Paper |
Title |
Page |
MOPCH161 |
Development of a Prototype Superconducting CW Cavity and Cryomodule for Energy Recovery
|
436 |
|
- P.A. McIntosh, C.D. Beard, D.M. Dykes, B. Todd
CCLRC/DL/ASTeC, Daresbury, Warrington, Cheshire
- S.A. Belomestnykh
Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
- A. Buechner, P. Michel, J. Teichert
FZR, Dresden
- J.M. Byrd, J.N. Corlett, D. Li
LBNL, Berkeley, California
- T. Kimura, T.I. Smith
Stanford University, Stanford, Califormia
- M. Liepe, V. Medjidzade, H. Padamsee, J. Sears, V.D. Shemelin
Cornell University, Ithaca, New York
- D. Proch
DESY, Hamburg
|
|
|
Energy Recovery LINAC (ERL) and LINAC-driven FEL proposals and developments are now widespread around the world. Superconducting RF (SRF) cavity advances made over the last 10 years for TESLA/TTF at 1.3 GHz, in reliably achieving accelerating gradients >20 MV/m, suggest their suitability for these ERL and FEL accelerators. Typically however, photon fluxes are maximised from the associated insertion devices when the electron bunch repetition rate is as high as possible, making CW-mode operation at high average current a fundamental requirement for these light sources. Challenges arise in controlling the substantial HOM power and in minimizing the power dissipated at cryogenic temperatures during acceleration and energy recovery, requiring novel techniques to be employed. This paper details a collaborative development for an advanced high-Qo cavity and cryomodule system, based on a modified TESLA cavity, housed in a Stanford/Rossendorf cryomodule. The cavity incorporates a Cornell developed resistive-wall HOM damping scheme, capable of providing the improved level of HOM damping and reduced thermal load required.
|
|
MOPCH175 |
High Power Testing RF System Components for the Cornell ERL Injector
|
472 |
|
- S.A. Belomestnykh, R.P.K. Kaplan, M. Liepe, P. Quigley, J.J.R. Reilly, C.K. Sinclair, V. Veshcherevich
Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
|
|
|
There are two high power 1300 MHz RF systms under development for the Cornell University ERL Injector. The first system, based on a 16 kWCW IOT transmitter, will provide RF power to a buncher cavity. The second system employs five 120 kWCW klystrons to feed 2-cell superconducting cavities of the injector cryomodule. All components of these systems were ordered and some have already been delivered, including the IOT transmitter (manufactured by Thales-BM), 20 kWCW AFT circulator, 170 kWCW circulators (Ferrite Co.) and two prototype input couplers for superconducting cavities. A special LN2 cryostat has been designed and built for testing/processing the input couplers. The results of the first high-power tests are presented.
|
|
MOPCH177 |
Status of HOM Load for the Cornell ERL Injector
|
478 |
|
- V.D. Shemelin, B. Gillett
Cornell University, Ithaca, New York
- P. Barnes, M. Liepe, V. Medjidzade, H. Padamsee, G.R. Roy, J. Sears
Cornell University, Laboratory for Elementary-Particle Physics, Ithaca, New York
|
|
|
The HOM load for the injector of the Energy Recovery Linac at Cornell University is proposed to work at a temperature of 80 K. The anticipated absorbed power of the load is up to 200 W. Versions with inner diameter of 78 and 106 mm are under development. Two different kinds of ferrites and a lossy ceramic are chosen as RF absorbers for the load to cover a wide frequency range. Measurements of electromagnetic properties of absorbing materials have been performed in a frequency range from 1 to 40 GHz. The engineering design of the load is ready and technological issues of brazing the absorbing tiles and cooling have been solved. Brazing quality is controlled by IR thermograms. First warm measurements of a prototype load are expected this summer.
|
|