FEL2017 - List of Authors (Kim, G.)

Paper	Title	Page
MOC01	0.1-nm FEL Lasing of PAL-XFEL
	H.-S. Kang, H. Heo, C. Kim, G. Kim, C.-K. Min, H. Yang PAL, Pohang, Kyungbuk, Republic of Korea
	The hard X-ray free electron laser at Pohang Accelerator Laboratory (PAL-XFEL) achieved saturation of a 0.144-nm free electron laser (FEL) beam on November 27, 2016, making it the third hard X-ray FEL in the world, following LCLS in 2009 and SACLA in 2011. On February 2, 2017, a saturated 1.52-nm FEL beam was also achieved in the soft X-ray FEL line with an electron beam energy of 3.0 GeV. Finally, saturation of a 0.104-nm FEL beam was achieved on March 16, 2017 using an electron beam energy of 9.47 GeV and K = 1.87. In this paper we present the commissioning result of PAL-XFEL as well as the beamline commissioning results.
	Slides MOC01 [7.020 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP058	Slippage-Enhanced SASE FEL	348
	J. Wu, A. Brachmann, K. Fang, A. Marinelli, C. Pellegrini, T.O. Raubenheimer, C.-Y. Tsai, C. Yang, M. Yoon, G. Zhou SLAC, Menlo Park, California, USA H.-S. Kang, G. Kim, I.H. Nam PAL, Pohang, Republic of Korea B. Yang University of Texas at Arlington, Arlington, USA
	Funding: The work was supported by the US Department of Energy (DOE) under contract DE-AC02-76SF00515 and the US DOE Office of Science Early Career Research Program grant FWP-2013-SLAC-100164. High-brightness XFEL is demanding for many users, in particular for certain types of imaging applications. Seeded FELs including self-seeding XFELs were successfully demonstrated. Alternative approaches by enhancing slippage between the x-ray pulse and the electron bunch were also demonstrated. This class of Slippage-enhanced SASE (SeSASE) schemes can be unique for FEL spectral range between 1.5 keV to 4 keV where neither grating-based soft x-ray self-seeding nor crystal-based hard x-ray self-seeding can easily access. SeSASE can provide high-brightness XFEL for high repetition rate machines not suffering from heat load on the crystal monochromator. We report start-to-end simulation results for LCLS-II project and PAL-XFEL project with study on tolerance. Performance comparison between SaSASE FEL and self-seeding FEL in the overlapping frequency range is also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-TUP058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOC01

0.1-nm FEL Lasing of PAL-XFEL

H.-S. Kang, H. Heo, C. Kim, G. Kim, C.-K. Min, H. Yang
PAL, Pohang, Kyungbuk, Republic of Korea

The hard X-ray free electron laser at Pohang Accelerator Laboratory (PAL-XFEL) achieved saturation of a 0.144-nm free electron laser (FEL) beam on November 27, 2016, making it the third hard X-ray FEL in the world, following LCLS in 2009 and SACLA in 2011. On February 2, 2017, a saturated 1.52-nm FEL beam was also achieved in the soft X-ray FEL line with an electron beam energy of 3.0 GeV. Finally, saturation of a 0.104-nm FEL beam was achieved on March 16, 2017 using an electron beam energy of 9.47 GeV and K = 1.87. In this paper we present the commissioning result of PAL-XFEL as well as the beamline commissioning results.

Slides MOC01 [7.020 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP058

Slippage-Enhanced SASE FEL

348

J. Wu, A. Brachmann, K. Fang, A. Marinelli, C. Pellegrini, T.O. Raubenheimer, C.-Y. Tsai, C. Yang, M. Yoon, G. Zhou
SLAC, Menlo Park, California, USA
H.-S. Kang, G. Kim, I.H. Nam
PAL, Pohang, Republic of Korea
B. Yang
University of Texas at Arlington, Arlington, USA

Funding: The work was supported by the US Department of Energy (DOE) under contract DE-AC02-76SF00515 and the US DOE Office of Science Early Career Research Program grant FWP-2013-SLAC-100164.
High-brightness XFEL is demanding for many users, in particular for certain types of imaging applications. Seeded FELs including self-seeding XFELs were successfully demonstrated. Alternative approaches by enhancing slippage between the x-ray pulse and the electron bunch were also demonstrated. This class of Slippage-enhanced SASE (SeSASE) schemes can be unique for FEL spectral range between 1.5 keV to 4 keV where neither grating-based soft x-ray self-seeding nor crystal-based hard x-ray self-seeding can easily access. SeSASE can provide high-brightness XFEL for high repetition rate machines not suffering from heat load on the crystal monochromator. We report start-to-end simulation results for LCLS-II project and PAL-XFEL project with study on tolerance. Performance comparison between SaSASE FEL and self-seeding FEL in the overlapping frequency range is also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-TUP058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)