ICALEPCS1991 - List of Authors (Otake, Y.)

Paper	Title	Page
S10TS04	The Development of RF Reference Lines and a Timing System for Japan Linear Collider	356
	J. Urakawa, S. Araki, T. Kawamoto, T. Mimashi, Y. Otake, Y. Satoh KEK, Ibaraki, Japan
	The main linac of Japan Linear Collider(JLC) will be operated at an X-band frequency of 11.424 GHz. The positioning of the X-band accelerating structures at JLG requires precise phase synchronisation over about 10 km. Temperature compensated fiber optic cables will be used for the transmission of the 11.424 GHz RF signal. The performance of this transmission line is described. Many timing signals will be also transmitted from the main control room, in which the master RF frequency generator will be situated, via this l.3 ¿m single mode fiber optic link. The outline of the timing system for JLC is given in this paper.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S10TS04
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S11LLC02	Device Controllers Using an Industrial Personal Computer of the PF 2.5-GeV Electron Linac at KEK	378
	Y. Otake, K. Kakihara, K. Nakahara, Y. Ogawa, S. Ohsawa, T. Shidara, M. Yokota KEK, Ibaraki, Japan
	Device controllers for electron guns and slits using an industrial personal computer have been designed and installed in the Photon Factory 2.5-Ge V Electron Linac at KEK. The design concept of the controllers is to realize a reliable system and good productivity of hardware and software by using an industrial personal computer and a programmable sequence controller. The device controllers have been working reliably for several years.
DOI •	reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S11LLC02
About •	Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Development of RF Reference Lines and a Timing System for Japan Linear Collider

356

J. Urakawa, S. Araki, T. Kawamoto, T. Mimashi, Y. Otake, Y. Satoh
KEK, Ibaraki, Japan

The main linac of Japan Linear Collider(JLC) will be operated at an X-band frequency of 11.424 GHz. The positioning of the X-band accelerating structures at JLG requires precise phase synchronisation over about 10 km. Temperature compensated fiber optic cables will be used for the transmission of the 11.424 GHz RF signal. The performance of this transmission line is described. Many timing signals will be also transmitted from the main control room, in which the master RF frequency generator will be situated, via this l.3 ¿m single mode fiber optic link. The outline of the timing system for JLC is given in this paper.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S10TS04

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

S11LLC02

Device Controllers Using an Industrial Personal Computer of the PF 2.5-GeV Electron Linac at KEK

378

Y. Otake, K. Kakihara, K. Nakahara, Y. Ogawa, S. Ohsawa, T. Shidara, M. Yokota
KEK, Ibaraki, Japan

Device controllers for electron guns and slits using an industrial personal computer have been designed and installed in the Photon Factory 2.5-Ge V Electron Linac at KEK. The design concept of the controllers is to realize a reliable system and good productivity of hardware and software by using an industrial personal computer and a programmable sequence controller. The device controllers have been working reliably for several years.

DOI •

reference for this paper ※ doi:10.18429/JACoW-ICALEPCS1991-S11LLC02

About •

Received ※ 11 November 1991 — Accepted ※ 20 November 1991 — Issued ※ 04 December 1992

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)