FEL2017 - List of Authors (Bettoni, S.)

Paper	Title	Page
MOP038	Overview of the Soft X-Ray Line Athos at SwissFEL	125
	R. Ganter, S. Bettoni, H.-H. Braun, M. Calvi, P. Craievich, R. Follath, C.H. Gough, F. Löhl, M. Paraliev, L. Patthey, M. Pedrozzi, E. Prat, S. Reiche, T. Schmidt, A.Z. Zandonella PSI, Villigen PSI, Switzerland
	The Athos line will cover the photon energy range from 250 to 1900 eV and will operate parallel to the hard x-ray line Aramis of SwissFEL. Athos consists of fast kicker magnets, a dog-leg transfer line, a small linac and 16 APPLE undulators. The Athos undulators follow a new design: the so-called APPLE X design where the 4 magnet arrays can be moved radially in a symmetric way. Besides mechanical advantages of such a symmetric distribution of forces, this design allows for easy photon energy scans at a constant polarization or for the generation of transverse magnetic gradients. Another particularity of the Athos FEL line is the inclusion of a short magnetic chicane between every undulator segment. These chicanes will allow the FEL to operate in optical klystron mode, high-brightness SASE mode, or superradiance mode. A larger delay chicane will split the Athos line into two sections such that two colors can be produced with adjustable delay. Finally a post undulator transverse deflecting cavity will be the key tool for the commissioning of the FEL modes. The paper will present the current status of this four years project started in 2017.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-MOP038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP053	The ACHIP Experimental Chambers at PSI	336
	E. Ferrari, M. Bednarzik, S. Bettoni, S. Borrelli, H.-H. Braun, M. Calvi, Ch. David, M.M. Dehler, F. Frei, T. Garvey, V. Guzenko, N. Hiller, R. Ischebeck, C. Ozkan Loch, E. Prat, J. Raabe, S. Reiche, L. Rivkin, A. Romann, B. Sarafinov, V. Schlott, S. Susmita PSI, Villigen PSI, Switzerland E. Ferrari, L. Rivkin EPFL, Lausanne, Switzerland P. Hommelhoff University of Erlangen-Nuremberg, Erlangen, Germany J.C. McNeur Friedrich-Alexander Universität Erlangen-Nuernberg, University Erlangen-Nuernberg LFTE, Erlangen, Germany
	Funding: Gordon and Betty Moore Foundation The Accelerator on a Chip International Program (ACHIP) is an international collaboration, funded by the Gordon and Betty Moore Foundation, whose goal is to demonstrate that a laser-driven accelerator on a chip can be integrated to fully build an accelerator based on dielectric structures. PSI will provide access to the high brightness electron beam of SwissFEL to test structures, approaches and methods towards achieving the final goal of the project. In this contribution, we will describe the two interaction chambers installed on SwissFEL to perform the proof-of-principle experiments. In particular, we will present the positioning system for the samples, the magnets needed to focus the beam to sub-micrometer dimensions and the diagnostics to measure beam properties at the interaction point.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-TUP053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THB04	Two-Color Beam Generation via Wakefield Excitation
	S. Bettoni, E. Prat, S. Reiche PSI, Villigen PSI, Switzerland
	Several beam manipulation methods have been studied and experimentally tested to generate two-color photon beams in free electron laser facilities to accommodate the user requests. We propose to use the interaction of the beam with an oscillating longitudinal wakefield source to obtain a suitable electron beam structure. The bunch generates two sub-pulses with different energies and delays in time passing through a magnetic chicane after its longitudinal phase space has been modulated by the wakefield source. According to this approach, the power of the emitted radiation is not degraded compared to the monochromatic beam, and the set-up in the machine is quite simple because the bunch is manipulated only in the high energy section where the beam is more rigid. We present the design applied to SwissFEL. We identified the parameters and the corresponding range of tunability of the time and energy separation among the two sub-bunches. Reference: Phys. Rev. Accel. Beams 19, 050702 (2016)
	Slides THB04 [10.429 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Overview of the Soft X-Ray Line Athos at SwissFEL

125

R. Ganter, S. Bettoni, H.-H. Braun, M. Calvi, P. Craievich, R. Follath, C.H. Gough, F. Löhl, M. Paraliev, L. Patthey, M. Pedrozzi, E. Prat, S. Reiche, T. Schmidt, A.Z. Zandonella
PSI, Villigen PSI, Switzerland

The Athos line will cover the photon energy range from 250 to 1900 eV and will operate parallel to the hard x-ray line Aramis of SwissFEL. Athos consists of fast kicker magnets, a dog-leg transfer line, a small linac and 16 APPLE undulators. The Athos undulators follow a new design: the so-called APPLE X design where the 4 magnet arrays can be moved radially in a symmetric way. Besides mechanical advantages of such a symmetric distribution of forces, this design allows for easy photon energy scans at a constant polarization or for the generation of transverse magnetic gradients. Another particularity of the Athos FEL line is the inclusion of a short magnetic chicane between every undulator segment. These chicanes will allow the FEL to operate in optical klystron mode, high-brightness SASE mode, or superradiance mode. A larger delay chicane will split the Athos line into two sections such that two colors can be produced with adjustable delay. Finally a post undulator transverse deflecting cavity will be the key tool for the commissioning of the FEL modes. The paper will present the current status of this four years project started in 2017.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-MOP038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP053

The ACHIP Experimental Chambers at PSI

336

E. Ferrari, M. Bednarzik, S. Bettoni, S. Borrelli, H.-H. Braun, M. Calvi, Ch. David, M.M. Dehler, F. Frei, T. Garvey, V. Guzenko, N. Hiller, R. Ischebeck, C. Ozkan Loch, E. Prat, J. Raabe, S. Reiche, L. Rivkin, A. Romann, B. Sarafinov, V. Schlott, S. Susmita
PSI, Villigen PSI, Switzerland
E. Ferrari, L. Rivkin
EPFL, Lausanne, Switzerland
P. Hommelhoff
University of Erlangen-Nuremberg, Erlangen, Germany
J.C. McNeur
Friedrich-Alexander Universität Erlangen-Nuernberg, University Erlangen-Nuernberg LFTE, Erlangen, Germany

Funding: Gordon and Betty Moore Foundation
The Accelerator on a Chip International Program (ACHIP) is an international collaboration, funded by the Gordon and Betty Moore Foundation, whose goal is to demonstrate that a laser-driven accelerator on a chip can be integrated to fully build an accelerator based on dielectric structures. PSI will provide access to the high brightness electron beam of SwissFEL to test structures, approaches and methods towards achieving the final goal of the project. In this contribution, we will describe the two interaction chambers installed on SwissFEL to perform the proof-of-principle experiments. In particular, we will present the positioning system for the samples, the magnets needed to focus the beam to sub-micrometer dimensions and the diagnostics to measure beam properties at the interaction point.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2017-TUP053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THB04

Two-Color Beam Generation via Wakefield Excitation

S. Bettoni, E. Prat, S. Reiche
PSI, Villigen PSI, Switzerland

Several beam manipulation methods have been studied and experimentally tested to generate two-color photon beams in free electron laser facilities to accommodate the user requests. We propose to use the interaction of the beam with an oscillating longitudinal wakefield source to obtain a suitable electron beam structure. The bunch generates two sub-pulses with different energies and delays in time passing through a magnetic chicane after its longitudinal phase space has been modulated by the wakefield source. According to this approach, the power of the emitted radiation is not degraded compared to the monochromatic beam, and the set-up in the machine is quite simple because the bunch is manipulated only in the high energy section where the beam is more rigid. We present the design applied to SwissFEL. We identified the parameters and the corresponding range of tunability of the time and energy separation among the two sub-bunches.
Reference: Phys. Rev. Accel. Beams 19, 050702 (2016)

Slides THB04 [10.429 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)