| Paper |
Title |
Page |
| MOPC058 |
ALICE (ERLP) Injector Design
|
196 |
| |
- B. D. Muratori, Y. M. Saveliev
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
|
|
| |
In this paper we look at how the ALICE (formerly ERLP) injector has been re-designed to meet more realistic criteria from the previous design. A key component of ALICE is the high brightness injector. The ALICE injector consists of a DC photocathode gun generating 80 pC electron bunches at 350 keV. These bunches are then matched into a booster cavity which accelerates them to an energy of 8.35 MeV. In order to do this, two solenoids and a single-cell buncher cavity are used, together with off-crest injection into the first booster cavity, where the beam is still far from being relativistic. The performance of the injector has been studied using the particle tracking code ASTRA.
|
|
| MOPC062 |
Results from ALICE (ERLP) DC Photoinjector Gun Commissioning
|
208 |
| |
- Y. M. Saveliev, D. J. Holder, B. D. Muratori, S. L. Smith
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
|
|
| |
The Energy Recovery Linac Prototype (ERLP) DC photoinjector gun has been commissioned and the beam characteristics measured. The gun has demonstrated the nominal ERLP parameters of 350 keV electron energy, 80pC bunch charge and ~140 ps bunch length (at 10% level). The bunch parameters were measured at different bunch charges from 1 pC up to 80 pC. Special attention was given to measurements of the beam transverse emittance (using a movable slit), correlated and uncorrelated energy spread (using an energy spectrometer) and bunch length (using a transverse RF kicker) at each bunch charge. The effect of the 1.3 GHz RF buncher on the bunch length was also investigated. The experimental results are then compared with ASTRA simulations. Experimental results obtained from the investigation of several other issues including the beam characteristics in the presence of field emission from the cathode and in the presence of strong beam halo are also presented and discussed.
|
|
| MOPC063 |
Characterisation of Electron Bunches from ALICE (ERLP) DC Photoinjector Gun at Two Different Laser Pulse Lengths
|
211 |
| |
- Y. M. Saveliev, S. P. Jamison, L. B. Jones, B. D. Muratori
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
|
|
| |
In high-voltage DC photoinjector guns, the laser pulse duration affects the electron bunch characteristics and therefore is an important subject for experimental investigation and in the optimisation of the operation of the gun. Initial experimental study of this effect has been conducted using the Energy Recovery Linac Prototype (ERLP) photoinjector. During the commissioning of its DC photoinjector gun, the electron bunch parameters were measured at two laser pulse durations, ~7ps and ~28ps FWHM. The shorter laser pulse is the intrinsic output of the laser, while the longer pulse was produced with the use of a pulse stacker. The electron bunch parameters that were measured included transverse emittance, correlated and uncorrelated energy spread and bunch length. The experimental results and their comparison with computer simulations are presented and discussed.
|
|
| THPP004 |
EMMA - the World's First Non-scaling FFAG
|
3380 |
| |
- T. R. Edgecock
STFC/RAL, Chilton, Didcot, Oxon
- C. D. Beard, J. A. Clarke, C. Hill, S. P. Jamison, A. Kalinin, K. B. Marinov, N. Marks, P. A. McIntosh, B. D. Muratori, H. L. Owen, Y. M. Saveliev, B. J.A. Shepherd, R. J. Smith, S. L. Smith, S. I. Tzenov, E. Wooldridge
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
- J. S. Berg, D. Trbojevic
BNL, Upton, Long Island, New York
- N. Bliss, C. J. White
STFC/DL, Daresbury, Warrington, Cheshire
- M. K. Craddock
UBC & TRIUMF, Vancouver, British Columbia
- J. L. Crisp, C. Johnstone
Fermilab, Batavia, Illinois
- Y. Giboudot
Brunel University, Middlesex
- E. Keil
CERN, Geneva
- D. J. Kelliher, S. Machida
STFC/RAL/ASTeC, Chilton, Didcot, Oxon
- S. R. Koscielniak
TRIUMF, Vancouver
- F. Meot
CEA, Gif-sur-Yvette
- T. Yokoi
OXFORDphysics, Oxford, Oxon
|
|
| |
EMMA - the Electron Model of Many Applications - is to be built at the STFC Daresbury Laboratory in the UK and will be the first non-scaling FFAG ever constructed. EMMA will be used to demonstrate the principle of this type of accelerator and study their features in detail. The design of the machine and its hardware components are now far advanced and construction is due for completion in summer 2009.
|
|