Spataro, B.

Paper	Title	Page
TUPP051	Coupling Impedance of DAΦNE Upgraded Vacuum Chamber	1661
	F. Marcellini, D. Alesini, P. Raimondi, G. Sensolini, B. Spataro, A. Stella, S. Tomassini, M. Zobov INFN/LNF, Frascati (Roma)
	The DAΦNE Phi-factory at INFN LNF has been ugraded in the second half of 2007 with a scope to test a recently proposed scheme of crab waist collisions. The vacuum chamber of the collider has been substantially modified: two new low impedance interaction regions have been designed and installed, the new stripline injection kickers have been implemented, the old bellows have been substituted by the new ones and all ion clearing electrodes have been removed. In the paper we present the machine impedance study of these new vacuum chamber components and compare bunch lengthening measurements in the modified DAΦNE with simulation results.
TUPP066	CERN SPS Impedance in 2007	1691
	E. Métral, G. Arduini, T. Bohl, H. Burkhardt, F. Caspers, H. Damerau, T. Kroyer, H. Medina, G. Rumolo, M. Schokker, E. N. Shaposhnikova, J. Tuckmantel CERN, Geneva R. Calaga BNL, Upton, Long Island, New York B. Salvant EPFL, Lausanne B. Spataro INFN/LNF, Frascati (Roma)
	Each year several measurements of the beam coupling impedance are performed in both longitudinal and transverse planes of the CERN Super Proton Synchrotron to keep track of its evolution. In parallel, after the extensive and successful campaign of identification, classification and cure of the possible sources of (mainly longitudinal) impedance between 1998 and 2001, a new campaign (essentially for the transverse impedance this time) has started few years ago, in view of the operation of the SPS with higher intensity for the LHC luminosity upgrade. The present paper summarizes the results obtained from the measurements performed over the last few years and compares them to our predictions. In particular, it reveals that the longitudinal impedance is reasonably well understood and the main contributors have already been identified. However, the situation is quite different in the transverse plane: albeit the relative evolution of the transverse impedance over the last few years can be well explained by the introduction of the nine MKE kickers necessary for beam extraction towards the LHC, significant contributors to the SPS transverse impedance have not been identified yet.
WEXG02	Crabbed Waist Collisions in DAΦNE and Super-B Design	1898
	P. Raimondi, D. Alesini, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, F. Bossi, B. Buonomo, A. Clozza, G. O. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, F. Marcellini, G. Mazzitelli, C. Milardi, F. Murtas, L. Pellegrino, M. A. Preger, L. Quintieri, R. Ricci, U. Rotundo, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, S. Tomassini, C. Vaccarezza, M. Zobov INFN/LNF, Frascati (Roma) N. Arnaud, D. Breton, P. Roudeau, A. Stocchi, V. Variola, B. F. Viaud LAL, Orsay S. Bettoni CERN, Geneva P. Branchini roma3, Rome M. Esposito Rome University La Sapienza, Roma I. Koop, E. B. Levichev, P. A. Piminov, D. N. Shatilov, V. V. Smaluk BINP SB RAS, Novosibirsk K. Ohmi KEK, Ibaraki E. Paoloni University of Pisa and INFN, Pisa M. Schioppa INFN Gruppo di Cosenza, Arcavacata di Rende (Cosenza) D. Teytelman SLAC, Menlo Park, California P. Valente INFN-Roma, Roma
	The new idea of increasing the luminosity of a collider with crabbed waist collisions and first experimental results from DAΦNE using this concept are presented. Consequences for the design of future factories will be discussed. An outlook to the performance reach with crabbed waist collisions is given, with emphasis on future B Factories.
	Slides
WEPC075	Recent Results and Future Perspectives of the SPARC Project	2169
	M. Ferrario, D. Alesini, M. Bellaveglia, R. Boni, M. Boscolo, M. Castellano, E. Chiadroni, A. Clozza, L. Cultrera, G. Di Pirro, A. Drago, A. Esposito, L. Ficcadenti, D. Filippetto, V. Fusco, A. Gallo, G. Gatti, A. Ghigo, B. Marchetti, A. Marinelli, C. Marrelli, E. Pace, L. Palumbo, L. Pellegrino, R. Ricci, U. Rotundo, C. Sanelli, F. Sgamma, B. Spataro, F. Tazzioli, S. Tomassini, C. Vaccarezza, M. Vescovi, C. Vicario INFN/LNF, Frascati (Roma) A. Bacci, I. Boscolo, F. Broggi, F. Castelli, S. Cialdi, C. De Martinis, D. Giove, C. Maroli, V. Petrillo, A. R. Rossi, L. Serafini INFN-Milano, Milano M. Bougeard, B. Carré, D. Garzella, M. Labat, G. Lambert, H. Merdji, P. Salieres, O. Tchebakoff CEA, Gif-sur-Yvette L. Catani INFN-Roma II, Roma A. Cianchi Università di Roma II Tor Vergata, Roma F. Ciocci, G. Dattoli, A. Dipace, A. Doria, G. P. Gallerano, L. Giannessi, E. Giovenale, G. L. Orlandi, S. Pagnutti, A. Petralia, M. Quattromini, C. Ronsivalle, E. Sabia, I. P. Spassovsky, V. Surrenti ENEA C. R. Frascati, Frascati (Roma) M.-E. Couprie SOLEIL, Gif-sur-Yvette M. Mattioli, M. Serluca INFN-Roma, Roma M. Migliorati, A. Mostacci Rome University La Sapienza, Roma M. Petrarca Università di Roma I La Sapienza, Roma J. B. Rosenzweig UCLA, Los Angeles, California
	The SPARC project foresees the realization of a high brightness photo-injector to produce a 150-200 MeV electron beam to drive 500 nm FEL experiments in various configurations, a Thomson backscattering source and a plasma accelerator experiment. The SPARC photoinjector is also the test facility for the recently approved VUV FEL project named SPARX. As a first stage of the commissioning a complete characterization of the photoinjector has been accomplished with a detailed study of the emittance compensation process downstream the gun-solenoid system and the demonstration of the emittance oscillation in the drift. The second stage of the commissioning, that is currently underway, foresees a detailed analysis of the beam matching with the linac in order to confirm the theoretically prediction of emittance compensation based on the “invariant envelope” matching and the demonstration of the “velocity bunching” technique in the linac. In this paper we report the experimental results obtained so far and the scientific program for the near future.
WEPP036	DAΦNE Setup and Operation with the Crab-Waist Collision Scheme	2599
	C. Milardi, D. Alesini, M. E. Biagini, C. Biscari, R. Boni, M. Boscolo, F. Bossi, B. Buonomo, A. Clozza, G. O. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, F. Marcellini, G. Mazzitelli, F. Murtas, L. Pellegrino, M. A. Preger, L. Quintieri, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, S. Tomassini, C. Vaccarezza, M. Zobov INFN/LNF, Frascati (Roma) N. Arnaud, D. Breton, P. Roudeau, A. Stocchi, V. Variola, B. F. Viaud LAL, Orsay S. Bettoni CERN, Geneva P. Branchini roma3, Rome M. Esposito Rome University La Sapienza, Roma I. Koop, E. B. Levichev, P. A. Piminov, D. N. Shatilov BINP SB RAS, Novosibirsk K. Ohmi KEK, Ibaraki E. Paoloni University of Pisa and INFN, Pisa M. Schioppa INFN Gruppo di Cosenza, Arcavacata di Rende (Cosenza) V. V. Smaluk BINP, Novosibirsk P. Valente INFN-Roma, Roma
	In the second half of 2007 a major upgrade has been implemented on the Frascati DAΦNE collider in order to test the novel idea of Crab Waist collisions. New vacuum chambers and permanent quadrupole magnets have been designed, fabricated and installed to realize the new configuration. At the same time the performances of relevant hardware components, such as fast injection kickers and shielded bellows have been improved relying on new design concepts. The collider has been successfully commissioned in this new configuration. The paper describes the new layout as well as several experimental results about linear and non-linear optics setup and optimization, damping of beam instabilities and discusses the obtained luminosity performances.