IBIC2018 - List of Authors (Ma, L.)

Paper	Title	Page
MOPC04	Beam Charge Measurement and System Calibration in CSNS	122
	W.L. Huang, F. Li IHEP CSNS, Guangdong Province, People’s Republic of China L. Ma, S. Wang, T.G. Xu IHEP, Beijing, People’s Republic of China
	In China Spallation Neutron Source(CSNS), the beam charge monitors along the ring to the target beam transport line(RTBT) and the ring to the dump beam transport line(RDBT), are consisted of an ICT and three FCTs manufactured by Bergoz. The electronics includes a set of NI PXIe-5160 oscilloscope digitizer, and a Beam Charge Monitor(BCM) from Bergoz as supplementary. The beam charge monitors provide the following information: a) the quantity of protons bombarded the tungsten target; b) the efficiency of particle transportation; c) a T0 signal to the detectors and spectrometers of the white neutron source. With the calibration with an octopus 50Ω terminator in lab and an onboard 16-turn calibrating coils at the local control room, corrections for the introducing the 16-turn calibrating coils and the long cable were made. An accuracy of ±2% for the beam charge measurement during the machine operation has been achieved with the ICT/FCTs and a PXIe-5160 oscilloscope digitizer.
	Poster MOPC04 [3.082 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC04
About •	paper received ※ 04 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Charge Measurement and System Calibration in CSNS

122

W.L. Huang, F. Li
IHEP CSNS, Guangdong Province, People’s Republic of China
L. Ma, S. Wang, T.G. Xu
IHEP, Beijing, People’s Republic of China

In China Spallation Neutron Source(CSNS), the beam charge monitors along the ring to the target beam transport line(RTBT) and the ring to the dump beam transport line(RDBT), are consisted of an ICT and three FCTs manufactured by Bergoz. The electronics includes a set of NI PXIe-5160 oscilloscope digitizer, and a Beam Charge Monitor(BCM) from Bergoz as supplementary. The beam charge monitors provide the following information: a) the quantity of protons bombarded the tungsten target; b) the efficiency of particle transportation; c) a T0 signal to the detectors and spectrometers of the white neutron source. With the calibration with an octopus 50Ω terminator in lab and an onboard 16-turn calibrating coils at the local control room, corrections for the introducing the 16-turn calibrating coils and the long cable were made. An accuracy of ±2% for the beam charge measurement during the machine operation has been achieved with the ICT/FCTs and a PXIe-5160 oscilloscope digitizer.

Poster MOPC04 [3.082 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC04

About •

paper received ※ 04 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)