IBIC2018 - List of Authors (Chen, F.Z.)

Paper	Title	Page
MOPC16	The Development and Applications of Digital BPM Signal Processor on SSRF	147
	L.W. Lai, F.Z. Chen, Y.B. Leng, Y.B. Yan, N. Zhang, W.M. Zhou SSRF, Shanghai, People’s Republic of China
	The development of Digital BPM Signal Processors (DBPM) for SSRF started from 2008. The first prototype for SSRF storage ring was completed in 2012, with turn-by-turn resolution better than 1μm. From 2016 to 2017, SSRF successively constructed two FEL facilities in China, DCLS and SXFEL test facilities. The second ver-sion DBPM was developed and used in large scale during this period to meet the requirements of signal processing for stripline BPMs and cavity BPMs. After that, we turned to the development of DBPM for SSRF storage ring based on the second version hardware, including FPGA firmware, EPICS IOC, EDM control panel. The development was completed and tests were carried out in early 2018. Test results showed that the position data is accurate and can monitor beam movement correctly, and online turn-by-turn position data resolution reaches 0.46μm. This paper will introduce the design of DBPM for the SSRF storage ring and the tests carried out to verify the data accuracy and evaluate the system performance.
	Poster MOPC16 [1.372 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC16
About •	paper received ※ 04 September 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPC17	On-line Crosstalk Measurement and Compensation Algorithm Study of SXFEL Digital BPM System	150
	F.Z. Chen, L.W. Lai, Y.B. Leng, T. Wu, L.Y. Yu SSRF, Shanghai, People’s Republic of China J. Chen, R.X. Yuan SINAP, Shanghai, People’s Republic of China
	Shanghai soft X-ray Free Electron Laser (SXFEL) has acquired the custom designed Digital BPM processor used for signal processing of cavity BPMs and stripline BPMs. In order to realize monitor the beam position accurately, it has high demand for DBPM system performance. Considering the crosstalk may introduce distortion and influence beam position resolution, it is important to analyze and compensate the crosstalk to improve the resolution. We choose the CBPM signal to study the crosstalk for its narrowband and sensitive for phase. The main experiment concept is successive accessing four channels to form a signal transfer matrix, which including amplitude frequency response and phase response information. And the compensation algorithm is acquire four channel readouts, then using the signal transfer matrix to reverse the true signal to ensure the accurate beam position measurement. This concept has already been tested at SXFEL and hopeful to compensate the crosstalk sufficiently.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC17
About •	paper received ※ 05 September 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPC05	Influence of Sampling Rate and Passband on the Performance of Stripline BPM	307
	T. Wu, S.S. Cao, F.Z. Chen, Y.B. Leng, Y.M. Zhou SSRF, Shanghai, People’s Republic of China J. Chen, L.W. Lai SINAP, Shanghai, People’s Republic of China
	It is obviously that the property of SBPM is influenced by data acquisition system, but how the procedure of data acquisition and processing takes effect is still room for enquiring into it. This paper will present some data simulation and experiment results to discuss the function between resolution and pass band, sampling rate or other influence factor. We hope that this paper would give some advice for building up data acquisition system of SBPM.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPC05
About •	paper received ※ 05 September 2018 paper accepted ※ 10 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Development and Applications of Digital BPM Signal Processor on SSRF

147

L.W. Lai, F.Z. Chen, Y.B. Leng, Y.B. Yan, N. Zhang, W.M. Zhou
SSRF, Shanghai, People’s Republic of China

The development of Digital BPM Signal Processors (DBPM) for SSRF started from 2008. The first prototype for SSRF storage ring was completed in 2012, with turn-by-turn resolution better than 1μm. From 2016 to 2017, SSRF successively constructed two FEL facilities in China, DCLS and SXFEL test facilities. The second ver-sion DBPM was developed and used in large scale during this period to meet the requirements of signal processing for stripline BPMs and cavity BPMs. After that, we turned to the development of DBPM for SSRF storage ring based on the second version hardware, including FPGA firmware, EPICS IOC, EDM control panel. The development was completed and tests were carried out in early 2018. Test results showed that the position data is accurate and can monitor beam movement correctly, and online turn-by-turn position data resolution reaches 0.46μm. This paper will introduce the design of DBPM for the SSRF storage ring and the tests carried out to verify the data accuracy and evaluate the system performance.

Poster MOPC16 [1.372 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC16

About •

paper received ※ 04 September 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPC17

On-line Crosstalk Measurement and Compensation Algorithm Study of SXFEL Digital BPM System

150

F.Z. Chen, L.W. Lai, Y.B. Leng, T. Wu, L.Y. Yu
SSRF, Shanghai, People’s Republic of China
J. Chen, R.X. Yuan
SINAP, Shanghai, People’s Republic of China

Shanghai soft X-ray Free Electron Laser (SXFEL) has acquired the custom designed Digital BPM processor used for signal processing of cavity BPMs and stripline BPMs. In order to realize monitor the beam position accurately, it has high demand for DBPM system performance. Considering the crosstalk may introduce distortion and influence beam position resolution, it is important to analyze and compensate the crosstalk to improve the resolution. We choose the CBPM signal to study the crosstalk for its narrowband and sensitive for phase. The main experiment concept is successive accessing four channels to form a signal transfer matrix, which including amplitude frequency response and phase response information. And the compensation algorithm is acquire four channel readouts, then using the signal transfer matrix to reverse the true signal to ensure the accurate beam position measurement. This concept has already been tested at SXFEL and hopeful to compensate the crosstalk sufficiently.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-MOPC17

About •

paper received ※ 05 September 2018 paper accepted ※ 13 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPC05

Influence of Sampling Rate and Passband on the Performance of Stripline BPM

307

T. Wu, S.S. Cao, F.Z. Chen, Y.B. Leng, Y.M. Zhou
SSRF, Shanghai, People’s Republic of China
J. Chen, L.W. Lai
SINAP, Shanghai, People’s Republic of China

It is obviously that the property of SBPM is influenced by data acquisition system, but how the procedure of data acquisition and processing takes effect is still room for enquiring into it. This paper will present some data simulation and experiment results to discuss the function between resolution and pass band, sampling rate or other influence factor. We hope that this paper would give some advice for building up data acquisition system of SBPM.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPC05

About •

paper received ※ 05 September 2018 paper accepted ※ 10 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)