FEL2019 - List of Authors (Sinn, H.)

Paper	Title	Page
TUA01	Parallel Operation of SASE1 and SASE3 at the European XFEL	25
	S. Liu, F. Brinker, W. Decking, L. Fröhlich, R. Kammering, D. Nölle, F. Obier, E. Schneidmiller, M. Scholz, T. Wilksen, M.V. Yurkov DESY, Hamburg, Germany R. Boll, N. Gerasimova, T. Mazza, M. Meyer, A. Scherz, H. Sinn EuXFEL, Schenefeld, Germany
	At the European XFEL a hard X-Ray SASE FEL (SA-SE1) and a soft X-Ray SASE FEL (SASE3) share in series the same electron beamline. This configuration couples the operation conditions for both undulators and their subsequent user experiments in terms of SASE in-tensity and background. We report on our experience in parallel operation and discuss the solutions that enable the operation of both undulators as independently as possible.
	Slides TUA01 [13.809 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA01
About •	paper received ※ 26 August 2019 paper accepted ※ 17 October 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUA04	Harmonic Lasing Experiment at the European XFEL	29
	E. Schneidmiller, F. Brinker, W. Decking, M.W. Guetg, S. Liu, D. Nölle, M. Scholz, M.V. Yurkov, I. Zagorodnov DESY, Hamburg, Germany G. Geloni, N. Gerasimova, J. Grünert, S. Karabekyan, N.G. Kujala, J. Laksman, Y. Li, J. Liu, Th. Maltezopoulos, I. Petrov, L. Samoylova, S. Serkez, H. Sinn, F. Wolff-Fabris EuXFEL, Hamburg, Germany
	Harmonic lasing is an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was successfully tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this contribution we present recent results from the European XFEL where we successfully demonstrated operation of HLSS FEL at 5.9 Angstrom and 2.8 Angstrom, in the latter case obtaining both 3rd and 5th harmonic lasing.
	Slides TUA04 [1.174 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA04
About •	paper received ※ 20 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP009	Integration of an XFELO at the European XFEL Facility	62
	P. Rauer, I. Bahns, W. Hillert, J. Roßbach University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany W. Decking DESY, Hamburg, Germany H. Sinn EuXFEL, Schenefeld, Germany
	Funding: Work supported by BMBF (FKZ 05K16GU4) An X-ray free-electron laser oscillator (XFELO) is a fourth generation X-ray source promising radiation with full three dimensional coherence, nearly constant pulse to pulse stability and more than an order of magnitude higher peak brilliance compared to SASE FELs. Proposed by Kim et al. in 2008 [1] an XFELO follows the concept of circulating the light in an optical cavity - as known from FEL oscillators in longer wavelength regimes - but uses Bragg reflecting crystals instead of classical mirrors. With the new European X-ray Free-Electron Laser (XFEL) facility recently gone into operation, the realization of an XFELO with radiation in the Angstrom regime seems feasible. Though, the high thermal load of the radiation on the cavity crystals, the high sensibility of the Bragg-reflection on reflection angle and crystal temperature as well as the very demanding tolerances of the at least 60 m long optical resonator path pose challenges which need to be considered. In this work these problems shall be summarized and results regarding the possible integration of an XFELO at the European XFEL facility will be presented. [1] K.-J. Kim, Y. Shvyd’ko and S. Reiche, Phys. Rev. Lett. 100 (2008), 244802.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP009
About •	paper received ※ 20 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP056	Feasibility Studies of the 100 keV Undulator Line of the European XFEL	172
	E. Schneidmiller, V. Balandin, W. Decking, M. Dohlus, N. Golubeva, D. Nölle, M.V. Yurkov, I. Zagorodnov DESY, Hamburg, Germany G. Geloni, Y. Li, S. Molodtsov, J. Pflüger, S. Serkez, H. Sinn, T. Tanikawa, S. Tomin EuXFEL, Hamburg, Germany
	The European XFEL is a multi-user X-ray FEL facility based on superconducting linear accelerator. Presently, three undulators (SASE1, SASE2, SASE3) deliver high-brightness soft- and hard- X-ray beams for users. There are two empty undulator tunnels that were originally designed to operate with spontaneous radiators. We consider instead a possible installation of two FEL undulators. One of them (SASE4) is proposed for the operation in ultrahard X-ray regime, up to the photon energy of 100 keV. In this contribution we present the results of the first feasibility studies of this option.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP056
About •	paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP058	First Characterization of the Photon Beam at the European XFEL in July, 2017	180
	V. Balandin, B. Beutner, F. Brinker, W. Decking, M. Dohlus, L. Fröhlich, U. Jastrow, R. Kammering, T. Limberg, D. Nölle, M. Scholz, A.A. Sorokin, K.I. Tiedtke, M.V. Yurkov, I. Zagorodnov DESY, Hamburg, Germany U. Boesenberg, W. Freund, J. Grünert, A. Koch, N.G. Kujala, J. Liu, Th. Maltezopoulos, M. Messerschmidt, I. Petrov, L. Samoylova, H. Sinn EuXFEL, Schenefeld, Germany
	North branch of the European XFEL, SASE1, produced first light on May 3rd, 2017, and XFEL operation has been gradually improved then. First characterization of the photon beam has been performed in July / August 2017, just before an official starting date of user experiments (September 1st, 2017). Energy of the electron beam was 14 GeV, bunch charge was 500 pC, photon energy was 9.3 keV. With photon diagnostics available at that time (X-ray gas monitor (XGM) and FEL imager) we measured the gain curve and traced evolution of the FEL radiation mode along the undulator. An important conclusion is that experimental results demonstrate reasonable agreement with baseline parameters. Developed techniques of the photon beam characterization also provided solid base for identification of the problems and means for improving SASE FEL tuning and operation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP058
About •	paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP079	Status of the Hard X-Ray Self-Seeding Setup at the European XFEL	242
	G. Geloni, S. Karabekyan, D. La Civita, L. Samoylova, S. Serkez, R. Shayduk, H. Sinn, V. Sleziona, M. Vannoni, M. Yakopov EuXFEL, Schenefeld, Germany J.W.J. Anton, S.P. Kearney, D. Shu ANL, Lemont, Illinois, USA V.D. Blank, S. Terentiev TISNCM, Troitsk, Russia W. Decking, V. Kocharyan, S. Liu, E. Negodin, E. Saldin, T. Wohlenberg DESY, Hamburg, Germany X. Dong European X-Ray Free-Electron Laser Facility GmbH, Schelefeld, Germany
	A Hard X-Ray Self-Seeding (HXRSS) setup will be soon commissioned at the European XFEL. It relies on a two-chicanes scheme to deal, in particular, with the high pulse repetition rate of the facility. In this contribution we review the physics choices made at the design stage and the expected performance of the setup. We will also focus on the description of the hardware installations made at the SASE2 line of the European XFEL.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP079
About •	paper received ※ 27 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP079	Effect of Heat Load on Cryo-Cooled Monochromators at the European X-Ray Free-Electron Laser: Simulations and First Experimental Observations	502
	I. Petrov, U. Boesenberg, M. Dommach, J. Eidam, J. Hallmann, K. Kazarian, C. Kim, W. Lu, A. Madsen, J. Möller, M. Reiser, L. Samoylova, R. Shayduk, H. Sinn, V. Sleziona, A. Zozulya EuXFEL, Schenefeld, Germany J.W.J. Anton, S.P. Kearney, D. Shu ANL, Lemont, Illinois, USA X. Dong SINAP, Shanghai, People’s Republic of China X. Dong SARI-CAS, Pudong, Shanghai, People’s Republic of China
	European XFEL (EuXFEL) generates high-intensity ultra-short pulses at MHz repetition rate. At hard X-ray instruments, cryo-cooled silicon monochromators are used to reduce pulse bandwidth. Here, first experimental observations during commissioning of a cryo-cooled monochromator at Materials Imaging and Dynamics (MID) instrument are presented and compared with heat flow simulations. A thermal relaxation time is estimated and compared with arrival time interval between pulses. This provides the repetition rate tolerable for stable operation of monochromator.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP079
About •	paper received ※ 19 August 2019 paper accepted ※ 25 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WED02	Absorbed Radiation Doses on the European XFEL Undulator Systems During Early User Experiments	569
	F. Wolff-Fabris, J. Pflüger, H. Sinn EuXFEL, Schenefeld, Germany W. Decking, D. Nölle, F. Schmidt-Föhre DESY, Hamburg, Germany A. Hedqvist, F. Hellberg Stockholm University, Stockholm, Sweden
	The EuXFEL is a FEL user facility based on a superconducting accelerator with high duty cycle. Three gap movable SASE Undulator Systems using hybrid NdFeB permanent magnet segments are operated. Radiation damage on undulators can impact the quality of the SASE process and ultimately threaten user operation. We observed [1] in the commissioning phase doses up to 4 kGy and 3% demagnetization effect in a diagnostic undulator. Currently all SASE systems are used for user photon delivery and in this work we present characteristics of the absorbed radiation doses on undulators under stable conditions. Doses on the upstream segments are found to be originated in the event of occasional high energy electron losses. In contrast, towards the downstream end of a SASE system, individual segments show persistent absorbed doses which are proportional to the transmitted charge and are dominated by low energy radiation. This energy-dependence depiction shall result in distinct radiation damage thresholds for individual segments. Portable magnetic flux measurement systems allow in-situ tunnel assessment of undulator properties in order to estimate radiation dose limits for future user operation. [1] F. Wolff-Fabris et al., J. of Phys. - Conf. Series 1067, 032025 (2018)
	Slides WED02 [7.344 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WED02
About •	paper received ※ 19 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WET01	Photon Transport Beamline Design
	H. Sinn EuXFEL, Hamburg, Germany
	Free Electron Lasers produce X-ray light with almost perfect coherence. The optical elements of the beam transport system have to fulfill therefore much more stringent - and in part also different - specifications compared to similar optics at synchrotron radiation sources. Another aspect of X-ray laser light is that it is generated in very intense and short pulses, which leads to the effect that the heat pile-up in anything intercepting the beam and can outrun the thermal transport on different time scales. This poses strong limitations on the suitable materials that can be used for mirror coatings, slits, attenuators and absorbers. Under certain conditions the beam can drill very fast through thick slabs of material, which opens up new possibilities for technical applications but poses also new challenges to the radiation safety system. This tutorial gives an overview of the basic relations needed to understand the physics of X-ray optics at free electron lasers and illustrates also experiences from the first two years of operation of the European XFEL.
	Slides WET01 [53.050 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP041	Interaction of Powerful Electro-Magnetic Fields With Bragg Reflectors	673
	I. Bahns, W. Hillert, P. Rauer, J. Roßbach University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany H. Sinn EuXFEL, Schenefeld, Germany
	Funding: supported by BMBF FKZ 05K16GU4 The interaction of an X-ray free electron laser (XFEL) with a Bragg Reflector can cause a change of the lattice constant, which has a direct influence on the stability of the reflection conditions [1] and can also excite modes of vibration [2]. The dynamical thermoelastic effects of the photon-matter-interaction are simulated with a finite-element-method (FEM) using the assumptions of continuums mechanics. To compare the simulation results with measured signals, a Michelson interferometer with ultrafast photodiodes (risetime <175ps, bandwith >2GHz) has been built up. To test the experimental setup in an in-house environment a pulsed UV laser is used to introduce a temporal displacement field in a silicon crystal created by about 0.26µJ of absorbed energy. The measured signal is in agreement with the FEM simulation and has shown that if averaging over thousands of pulses is applied a resolution <0.5pm is feasible. This makes this experimental setup useful to investigate the X-ray-matter-interaction of Bragg reflectors at modern X-ray facilities. [1] S. Stoupin et al., Physical Review B 86.5 (2012): 054301. [2] B. Yang, S. Wang and J. Wu, J. Synchrotron Rad. (2018) 25, 166-176.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP041
About •	paper received ※ 23 August 2019 paper accepted ※ 31 October 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Parallel Operation of SASE1 and SASE3 at the European XFEL

25

S. Liu, F. Brinker, W. Decking, L. Fröhlich, R. Kammering, D. Nölle, F. Obier, E. Schneidmiller, M. Scholz, T. Wilksen, M.V. Yurkov
DESY, Hamburg, Germany
R. Boll, N. Gerasimova, T. Mazza, M. Meyer, A. Scherz, H. Sinn
EuXFEL, Schenefeld, Germany

At the European XFEL a hard X-Ray SASE FEL (SA-SE1) and a soft X-Ray SASE FEL (SASE3) share in series the same electron beamline. This configuration couples the operation conditions for both undulators and their subsequent user experiments in terms of SASE in-tensity and background. We report on our experience in parallel operation and discuss the solutions that enable the operation of both undulators as independently as possible.

Slides TUA01 [13.809 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA01

About •

paper received ※ 26 August 2019 paper accepted ※ 17 October 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUA04

Harmonic Lasing Experiment at the European XFEL

29

E. Schneidmiller, F. Brinker, W. Decking, M.W. Guetg, S. Liu, D. Nölle, M. Scholz, M.V. Yurkov, I. Zagorodnov
DESY, Hamburg, Germany
G. Geloni, N. Gerasimova, J. Grünert, S. Karabekyan, N.G. Kujala, J. Laksman, Y. Li, J. Liu, Th. Maltezopoulos, I. Petrov, L. Samoylova, S. Serkez, H. Sinn, F. Wolff-Fabris
EuXFEL, Hamburg, Germany

Harmonic lasing is an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was successfully tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this contribution we present recent results from the European XFEL where we successfully demonstrated operation of HLSS FEL at 5.9 Angstrom and 2.8 Angstrom, in the latter case obtaining both 3rd and 5th harmonic lasing.

Slides TUA04 [1.174 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA04

About •

paper received ※ 20 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP009

Integration of an XFELO at the European XFEL Facility

62

P. Rauer, I. Bahns, W. Hillert, J. Roßbach
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
W. Decking
DESY, Hamburg, Germany
H. Sinn
EuXFEL, Schenefeld, Germany

Funding: Work supported by BMBF (FKZ 05K16GU4)
An X-ray free-electron laser oscillator (XFELO) is a fourth generation X-ray source promising radiation with full three dimensional coherence, nearly constant pulse to pulse stability and more than an order of magnitude higher peak brilliance compared to SASE FELs. Proposed by Kim et al. in 2008 [1] an XFELO follows the concept of circulating the light in an optical cavity - as known from FEL oscillators in longer wavelength regimes - but uses Bragg reflecting crystals instead of classical mirrors. With the new European X-ray Free-Electron Laser (XFEL) facility recently gone into operation, the realization of an XFELO with radiation in the Angstrom regime seems feasible. Though, the high thermal load of the radiation on the cavity crystals, the high sensibility of the Bragg-reflection on reflection angle and crystal temperature as well as the very demanding tolerances of the at least 60 m long optical resonator path pose challenges which need to be considered. In this work these problems shall be summarized and results regarding the possible integration of an XFELO at the European XFEL facility will be presented.
[1] K.-J. Kim, Y. Shvyd’ko and S. Reiche, Phys. Rev. Lett. 100 (2008), 244802.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP009

About •

paper received ※ 20 August 2019 paper accepted ※ 29 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP056

Feasibility Studies of the 100 keV Undulator Line of the European XFEL

172

E. Schneidmiller, V. Balandin, W. Decking, M. Dohlus, N. Golubeva, D. Nölle, M.V. Yurkov, I. Zagorodnov
DESY, Hamburg, Germany
G. Geloni, Y. Li, S. Molodtsov, J. Pflüger, S. Serkez, H. Sinn, T. Tanikawa, S. Tomin
EuXFEL, Hamburg, Germany

The European XFEL is a multi-user X-ray FEL facility based on superconducting linear accelerator. Presently, three undulators (SASE1, SASE2, SASE3) deliver high-brightness soft- and hard- X-ray beams for users. There are two empty undulator tunnels that were originally designed to operate with spontaneous radiators. We consider instead a possible installation of two FEL undulators. One of them (SASE4) is proposed for the operation in ultrahard X-ray regime, up to the photon energy of 100 keV. In this contribution we present the results of the first feasibility studies of this option.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP056

About •

paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP058

First Characterization of the Photon Beam at the European XFEL in July, 2017

180

V. Balandin, B. Beutner, F. Brinker, W. Decking, M. Dohlus, L. Fröhlich, U. Jastrow, R. Kammering, T. Limberg, D. Nölle, M. Scholz, A.A. Sorokin, K.I. Tiedtke, M.V. Yurkov, I. Zagorodnov
DESY, Hamburg, Germany
U. Boesenberg, W. Freund, J. Grünert, A. Koch, N.G. Kujala, J. Liu, Th. Maltezopoulos, M. Messerschmidt, I. Petrov, L. Samoylova, H. Sinn
EuXFEL, Schenefeld, Germany

North branch of the European XFEL, SASE1, produced first light on May 3rd, 2017, and XFEL operation has been gradually improved then. First characterization of the photon beam has been performed in July / August 2017, just before an official starting date of user experiments (September 1st, 2017). Energy of the electron beam was 14 GeV, bunch charge was 500 pC, photon energy was 9.3 keV. With photon diagnostics available at that time (X-ray gas monitor (XGM) and FEL imager) we measured the gain curve and traced evolution of the FEL radiation mode along the undulator. An important conclusion is that experimental results demonstrate reasonable agreement with baseline parameters. Developed techniques of the photon beam characterization also provided solid base for identification of the problems and means for improving SASE FEL tuning and operation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP058

About •

paper received ※ 20 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP079

Status of the Hard X-Ray Self-Seeding Setup at the European XFEL

242

G. Geloni, S. Karabekyan, D. La Civita, L. Samoylova, S. Serkez, R. Shayduk, H. Sinn, V. Sleziona, M. Vannoni, M. Yakopov
EuXFEL, Schenefeld, Germany
J.W.J. Anton, S.P. Kearney, D. Shu
ANL, Lemont, Illinois, USA
V.D. Blank, S. Terentiev
TISNCM, Troitsk, Russia
W. Decking, V. Kocharyan, S. Liu, E. Negodin, E. Saldin, T. Wohlenberg
DESY, Hamburg, Germany
X. Dong
European X-Ray Free-Electron Laser Facility GmbH, Schelefeld, Germany

A Hard X-Ray Self-Seeding (HXRSS) setup will be soon commissioned at the European XFEL. It relies on a two-chicanes scheme to deal, in particular, with the high pulse repetition rate of the facility. In this contribution we review the physics choices made at the design stage and the expected performance of the setup. We will also focus on the description of the hardware installations made at the SASE2 line of the European XFEL.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP079

About •

paper received ※ 27 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP079

Effect of Heat Load on Cryo-Cooled Monochromators at the European X-Ray Free-Electron Laser: Simulations and First Experimental Observations

502

I. Petrov, U. Boesenberg, M. Dommach, J. Eidam, J. Hallmann, K. Kazarian, C. Kim, W. Lu, A. Madsen, J. Möller, M. Reiser, L. Samoylova, R. Shayduk, H. Sinn, V. Sleziona, A. Zozulya
EuXFEL, Schenefeld, Germany
J.W.J. Anton, S.P. Kearney, D. Shu
ANL, Lemont, Illinois, USA
X. Dong
SINAP, Shanghai, People’s Republic of China
X. Dong
SARI-CAS, Pudong, Shanghai, People’s Republic of China

European XFEL (EuXFEL) generates high-intensity ultra-short pulses at MHz repetition rate. At hard X-ray instruments, cryo-cooled silicon monochromators are used to reduce pulse bandwidth. Here, first experimental observations during commissioning of a cryo-cooled monochromator at Materials Imaging and Dynamics (MID) instrument are presented and compared with heat flow simulations. A thermal relaxation time is estimated and compared with arrival time interval between pulses. This provides the repetition rate tolerable for stable operation of monochromator.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP079

About •

paper received ※ 19 August 2019 paper accepted ※ 25 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WED02

Absorbed Radiation Doses on the European XFEL Undulator Systems During Early User Experiments

569

F. Wolff-Fabris, J. Pflüger, H. Sinn
EuXFEL, Schenefeld, Germany
W. Decking, D. Nölle, F. Schmidt-Föhre
DESY, Hamburg, Germany
A. Hedqvist, F. Hellberg
Stockholm University, Stockholm, Sweden

The EuXFEL is a FEL user facility based on a superconducting accelerator with high duty cycle. Three gap movable SASE Undulator Systems using hybrid NdFeB permanent magnet segments are operated. Radiation damage on undulators can impact the quality of the SASE process and ultimately threaten user operation. We observed [1] in the commissioning phase doses up to 4 kGy and 3% demagnetization effect in a diagnostic undulator. Currently all SASE systems are used for user photon delivery and in this work we present characteristics of the absorbed radiation doses on undulators under stable conditions. Doses on the upstream segments are found to be originated in the event of occasional high energy electron losses. In contrast, towards the downstream end of a SASE system, individual segments show persistent absorbed doses which are proportional to the transmitted charge and are dominated by low energy radiation. This energy-dependence depiction shall result in distinct radiation damage thresholds for individual segments. Portable magnetic flux measurement systems allow in-situ tunnel assessment of undulator properties in order to estimate radiation dose limits for future user operation.
[1] F. Wolff-Fabris et al., J. of Phys. - Conf. Series 1067, 032025 (2018)

Slides WED02 [7.344 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WED02

About •

paper received ※ 19 August 2019 paper accepted ※ 27 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WET01

Photon Transport Beamline Design

H. Sinn
EuXFEL, Hamburg, Germany

Free Electron Lasers produce X-ray light with almost perfect coherence. The optical elements of the beam transport system have to fulfill therefore much more stringent - and in part also different - specifications compared to similar optics at synchrotron radiation sources. Another aspect of X-ray laser light is that it is generated in very intense and short pulses, which leads to the effect that the heat pile-up in anything intercepting the beam and can outrun the thermal transport on different time scales. This poses strong limitations on the suitable materials that can be used for mirror coatings, slits, attenuators and absorbers. Under certain conditions the beam can drill very fast through thick slabs of material, which opens up new possibilities for technical applications but poses also new challenges to the radiation safety system. This tutorial gives an overview of the basic relations needed to understand the physics of X-ray optics at free electron lasers and illustrates also experiences from the first two years of operation of the European XFEL.

Slides WET01 [53.050 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP041

Interaction of Powerful Electro-Magnetic Fields With Bragg Reflectors

673

I. Bahns, W. Hillert, P. Rauer, J. Roßbach
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
H. Sinn
EuXFEL, Schenefeld, Germany

Funding: supported by BMBF FKZ 05K16GU4
The interaction of an X-ray free electron laser (XFEL) with a Bragg Reflector can cause a change of the lattice constant, which has a direct influence on the stability of the reflection conditions [1] and can also excite modes of vibration [2]. The dynamical thermoelastic effects of the photon-matter-interaction are simulated with a finite-element-method (FEM) using the assumptions of continuums mechanics. To compare the simulation results with measured signals, a Michelson interferometer with ultrafast photodiodes (risetime <175ps, bandwith >2GHz) has been built up. To test the experimental setup in an in-house environment a pulsed UV laser is used to introduce a temporal displacement field in a silicon crystal created by about 0.26µJ of absorbed energy. The measured signal is in agreement with the FEM simulation and has shown that if averaging over thousands of pulses is applied a resolution <0.5pm is feasible. This makes this experimental setup useful to investigate the X-ray-matter-interaction of Bragg reflectors at modern X-ray facilities.
[1] S. Stoupin et al., Physical Review B 86.5 (2012): 054301.
[2] B. Yang, S. Wang and J. Wu, J. Synchrotron Rad. (2018) 25, 166-176.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP041

About •

paper received ※ 23 August 2019 paper accepted ※ 31 October 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)