testing, and light source development will be discussed.

MOPC143	A Reduced Gradient Output Design for SLAC's XL4 X-Band Klystron	412
	A. Jensen, C. Adolphsen, A.E. Candel, M.V. Fazio, E.N. Jongewaard, D.W. Sprehn, A.E. Vlieks, F. Wang SLAC, Menlo Park, California, USA
	Funding: This work was supported by the U.S. Department of Energy under contract DE-AC03-76SF00515. X-band klystron work began at SLAC in the mid to late 1980's to develop high frequency (4 times the SLAC S-band klystron), high power RF sources for the linear collider designs under consideration at that time. This work culminated in the current workhorse X-band RF source, the XL4. To date 26 XL4 tubes have been built. The XL4 4-cell disk loaded traveling wave output structure has a high operating gradient. A new 6-cell structure has been designed to reduce breakdown and to further improve the klystron's robustness. Initial simulations show the 6-cell design reduces the gradient roughly 25% and that the structure is stable. A physical XL4 will be retrofitted with the new output cavity and hot tested in the near future.

TUPO024	Precision X-band Linac Technologies for Nuclear Photonics Gamma-ray Sources	1491
	F.V. Hartemann, F. Albert, S.G. Anderson, C.P.J. Barty, A.J. Bayramian, R.R. Cross, G.A. Deis, C.A. Ebbers, D.J. Gibson, T.L. Houck, R.A. Marsh, M. J. Messerly, S.S.Q. Wu LLNL, Livermore, California, USA C. Adolphsen, A.E. Candel, T.S. Chu, M.V. Fazio, E.N. Jongewaard, Z. Li, C. Limborg-Deprey, T.O. Raubenheimer, S.G. Tantawi, A.E. Vlieks, F. Wang, J.W. Wang, F. Zhou SLAC, Menlo Park, California, USA D. Cutoiu Horia Hulubei National Institute for Physics and Nuclear Engineering, Bucharest, Romania D. Ighigeanu, M. Toma INFLPR, Bucharest - Magurele, Romania V.A. Semenov UCB, Berkeley, California, USA
	Funding: This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Nuclear photonics is an emerging field of research requiring new tools, including high spectral brightness, tunable gamma-ray sources; high photon energy, ultrahigh-resolution crystal spectrometers; and novel detectors. This presentation focuses on the precision linac technology required for Compton scattering gamma-ray light sources, and on the optimization of the laser and electron beam pulse format to achieve unprecedented spectral brightness. Within this context, high-gradient X-band technology will be shown to offer optimal performance in a compact package, when used in conjunction with the appropriate pulse format, and photocathode illumination and interaction laser technologies.

THOBB01	Evaluation of Performance, Reliability, and Risk for High Peak Power RF Sources from S-band through X-band for Advanced Accelerator Applications	2882
	M.V. Fazio, C. Adolphsen, A. Jensen, C. Pearson, D.W. Sprehn, A.E. Vlieks, F. Wang SLAC, Menlo Park, California, USA M.V. Fazio LANL, Los Alamos, New Mexico, USA
	Historically linear accelerator development and the choice of frequency have been driven by the availability of RF power sources. This is also true at the present time and is particularly significant as new accelerators are being conceived and planned over a wide frequency range for FEL light sources and other applications. This paper evaluates the current state of the technology for high peak power RF sources from S-band through X-band including reliability and the facility risk incurred for applications demanding high availability and decades-long operation.
	Slides THOBB01 [2.326 MB]

THPC103	Beam Dynamics Study of X-band Linac Driven X-ray FELs	3128
	Y. Sun, C. Adolphsen, C. Limborg-Deprey, T.O. Raubenheimer, J. Wu SLAC, Menlo Park, California, USA
	Funding: Work supported by the DOE under Contract DE-AC02-76SF00515 Several linac driven X-ray Free Electron Lasers (XFELs) are being developed to provide high brightness photon beams with very short, tunable wavelengths. In this paper, three XFEL configurations are proposed that achieve LCLS-like performance using X-band linac drivers. These linacs are more versatile, efficient and compact than ones using S-band or C-band rf technology. For each of the designs, the overall accelerator layout and the shaping of the bunch longitudinal phase space are described briefly.