Paper | Title | Page |
---|---|---|
WEPB10 | Grating Scanner for Measurement of Micron-size Beam Profiles | 448 |
|
||
Funding: The work was partly supported by the program ‘‘Nauka’ of the Russian Ministry of Education and Science, grant # 3.1903.2017 Wire scanners are widely used for transverse beam size diagnostics. The minimum detectable beam size is affected by the diameter of a single wire. The smallest carbon or tungsten wires used so far have diameters of about 4 microns. With the development of modern electron accelerators and the demands from future linear electron-positron colliders, sub-micron beam sizes have to be resolved. In order to increase the resolution, the decrease of the wire diameter is required. The authors of Ref. * proposed to manufacture thin gold stripes of rectangular shape (widths are equal to 1 µm or 2 µm and height is equal to 3 µm) on Si3N4 membrane. We propose to use another arrangement of gold stripes with varying period on a Si substrate. A set of 11 stripes with 1 µm width and 10 micron height with varying gap width in the range 3-0.25 µm ("grating scanner") was simulated by using an analytical model and by the Geant4 code. By moving this scanner across the beam one could measure the Bremsstrahlung yield vs. the coordinate, resulting in an oscillating dependence. The visibility of the resulting image allows defining the beam sizes in the range of 0.5-1.5 µm for the proposed scanner parameters. * S. Borrelli et al., "Generation and Measurement of Sub-Micrometer Relativistic Electron Beams", arXiv:1804.04252v1 [physics.acc-ph] 11 Apr 2018 |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-WEPB10 | |
About • | paper received ※ 05 September 2018 paper accepted ※ 12 September 2018 issue date ※ 29 January 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |