IBIC2016 - List of Keywords (heavy-ion)

Paper	Title	Other Keywords	Page
WEPG34	Heavy Ion Beam Flux and In-situ Energy Measurements at High LET	ion, detector, cyclotron, radiation	700
	S. Mitrofanov, I.V. Kalagin, V.A. Skuratov, Yu.G. Teterev JINR, Dubna, Moscow Region, Russia V.S. Anashin United Rocket and Space Corporation, Institute of Space Device Engineering, Moscow, Russia
	The Russian Space Agency with the TL ISDE involvement has been utilizing ion beams from oxygen up to bismuth delivered from cyclotrons of the FLNR JINR accelerator complex for the SEE testing during last seven years. The detailed overview of the diagnostic set-up features used for low intensity ion beam parameters evaluation and control during the corresponding experiments is presented. Special attention is paid to measurements of ion flux and energy at high LET levels and evaluation of ion beam uniformity over large (200x200 mm) irradiating areas. The online non-invasive (in-situ) time of flight technique designed for low intensity ion beam energy measurements based on scintillation detectors is considered in details. The system has been successfully commissioned and is used routinely in the SEE testing experiments.
	Poster WEPG34 [7.361 MB]
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG34
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEPG34

Heavy Ion Beam Flux and In-situ Energy Measurements at High LET

ion, detector, cyclotron, radiation

700

S. Mitrofanov, I.V. Kalagin, V.A. Skuratov, Yu.G. Teterev
JINR, Dubna, Moscow Region, Russia
V.S. Anashin
United Rocket and Space Corporation, Institute of Space Device Engineering, Moscow, Russia

The Russian Space Agency with the TL ISDE involvement has been utilizing ion beams from oxygen up to bismuth delivered from cyclotrons of the FLNR JINR accelerator complex for the SEE testing during last seven years. The detailed overview of the diagnostic set-up features used for low intensity ion beam parameters evaluation and control during the corresponding experiments is presented. Special attention is paid to measurements of ion flux and energy at high LET levels and evaluation of ion beam uniformity over large (200x200 mm) irradiating areas. The online non-invasive (in-situ) time of flight technique designed for low intensity ion beam energy measurements based on scintillation detectors is considered in details. The system has been successfully commissioned and is used routinely in the SEE testing experiments.

Poster WEPG34 [7.361 MB]

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG34

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)