| Paper |
Title |
Page |
| MOPCH040 |
Simulations for the FEL Test Facility at MAX-lab within EUROFEL
|
127 |
| |
- S. Thorin, M. Brandin, S. Werin
MAX-lab, Lund
- M. Abo-Bakr, J. Bahrdt, K. Goldammer
BESSY GmbH, Berlin
|
|
| |
Within the EUROFEL project a High Gain Harmonic Generation Free Electron Laser will be constructed at MAX-lab in collaboration with BESSY. The electron bunches will be created in the existing MAX-lab injector and transported to the inside of the MAX II ring where the FEL undulators will be located. To predict FEL performance and stability, simulations of the photo injector, linac, recirculator, transport and undulator sections as well as start to end simulations have been carried out.
|
|
| THPLS013 |
The Magnets of the Metrology Light Source in Berlin-Adlershof
|
3296 |
| |
- P. Budz, M. Abo-Bakr, K. Buerkmann-Gehrlein, V. Duerr, J. Kolbe, D. Krämer, J. Rahn, G. Wüstefeld
BESSY GmbH, Berlin
- I.N. Churkin, E.R. Rouvinsky, E.P. Semenov, S.V. Sinyatkin, A.G. Steshov
BINP SB RAS, Novosibirsk
- R. Klein, G. Ulm
PTB, Berlin
|
|
| |
PTB, the German National Metrology Institute in close cooperation with BESSY II, is currently carrying out the project of constructing the low-energy "Metrology Light Source" (MLS) as a synchrotron radiation facility situated in the close vicinity of BESSY II. Construction of the MLS housing is in progress and nearly finished. The user operation is scheduled to begin in 2008. Dedicated to metrology and technology development in the UV and EUV spectral range, the MLS will bridge the gap that is existent since the shutdown of BESSY I. A 100 MeV microtron delivered by Danfysik A/S will provide the electrons for the MLS with a structure of asymmetric double bend achromat. The total circumference of the MLS is 48 m. The electron energy is ramped to the desired value between 200 MeV and 600 MeV. The MLS magnetic lattice, consisting of 8 bending magnets, 24 quadrupole magnets, 24 sextupole magnets and 4 octupole magnets, is laid out to facilitate this operation. The contract for the MLS magnets is awarded to the Budker Institute for Nuclear Physics. A description of the MLS magnets based on the results of the factory acceptance tests should be presented.
|
|
| THPLS014 |
Status of the Metrology Light Source
|
3299 |
| |
- K. Buerkmann-Gehrlein, M. Abo-Bakr, W. Anders, P. Budz, O. Dressler, V. Duerr, J. Feikes, H.G. Hoberg, D. Krämer, P. Kuske, R. Lange, J. Rahn, T. Schneegans, D. Schueler, E. Weihreter, G. Wuestefeld
BESSY GmbH, Berlin
- R. Klein, G. Ulm
PTB, Berlin
|
|
| |
For more than 25 years, the Physikalisch-Technische-Bundesanstalt (PTB) uses synchrotron radiation at the storage rings BESSY I and II for photon metrology in the spectral range of UV to x-rays. Since decommissioning of BESSY I (1999), there is a gap in the spectral range of UV and EUV wavelength due to the higher electron energy of BESSY II. Thus, in 2003, the Metrology Light Source (MLS), a low energy electron storage ring, was approved, as central instrument in the future Willy Wien Laboratory (WWL). Design, construction and operation of the MLS are realized by BESSY, based on the PTB requirements for a permanent accessible radiometry source, optimized for the spectral range between UV up to VUV. The MLS is tuneable in energy between 200 MeV and 600 MeV, designed for currents between 1pA up to 200mA. Civil construction of WWL in the close vicinity to BESSY is nearing completion. The first MLS components will be installed in spring 2006, commissioning of the 100MeV Microtron is scheduled for summer 2006, while commissioning of the storage ring will start in spring 2007. Regular user operation will begin in January 2008. A status and an overview on the construction of the MLS are
|
|