ICALEPCS2011 - List of Authors (Lecorche, E.)

Paper

Title

Page

The Spiral2 Radiofrequency Command Control

274

D.T. Touchard, C. Berthe, P. Gillette, M. Lechartier, E. Lécorché, G. Normand
GANIL, Caen, France
Y. Lussignol, D. Uriot
CEA/DSM/IRFU, France

Mainly for carrying out nuclear physics experiences, the SPIRAL2 facility based at Caen in France will aim to provide new radioactive rare ion or high intensity stable ion beams. The driver accelerator uses several radiofrequency systems: RFQ, buncher and superconducting cavities, driven by independent amplifiers and controlled by digital electronics. This low level radiofrequency subsystem is integrated into a regulated loop driven by the control system. A test of a whole system is foreseen to define and check the computer control interface and applications. This paper describes the interfaces to the different RF equipment into the EPICS based computer control system. CSS supervision and foreseen high level tuning XAL/JAVA based applications are also considered.

Poster MOPMN016 [0.986 MB]

MOPMU005

Overview of the Spiral2 Control System Progress

429

E. Lécorché, P. Gillette, C.H. Haquin, E. Lemaître, L. Philippe, D.T. Touchard
GANIL, Caen, France
J.F. Denis, F. Gougnaud, J.-F. Gournay, Y. Lussignol, P. Mattei
CEA/DSM/IRFU, France
P.G. Graehling, J.H. Hosselet, C. Maazouzi
IPHC, Strasbourg Cedex 2, France

Spiral2 whose construction physically started at the beginning of this year at Ganil (Caen, France) will be a new Radioactive Ion Beams facility to extend scientific knowledge in nuclear physics, astrophysics and interdisciplinary researches. The project consists of a high intensity multi-ion accelerator driver delivering beams to a high power production system to generate the Radioactive Ion Beams being then post-accelerated and used within the existing Ganil complex. Resulting from the collaboration between several laboratories, Epics has been adopted as the standard framework for the control command system. At the lower level, pieces of equipment are handled through VME/VxWorks chassis or directly interfaced using the Modbus/TCP protocol; also, Siemens programmable logic controllers are tightly coupled to the control system, being in charge of specific devices or hardware safety systems. The graphical user interface layer integrates both some standard Epics client tools (EDM, CSS under evaluation, etc ) and specific high level applications written in Java, also deriving developments from the Xal framework. Relational databases are involved into the control system for equipment configuration (foreseen), machine representation and configuration, CSS archivers (under evaluation) and Irmis (mainly for process variable description). The first components of the Spiral2 control system are now used in operation within the context of the ion and deuteron sources test platforms. The paper also describes how software development and sharing is managed within the collaboration.

Poster MOPMU005 [2.093 MB]

Paper	Title	Page
MOPMN016	The Spiral2 Radiofrequency Command Control	274
	D.T. Touchard, C. Berthe, P. Gillette, M. Lechartier, E. Lécorché, G. Normand GANIL, Caen, France Y. Lussignol, D. Uriot CEA/DSM/IRFU, France
	Mainly for carrying out nuclear physics experiences, the SPIRAL2 facility based at Caen in France will aim to provide new radioactive rare ion or high intensity stable ion beams. The driver accelerator uses several radiofrequency systems: RFQ, buncher and superconducting cavities, driven by independent amplifiers and controlled by digital electronics. This low level radiofrequency subsystem is integrated into a regulated loop driven by the control system. A test of a whole system is foreseen to define and check the computer control interface and applications. This paper describes the interfaces to the different RF equipment into the EPICS based computer control system. CSS supervision and foreseen high level tuning XAL/JAVA based applications are also considered.
	Poster MOPMN016 [0.986 MB]

MOPMU005	Overview of the Spiral2 Control System Progress	429
	E. Lécorché, P. Gillette, C.H. Haquin, E. Lemaître, L. Philippe, D.T. Touchard GANIL, Caen, France J.F. Denis, F. Gougnaud, J.-F. Gournay, Y. Lussignol, P. Mattei CEA/DSM/IRFU, France P.G. Graehling, J.H. Hosselet, C. Maazouzi IPHC, Strasbourg Cedex 2, France
	Spiral2 whose construction physically started at the beginning of this year at Ganil (Caen, France) will be a new Radioactive Ion Beams facility to extend scientific knowledge in nuclear physics, astrophysics and interdisciplinary researches. The project consists of a high intensity multi-ion accelerator driver delivering beams to a high power production system to generate the Radioactive Ion Beams being then post-accelerated and used within the existing Ganil complex. Resulting from the collaboration between several laboratories, Epics has been adopted as the standard framework for the control command system. At the lower level, pieces of equipment are handled through VME/VxWorks chassis or directly interfaced using the Modbus/TCP protocol; also, Siemens programmable logic controllers are tightly coupled to the control system, being in charge of specific devices or hardware safety systems. The graphical user interface layer integrates both some standard Epics client tools (EDM, CSS under evaluation, etc ) and specific high level applications written in Java, also deriving developments from the Xal framework. Relational databases are involved into the control system for equipment configuration (foreseen), machine representation and configuration, CSS archivers (under evaluation) and Irmis (mainly for process variable description). The first components of the Spiral2 control system are now used in operation within the context of the ion and deuteron sources test platforms. The paper also describes how software development and sharing is managed within the collaboration.
	Poster MOPMU005 [2.093 MB]