ICALEPCS2021 - List of Authors (Terunuma, N.)

Paper

Title

Page

TUPV018

KEK LUCX facility Laser-to-RF&RF-to-RF stability study and optimization

K. Popov
Sokendai, Ibaraki, Japan
A. Aryshev, N. Terunuma, J. Urakawa
KEK, Ibaraki, Japan

KEK LUCX facility* is a linear accelerator devoted to the beam instrumentation R&Ds for present and future accelerator systems and colliders including ILC. According to the ILC TDR**, it is necessary to achieve RF-gun Laser-to-RF&RF-to-RF phase stability of 0.35°(RMS) and amplitude stability of 0.07%(RMS) with implementation of the Digital LLRF feedback based on commercially available FPGA board and digital trigger system. As the first step to achieve ILC stability level at KEK-LUCX facility, present Laser-to-RF&RF-to-RF phase and amplitude jitters were measured using time- and frequency-domain techniques. After that, jitter influence on beam parameters after RF-gun and main solenoid magnet was simulated with ASTRA tracking code*** and results were cross-checked during LUCX facility beam operation. Finally, stable digital trigger system and digital LLRF feedback based on HighLand Technology T564 and RedPitaya SIGNALlab-250 modules were implemented. This report demonstrates the results of Laser-to-RF&RF-to-RF phase and amplitude jitter measurements cross-checked with ASTRA simulation and real beam parameters measurements before and after LUCX facility stabilization.
*A. Aryshev et al., Appl. Phys. Lett. 111, 033508 (2017).
**International Linear Collider Reference Design Report, ILC-REPORT-2007-001, 2007.
***https://www.desy.de/~mpyflo/

Poster TUPV018 [2.071 MB]

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper	Title	Page
TUPV018	KEK LUCX facility Laser-to-RF&RF-to-RF stability study and optimization
	K. Popov Sokendai, Ibaraki, Japan A. Aryshev, N. Terunuma, J. Urakawa KEK, Ibaraki, Japan
	KEK LUCX facility* is a linear accelerator devoted to the beam instrumentation R&Ds for present and future accelerator systems and colliders including ILC. According to the ILC TDR, it is necessary to achieve RF-gun Laser-to-RF&RF-to-RF phase stability of 0.35°(RMS) and amplitude stability of 0.07%(RMS) with implementation of the Digital LLRF feedback based on commercially available FPGA board and digital trigger system. As the first step to achieve ILC stability level at KEK-LUCX facility, present Laser-to-RF&RF-to-RF phase and amplitude jitters were measured using time- and frequency-domain techniques. After that, jitter influence on beam parameters after RF-gun and main solenoid magnet was simulated with ASTRA tracking code* and results were cross-checked during LUCX facility beam operation. Finally, stable digital trigger system and digital LLRF feedback based on HighLand Technology T564 and RedPitaya SIGNALlab-250 modules were implemented. This report demonstrates the results of Laser-to-RF&RF-to-RF phase and amplitude jitter measurements cross-checked with ASTRA simulation and real beam parameters measurements before and after LUCX facility stabilization. A. Aryshev et al., Appl. Phys. Lett. 111, 033508 (2017). International Linear Collider Reference Design Report, ILC-REPORT-2007-001, 2007. **https://www.desy.de/~mpyflo/
	Poster TUPV018 [2.071 MB]
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)