COOL2015 - List of Authors (Abe, Y.)

Paper	Title	Page
FRYAUD01	Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory	182
	Y. Yamaguchi, Y. Abe RIKEN, Saitama, Japan F. Suzaki, M. Wakasugi RIKEN Nishina Center, Wako, Japan
	The Rare-RI Ring (R3) is an isochronous storage ring to measure masses of short-lived rare nuclei by using a TOF method. The expected precision of the measured mass will be of the order of ppm. A commissioning run using a 78Kr beam was performed in June 2015 and basic performances of R3 were verified. We succeeded in injecting a particle, which was randomly produced from a DC beam from cyclotrons, into the R3 individually* with a fast kicker system**, and in extracting the particle from the R3 1 ms after the injection. We measured TOF of the 78Kr particles between the entrance and the exit of the R3 to check the isochronism. Through the first-order adjustment with trim-coils imbedded on the dipole magnets of the R3, the isochronism on the 10-ppm order was achieved for the momentum spread of ±0.2 %. Higher-order adjustment employed in future will lead us to the isochronism on the order of ppm. In addition, we confirmed that a resonance-type Schottky pick-up successfully acquired the revolution frequency information of one particle in a storage mode. In this conference, the technical aspects of the R3 and prospects from the results of the beam commissioning will be discussed. A. Ozawa, et al., Prog. Theor. Exp. Phys. 2012, 03C009 I. Meshkov, et. al., Proceedings of EPAC 2004, Lucerne, Switzerland. * Y. Yamaguchi, et al., Proceedings of STORI'14, in press
	Slides FRYAUD01 [16.252 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory

182

Y. Yamaguchi, Y. Abe
RIKEN, Saitama, Japan
F. Suzaki, M. Wakasugi
RIKEN Nishina Center, Wako, Japan

The Rare-RI Ring (R3) is an isochronous storage ring to measure masses of short-lived rare nuclei by using a TOF method*. The expected precision of the measured mass will be of the order of ppm. A commissioning run using a 78Kr beam was performed in June 2015 and basic performances of R3 were verified. We succeeded in injecting a particle, which was randomly produced from a DC beam from cyclotrons, into the R3 individually** with a fast kicker system***, and in extracting the particle from the R3 1 ms after the injection. We measured TOF of the 78Kr particles between the entrance and the exit of the R3 to check the isochronism. Through the first-order adjustment with trim-coils imbedded on the dipole magnets of the R3, the isochronism on the 10-ppm order was achieved for the momentum spread of ±0.2 %. Higher-order adjustment employed in future will lead us to the isochronism on the order of ppm. In addition, we confirmed that a resonance-type Schottky pick-up successfully acquired the revolution frequency information of one particle in a storage mode. In this conference, the technical aspects of the R3 and prospects from the results of the beam commissioning will be discussed.
* A. Ozawa, et al., Prog. Theor. Exp. Phys. 2012, 03C009
** I. Meshkov, et. al., Proceedings of EPAC 2004, Lucerne, Switzerland.
*** Y. Yamaguchi, et al., Proceedings of STORI'14, in press

Slides FRYAUD01 [16.252 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)