HB2018 - List of Keywords (flattop)

Paper	Title	Other Keywords	Page
TUP2WA02	Momentum Slip-Stacking Simulations for CERN SPS Ion Beams with Collective Effects	simulation, emittance, ECR, cavity	174
	D. Quartullo, T. Argyropoulos, A. Lasheen CERN, Geneva, Switzerland
	The LHC Injectors Upgrade (LIU) Project at CERN aims at doubling the total intensity of the Pb-ion beam for the High-Luminosity LHC (HL-LHC) project. This goal can be achieved by using momentum slip-stacking (MSS) in the SPS, the LHC injector. This RF gymnastics, originally proposed to increase bunch intensity, will be used on the intermediate energy plateau to interleave two batches, reducing the bunch spacing from 100 to 50 ns. The MSS feasibility can be tested only in 2021, after the beam controls upgrade of the SPS 200 MHz RF system, so beam dynamics simulations are used to design this complicated beam manipulation. Simulations of the MSS were performed using the CERN BLonD code with a full SPS impedance model. Attention has been paid to the choice of the RF and machine parameters (beam energy, time duration, RF frequency and voltage programmes) to reduce losses and the final bunch length which is crucial for the injection into the LHC 400 MHz buckets. The initial beam parameters used in simulations were obtained from beam measurements in the first part of the SPS cycle taking into account bunch-by-bunch losses on flat bottom and development of bunch instabilities.
	Slides TUP2WA02 [8.272 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-TUP2WA02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

TUP2WA02

Momentum Slip-Stacking Simulations for CERN SPS Ion Beams with Collective Effects

simulation, emittance, ECR, cavity

174

D. Quartullo, T. Argyropoulos, A. Lasheen
CERN, Geneva, Switzerland

The LHC Injectors Upgrade (LIU) Project at CERN aims at doubling the total intensity of the Pb-ion beam for the High-Luminosity LHC (HL-LHC) project. This goal can be achieved by using momentum slip-stacking (MSS) in the SPS, the LHC injector. This RF gymnastics, originally proposed to increase bunch intensity, will be used on the intermediate energy plateau to interleave two batches, reducing the bunch spacing from 100 to 50 ns. The MSS feasibility can be tested only in 2021, after the beam controls upgrade of the SPS 200 MHz RF system, so beam dynamics simulations are used to design this complicated beam manipulation. Simulations of the MSS were performed using the CERN BLonD code with a full SPS impedance model. Attention has been paid to the choice of the RF and machine parameters (beam energy, time duration, RF frequency and voltage programmes) to reduce losses and the final bunch length which is crucial for the injection into the LHC 400 MHz buckets. The initial beam parameters used in simulations were obtained from beam measurements in the first part of the SPS cycle taking into account bunch-by-bunch losses on flat bottom and development of bunch instabilities.

Slides TUP2WA02 [8.272 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HB2018-TUP2WA02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)