IBIC2018 - List of Keywords (shielding)

Paper	Title	Other Keywords	Page
MOPC08	Beam Intensity Monitoring with nA Resolution - the Cryogenic Current Comparator (CCC)	cryogenics, antiproton, proton, storage-ring	130
	D.M. Haider, P. Forck, F. Kurian, M. Schwickert, T. Sieber, T. Stöhlker GSI, Darmstadt, Germany H. De Gersem, N. Marsic TEMF, TU Darmstadt, Darmstadt, Germany M.F. Fernandes, J. Tan CERN, Geneva, Switzerland J. Golm, F. Schmidl, P. Seidel FSU Jena, Jena, Germany J. Golm, T. Stöhlker, V. Tympel HIJ, Jena, Germany M. Schmelz, R. Stolz, V. Zakosarenko IPHT, Jena, Germany T. Stöhlker IOQ, Jena, Germany V. Zakosarenko Supracon AG, Jena, Germany
	Funding: Work supported by AVA - Accelerators Validating Antimatter the EU H2020 Marie-Curie Action No. 721559 and by the BMBF under contract No. 05P15SJRBA. The storage of low current beams as well as the long extraction times from the synchrotrons at FAIR require non-destructive beam intensity monitoring with a current resolution of nanoampere. To fulfill this requirement, the concept of the Cryogenic Current Comparator (CCC), based on the low temperature SQUID, is used to obtain an extremely sensitive beam current transformer. During the last years, CCCs have been installed to do measurements of the spill structure in the extraction line of GSI SIS18 and for current monitoring in the CERN Antiproton Decelerator. From these experiences lessons can be learned to facilitate further developments. The goal of the ongoing research is to improve the robustness of the CCC towards external influences, such as vibrations, stray fields and He-pressure variations, as well as to develop a cost-efficient concept for the superconducting shield and the cryostat.
	Poster MOPC08 [1.441 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC08
About •	paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPA03	Test of New Beam Loss Monitors for SOLEIL	storage-ring, detector, controls, electron	215
	N. Hubert, M. El Ajjouri, D. Pédeau SOLEIL, Gif-sur-Yvette, France
	Soleil is currently testing new beam loss monitors to replace its pin-diode based existing system. The new detectors are made of plastic scintillators associated with photomultiplier and connected to Libera BLM dedicated electronics. This new detector should provide both fast (turn by turn) and slow (averaged) loss measurements, post mortem capabilities and should be less sensitive to the beam directivity compared to the pin-diodes. Different methods for a relative calibration of the modules are under investigation, either using a diode (LED) or a cesium radioactive source. Calibration results and first measurements with beam are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPA03
About •	paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPA09	The Monte Carlo Simulation for the Radiation Protection in a Nozzle of HUST-PTF	neutron, proton, radiation, photon	232
	Y.C. Yu, H.D. Guo, Y.Y. Hu, X.Y. Li, Y.J. Lin, P. Tan, L.G. Zhang HUST, Wuhan, People’s Republic of China
	Nozzle is the core component in proton therapy machine, which is closest to the patient and is necessary to consider the radiation impacts on patients and machine. The ionization chamber and the range shifter in active scanning nozzle are the main devices in the beam path that affect the proton beam and produce secondary particles during the collision, causing damage to the patients and machine. In this paper, the spatial distribution of energy deposited in all regions, the distribution of the secondary particles of 70-250MeV proton beam in the nozzle in Huazhong University of Science and Technology Proton Therapy Facility(HUST-PTF) are studied with Monte Carlo software FLUKA in order to provide reference for radiation shielding design. Six types of materials commonly used today as range shifters are analyzed in terms of the influence on radiation, so that the most suitable material will be selected.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPA09
About •	paper received ※ 04 September 2018 paper accepted ※ 12 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPC08

Beam Intensity Monitoring with nA Resolution - the Cryogenic Current Comparator (CCC)

cryogenics, antiproton, proton, storage-ring

130

D.M. Haider, P. Forck, F. Kurian, M. Schwickert, T. Sieber, T. Stöhlker
GSI, Darmstadt, Germany
H. De Gersem, N. Marsic
TEMF, TU Darmstadt, Darmstadt, Germany
M.F. Fernandes, J. Tan
CERN, Geneva, Switzerland
J. Golm, F. Schmidl, P. Seidel
FSU Jena, Jena, Germany
J. Golm, T. Stöhlker, V. Tympel
HIJ, Jena, Germany
M. Schmelz, R. Stolz, V. Zakosarenko
IPHT, Jena, Germany
T. Stöhlker
IOQ, Jena, Germany
V. Zakosarenko
Supracon AG, Jena, Germany

Funding: Work supported by AVA - Accelerators Validating Antimatter the EU H2020 Marie-Curie Action No. 721559 and by the BMBF under contract No. 05P15SJRBA.
The storage of low current beams as well as the long extraction times from the synchrotrons at FAIR require non-destructive beam intensity monitoring with a current resolution of nanoampere. To fulfill this requirement, the concept of the Cryogenic Current Comparator (CCC), based on the low temperature SQUID, is used to obtain an extremely sensitive beam current transformer. During the last years, CCCs have been installed to do measurements of the spill structure in the extraction line of GSI SIS18 and for current monitoring in the CERN Antiproton Decelerator. From these experiences lessons can be learned to facilitate further developments. The goal of the ongoing research is to improve the robustness of the CCC towards external influences, such as vibrations, stray fields and He-pressure variations, as well as to develop a cost-efficient concept for the superconducting shield and the cryostat.

Poster MOPC08 [1.441 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC08

About •

paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPA03

Test of New Beam Loss Monitors for SOLEIL

storage-ring, detector, controls, electron

215

N. Hubert, M. El Ajjouri, D. Pédeau
SOLEIL, Gif-sur-Yvette, France

Soleil is currently testing new beam loss monitors to replace its pin-diode based existing system. The new detectors are made of plastic scintillators associated with photomultiplier and connected to Libera BLM dedicated electronics. This new detector should provide both fast (turn by turn) and slow (averaged) loss measurements, post mortem capabilities and should be less sensitive to the beam directivity compared to the pin-diodes. Different methods for a relative calibration of the modules are under investigation, either using a diode (LED) or a cesium radioactive source. Calibration results and first measurements with beam are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPA03

About •

paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPA09

The Monte Carlo Simulation for the Radiation Protection in a Nozzle of HUST-PTF

neutron, proton, radiation, photon

232

Y.C. Yu, H.D. Guo, Y.Y. Hu, X.Y. Li, Y.J. Lin, P. Tan, L.G. Zhang
HUST, Wuhan, People’s Republic of China

Nozzle is the core component in proton therapy machine, which is closest to the patient and is necessary to consider the radiation impacts on patients and machine. The ionization chamber and the range shifter in active scanning nozzle are the main devices in the beam path that affect the proton beam and produce secondary particles during the collision, causing damage to the patients and machine. In this paper, the spatial distribution of energy deposited in all regions, the distribution of the secondary particles of 70-250MeV proton beam in the nozzle in Huazhong University of Science and Technology Proton Therapy Facility(HUST-PTF) are studied with Monte Carlo software FLUKA in order to provide reference for radiation shielding design. Six types of materials commonly used today as range shifters are analyzed in terms of the influence on radiation, so that the most suitable material will be selected.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPA09

About •

paper received ※ 04 September 2018 paper accepted ※ 12 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)