| Paper |
Title |
Page |
| THPCH108 |
Status of SOLEIL Control Systems
|
3053 |
| |
- A. Buteau, P. Betinelli, L.S. Nadolski
SOLEIL, Gif-sur-Yvette
|
|
| |
The SOLEIL light source is a 2.75 GeV third generation synchrotron radiation facility under construction near Paris Storage ring commissioning is scheduled for April 2006 and 10 BL operation for the end of 2006. This paper will describe the technical solution choosen for the control systems of accelerators and beamlines, and will give the status of the deployment. On the hardware side, the SOLEIL Controls team has implemented an industrial approach using PLCs, standard Motion Controlers and CPCI Systems. The details of our technical choices and architectures will be described in this paper. On the software side, the SOLEIL Controls team has worked closely with ESRF's one on the TANGO framework since 2002. A quick tour on the TANGO software components used for SOLEIL Controls will be detailed. On the supervision layer, SOLEIL has choosen Java as the core technology, using javabeans components provided by the TANGO toolkit within an industrial SCADA (GlobalScreen). These tools and components for Graphical User Interface development will be presented. At last, an overview of the deployment of these systems on our installation will conclude this document.
|
|
| THPCH109 |
Control Applications for SOLEIL Commissioning and Operation
|
3056 |
| |
- L.S. Nadolski, A. Buteau, J. Chinkumo, R.C. Cuoq, X. Deletoille, M.O. Ounsy, S. Petit, K.S. Saintin
SOLEIL, Gif-sur-Yvette
|
|
| |
Synchrotron SOLEIL, the French third generation light source being commissioned in 2006, is the first facility using TANGO as a full control system. Control applications for operation and Beam Physics Dynamics have being developed using two major tools: the Matlab Middle Layer adapted from ALS and Spear3, and GlobalSCREEN, commercial SCADA software. Both tools are fully interfaced with the TANGO control system. In this paper, a sketch of the software architecture is shown. Then Storage Ring applications developed in house are presented. Finally configuration and database related applications (archiving, snapshot) are briefly described.
|
|
| THPLS009 |
First Results of the Commissioning of SOLEIL Storage Rings
|
3284 |
| |
- A. Nadji, J.C. Besson, P. Betinelli, P. Brunelle, A. Buteau, L. Cassinari, M.-E. Couprie, J.-C. Denard, J.-M. Filhol, P. Gros, C. Herbeaux, J.-F. Lamarre, P. Lebasque, M.-P. Level, A. Loulergue, A. Madur, P. Marchand, L.S. Nadolski, R. Nagaoka, B. Pottin, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette
|
|
| |
The commissioning of SOLEIL's storage ring will start in April 2006. The objective is to reach, within a first phase of two months, stable beam conditions at 100 mA in the multi-bunch mode that can be used for the commissioning of the beamlines. This is a challenging objective, especially because the SOLEIL's ring is incorporating some innovative techniques such as the use of a superconducting RF cavity, NEG coating for all straight parts of the machine and new BPM electronics. Prior to the start of the commissioning, some insertion devices and most of the insertion devices low gap vacuum vessels, including 10 mm inner vertical aperture vessels for the Apple-II type, will be installed on the ring. This paper will review the performances of all these equipment in presence of the beam. The results of the first commissioning runs will be presented.
|
|